You are reading the article 10 Tips To Fix Macbook Overheating Issue In 2023 updated in November 2023 on the website Hatcungthantuong.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested December 2023 10 Tips To Fix Macbook Overheating Issue In 2023
As time passes by and the MacBooks get older, they start having issues. Among these, the most infamous issue is overheating. Having the Mac on our lap becomes unbearable once it’s heated up. So what do you do when your MacBook is overheating?
In this article, I’ll give some solutions to prevent MacBooks from overheating. And if it does overheat, you don’t need to worry; you can take a look at some hardware-based and software-based solutions to sort your issues.What causes MacBook overheating?
Serval factors can cause your MacBook to overheat. One of the major reasons is the fan of your MacBook Pro being blocked. Another reason could be the use of a faulty charger. Or you could make some silly mistakes and cause damage to your MacBook.
Suppose you feel that your device is physically in great condition but is still overheating. In that case, software issues like heavy software bulk, unnecessary background processes, not shutting down at regular intervals, etc., could be the issues. The list is endless. Read on to find out more, as I will discuss these issues one by one.
How to stop your Mac from overheating?
Now that we know the MacBook overheating issues can be categorized into two sections let’s take a look at the solutions.
Pro tip: Try restarting your MacBook once. If that does not work, take a look at these technical solutions.Hardware-based solutions for overheating issue on MacBook
Now, if you think that there’s something off with the physical condition of the MacBook, then you can go through these quick checklists that can give you an idea if the overheating is due to physical damage or not.1. Unblock your Mac’s air vents
This is the most common mistake. Sometimes I’ve mistakenly obstructed my laptop’s vents, resulting in the MacBook Pro getting overheated. (I mean, there’s a reason why it throws out hot air.)
Also, keep cleaning the air vents with a small brush as they tend to get clogged by dust particles. You have no idea how much damage dust can cause!
Fun fact: Most MacBook overheating and fan failure issues are caused by clogged dust.2. Check if your charging cable is damaged
Yes, you read that right. Damaged charging cables can let your Mac down. When the charging brick or cable gets damaged and has an open wound, it starts inviting trouble. It may not give you a shock, but it can get surely heat up your Mac.
If the charging cable is damaged, replace it immediately to avoid any further casualty to the internal components.3. Use genuine Apple accessories
Sometimes low-quality accessories can cause your MacBooks to heat up. Apart from overheating, the use of poor-quality accessories can cut short the lifespan of your Mac.
Always use genuine MFi-certified accessories. It will increase the durability of your device and prevent further damage to it. It will also ensure your device continues to be under warranty cover.
Note: Apple will discard the warranty if you damage your product using a non-certified product.4. Unplug peripherals you don’t use
It’s important to keep an eye on all the external devices you have attached to your MacBook. It sometimes draws more power from the socket and can overheat your MacBook. As mentioned above, use only MFA-certified products. It won’t just ensure safety but also be a productivity addition to your MacBook.5. Ensure Mac’s internal components are genuine
If you have had something inside your MacBook changed or replaced – a memory upgrade, a fan change, etc., make sure the components you replaced or installed are genuine and are not some rip-off.
Honestly, I would suggest that if you wish to upgrade or change some internal components, get it done from Apple’s authorized service center.
It would be best if you were looking for these basic hardware solutions physically on your own, which are easy to solve. If your MacBook is still overheating, try some of these software fixes.
Software-based fixes for Mac overheating issue
Now that we have looked at some hardware solutions for your overheating Mac, here are some DIY software solutions.6. Cut down background processes
At times, we tend to get so busy with work that we forget to close the activities that we already have opened, and they are left running in the background. This could take a toll on your MacBook. Follow these steps to close all unnecessary background activities.
Go to Finder.
Tap on the Applications folder.
Apple gives us seamless software updates, but like any other software, it might also encounter some bugs. And those bugs might also push your MacBook a little more towards the warmer side. Update your macOS to the latest version of software to avoid any issues. To update, follow these steps:
Go to About This Mac.
Also, unless necessary, do not use beta software as it pushes the Mac to its limits.8. Enable the graphics settings of your MacBook
Turning on the graphic settings in the MacBook can help reduce overheating. It will help you sync your graphics with the CPU. To do so:
Do note that this setting might not be available on your M1 Mac. So far, this setting is available only on Intel-based MacBooks.9. Reset SMC on MacBook
No M1 Mac requires an SMC reset. The new, improved M1 chip handles all SMC functions, so these computers don’t even have a system management controller.
If your MacBook is Intel-based, then check out our guide on how to reset the SMC on your MacBook. Resetting the SMC can drastically reduce overheating issues.10. Customize energy saver settings
There have been times when you don’t have many tasks, yet your fan goes full throttle. This forces your Mac to heat up. Now what?
You can resolve this by using your MacBook’s in-built energy-saving mode. In this mode, your system will stop any apps from running in the background if they aren’t necessary. To enable Low Power Mode:
Go to System Preferences.
You may also like:
You're reading 10 Tips To Fix Macbook Overheating Issue In 2023
Everyone knows the sensation of touching their laptop after a long work session, only for it to feel closer to an active volcano than a delicate tool. MacBooks can be particularly prone to this problem, but the good news is there are ways to stop this problem before it starts.
An overheating MacBook can impact performance, cause your machine to run more slowly, and can even potentially damage your battery and reduce its overall capacity. Don’t wait until your computer becomes too hot to touch—take proactive steps to stop your MacBook from overheating.
Table of ContentsHow to Stop a MacBook From Overheating
If your MacBook tends to overheat, make sure you aren’t making these common mistakes.Allow Proper Ventilation
Everyone has seen the press images of someone laying in bed using their MacBook. While it’s certainly relaxing to lay in bed and browse social media, it’s not always the smartest move—especially if the fans are blocked.
The MacBook series of laptops tend to have only a single cooling fan without as much ventilation as an equivalent Windows laptop. This results in higher temperatures, but without the right ventilation your laptop can heat up even more. Ensure it’s on a level surface and nothing is blocking the vents.
Ensure your fans are in proper working order, too. If it sounds like a fan isn’t spinning or you can’t feel airflow, a fan might be blocked or the controller might be broken.Clean Your Mac
In the same vein as allowing proper ventilation, you want to keep your Mac as clean as possible. As dust and grime build up on your laptop, it can sometimes block airflow within the MacBook and stop it from cooling properly.
By using electronic cleaning wipes at least once per week, you can eliminate anything that might have blocked the flow through the machine.Update Software
macOS updates are more than yearly changes that bring an updated interface. Your macOS update is one of the most important modifications you’ll make to your PC and brings along with it new features, security patches, and performance optimization.
An out-of-date MacBook may be more prone to overheating. If Apple technicians discover a glitch in the code that could cause problems, an update will be released to fix it. Without making these updates, you leave your system open to threats and vulnerabilities.Check Mac Activity
The Activity Monitor lets you see all currently active programs on your machine, as well as those that are using the most resources. If your CPU is overtaxed, closing the most intensive programs can free up resources.
If there are any programs that you don’t recognize, do a bit of research on them to make sure it isn’t a rootkit or malware or some other less-than-pleasant application. If it isn’t a necessary application or one you’re currently using, end the process. The less load you place on your CPU, the less likely your machine is to overheat.Shut Down Browser Tabs
Every browser tab you have open demands a certain amount of your system resources—especially Chrome, a notorious offender for using a ridiculous amount of power. If possible, avoid Chrome and stick to more resource-friendly browsers like Safari or Firefox.
While it might be a meme that people open 20 different browser tabs and leave them open, you shouldn’t do that. If you have browser tabs open that you no longer need, shut them down. Not only will your machine run that much faster, but it will help stop your MacBook from overheating.Use Official Chargers
If you lose your MacBook charger, you might be tempted to invest in a lower-cost one; after all, the official charger costs more than $80. Resist this temptation. The unofficial chargers on the market are not as reliable as the official ones. In addition, they can end up causing damage to your battery.
Damage to a laptop battery can cause more than shortened battery life. Overheating batteries can sometimes explode and seriously injure the user. Use only trusted chargers to ensure you cause no damage to your MacBook or yourself.Replace Your Battery
If your MacBook battery is too old, it might begin to heat up while in use or when charging. If this is the case, the only real fix is to replace the battery with a newer version. You can find batteries for purchase through eBay, or on the official Apple website.
You can use an older battery for a long time; in fact, MacBooks have a built-in battery analysis tool. While you can replace the battery at home, we don’t recommend it. It’s often better to have an authorized repair shop to handle the fix, especially if your MacBook is covered under warranty. You can see the prices to replace a Mac battery by Apple on their website.Check For Malware
While it’s uncommon, Mac computers can and do get infected with viruses and malware from time to time. One of the biggest signs that your system has an unwanted guest hitching a ride is overheating. If your MacBook is consistently warming up, look for antivirus software for your MacBook.
Ubisoft has become very popular with its hundreds of games, spanning across multiple genres and generations of consoles.
You can choose to purchase games and download them with one of its popular game distribution services, Uplay.
But sometimes your days may get ruined when you come across problems like Uplay connection lost.
You might encounter this problem while opening the portal thus face problems while you connect to the Uplay servers on your version.
Through this article, we shall try to explore some ways to fix this annoying issue and render you smoother gaming experience.
Your firewall protection or the programs running in the background may create trouble.
Sometimes there may be corruption with the DNS cache files which may generate Uplay connection lost issue as well.
Besides, you need to check the proxy settings in case the game is not properly configured.
Let us now discuss about some viable solutions to tackle the problem. Have a look!
Sometimes your Firewall can create problem by blocking the connection of your Uplay. In case there is any software conflict you will face such issues like Uplay not working.
To resolve the problem, you may temporarily disable the Firewall protection service and hope this will enable you to solve the problem with your uplay connection.
Step 1: Open your Settings and then select the Update And Security window.
Step 2: Now from the given options choose Windows Security. Now select the Firewall And Network Protection Service.
Next choose your network and disable Firewall. Now check if this has solved your problem.
You may have been using some antivirus programs for your protection. Even these can create problem with your uplay connection. So, try configuring these applications properly to enable Uplay run smoothly using your local connection.
For further protection it is recommended to shut down the Internet Connection Sharing programs (ICS) and VPN, since any of these may also interfere with your games.
If you failed to connect to Uplay, check the configuration. Sometimes the Uplay may be configured to start offline each time you tend to open it.
The proxy settings on your Windows 10 may also create connection issues for Uplay.
Follow the below mentioned steps to solve the problem:
Step 1: Launch your Uplay. Then from the top right side, hit on the Menu icon.
Step 2: Now from the displayed options choose Settings. Now select Always Start Uplay In Offline Mode and uncheck the option.
Step 3: Now check the Proxy Settings options in case there are some problems with its configuration. Minutely check the configuration and make changes if needed.
Some background applications may be corrupted which generates Uplay not working issue.
So, here I recommend you that before starting any game from Uplay, close all the apps running in the background to ensure that those should not create any trouble while gaming.
Try closing all the background apps and check whether this helps to solve the problem.
Step 1: Open the Settings and then go to the Privacy window.
Now, select the Background Apps option as shown in the picture below.
Step 2: Next navigate for Choose Which Apps Can Run In The Background option. Then proceed by turning off the toggle switch for all the applications.
This will disable all the apps running in the background. Close the window and then launch your game.
When you turn off the background apps it will give you a smooth gaming experience.
If you find that this solves your Uplay oriented problem, then make sure one of the apps was preventing internet access to your gaming servers.
It is especially important to flush DNS as they keep the IP addresses of the servers that you have recently visited.
So, flushing the DNS cache is an effective solution as these files may be somewhat corrupted and cause problem with your internet connection.
Follow the steps mentioned below top accomplish the task:
Step 1: Go to your Windows start option and enter CMD there to open Command prompt.
Step 2: When you get into the Command prompt window, enter:
ipconfig /flushdns in the given window.
Step 3: Then hit the enter key. Now you will get a message that the flushing procedure has been completed as I have shown in the picture below.
These instructions are viable only for your Windows 10. After you have successfully done the steps check whether this has checked the issue.
Your Windows uses the host files for mapping the IP addresses for hosting names.
So, you need to check this out and do some resetting. Here is a full guide for resetting the host files:
Step 1: First of all, you need to download the default host file and then extract it and copy the same to:
Step 2: Then hit the replace button. After this in case there is any problem with your host files, it will resolve the issue.
This is a quite common solution in case you have any connectivity issues with your Uplay.
This is perhaps the last suggestion that I may give you in case you could not find any answer to Uplay not connecting issues.
Hope this article has helped you to seek the best solution when you encounter the Uplay connection lost.
If you have any more ideas or suggestions related to this topic, please feel free to use the dedicated section below.
You can also shoot us a mail if you have any further queries. We always look forward to hearing from you.
The latest iOS 15 system update is chock full of features and quality-of-life improvements and iPhone users are not wasting any time to download the package and update their devices. However, many of them are getting a ‘failed verification’ error, telling them that they’re not connected to the internet. Here’s how to go about fixing it and install iOS 15 and ensure that you get the latest firmware update and all the goodies that come along with it.
A few iPhone users are experiencing difficulties in getting the latest iOS 15 update. When they tap on the “Install now” button, instead of starting the download, their iPhone throws up a message telling them that it is “Unable to Verify Update”. It goes on to say that “iOS 15 failed verification because you are no longer connected to the Internet”.
For some users, updating to iOS 15 can become an agonizing prospect as it sometimes fails right at the end so that all their patience was for naught.
Related: Why is iOS 15 Not Installing? 12 Fixes You Can Try!
How to fix the “Failed Verification” issue on iOS 15
Here are a few possible fixes to resolve this issue and get your iPhone updated to the latest firmware.
Fix #01: Turn off your VPN
That’s a pretty easy and basic solution, right? But it works. Try it yourself — this will get it fixed for you most probably.
Another update lying downloaded on your device might also cause this issue. So, try to find and delete one.
Now, in the list of all apps, find an app called Update. Tap on the Update app and then tap the “Delete Update” button.
Download the new update and the issue should be fixed now.
Fix #03: Check Wi-Fi connection
Perhaps the most obvious fix, but one that takes a jiffy to check. If you’re not connected to the internet or don’t have enough signal strength, then the update cannot be verified or begin. You may also want to ensure that the connected network is actually providing internet access, and is not just a dead network.
Fix #04: Restart your iPhone
Sometimes, the worm is in your iPhone itself and can only be weeded out by giving your iPhone a soft reset. A simple restart can go a long way to fix internal glitches, reload background apps and the iOS firmware itself. So simply restart your iPhone and check to see if the update starts and finishes successfully.
Fix #04: Reset network settings
The source of the problem can also lie in how your network connections are managed. If there’s a limitation to the number of connections that a network can hold, you may not be able to connect to it.
Furthermore, the network settings themselves can sometimes cause disruptions with the connection and leave you with inconsistent internet access. Resetting your network settings and reconnecting to your network can fix this issue and allow you to resume the iOS 15 update. Here’s how to do this:
Open the Settings app and tap on ‘General’.
Tap on ‘Transfer or Reset iPhone’.
Tap on ‘Reset’.
Select ‘Reset Network Settings’.
Fix #06: Ensure there’s enough storage space
Updating to iOS 15 requires you to have sufficient storage space on your iPhone so that the package can be downloaded first. The update is roughly 3.2GB in size so make sure you can free up at least that much space for the update. For this, you can try deleting old, unused files, games that are lingering on your iPhone, or unnecessary images and video clips.
We hope the above fixes helped you solve the update issues and get you updated to iOS 15.
Microsoft undoubtedly infused all its resources and efforts into making the new Windows 11. It includes many new cool features and improvements, which makes it more efficient than its earlier version. But one thing which remains the same in Windows 11 is the battery drain issues. For instance, many users mentioned that their system’s battery is dying too quickly after upgrading to the new Windows 11.
Thankfully, these battery drain issues can be fixed by making some small changes to the system’s settings. So, if your Windows 11 laptop’s battery is depleting too fast, then here are a few changes you should make to fix the Windows 11 battery drain issue with ease.
Why Is Your Windows 11 PC’s Battery Draining Fast?
One of the most common causes of Windows 11’s battery drain issues is unoptimized programs. But there could be several more reasons for the Windows 11 battery drain issue. You can check all the other reasons below:
Enabled Fast Startup
Unnecessary Applications Running in the Background
Refresh Rate Set to Maximum
Using Light Theme
Increased Lock Screen Timeout
Outdated Battery Drivers
High Screen Brightness
Fix the Windows 11 Battery Drain Issue
Here are some of the most working workarounds that can help you fix the Windows 11 battery drain issue. So, let’s start with the first fix.
1. Check Your Laptop Battery Health
Before trying any other workarounds mentioned in this guide, we recommend you to check your laptop’s battery health. If your system’s battery health has diminished a lot and has a lot of issues, then there’s no point in trying other solutions, as nothing can fix them.
In that case, the only possible way to fix the battery’s health is to replace the battery with a new one. You can follow the below-mentioned steps to know whether your laptop needs a battery replacement or not:
1. First, open the Command Prompt app on your system with admin rights and execute the below-listed command.powercfg /energy
2. After executing the above command, wait for about 60 seconds to get your system’s battery report.
3. Once the scan gets completed, it’ll display a file path in the console. You must copy and paste the location into the File Explorer utility’s top navigation bar.
You can now analyze the battery health report after opening it on your system and decide what to do next.
2. Reduce the Screen Brightness
If the battery report seems good, then it’s possible that your system’s high screen brightness is causing this issue. When we set our screen brightness level to High, it uses more power than usual.
Due to this, the battery capacity depletes faster. Keeping this in mind, we suggest you reduce your screen’s brightness to Medium or Low and then check the issue’s status. You can check the below-mentioned steps to know how to do so:
2. You’ll now see two sliders and some options in the QAC. The first slider from the top is to control the screen’s brightness level.
3. You can use the Brightness slider to set your screen’s brightness level to Low or Medium if it’s currently set to High.
Once you’ve reduced your screen’s brightness, you can continue using your computer normally. But make sure to check your system’s battery level at different intervals to know whether the battery is still depleting quickly.
3. Use Your PC In Dark Mode
You can use the new Windows 11 in both dark mode as well as light mode. But we’ve noticed that the dark mode consumes less battery compared to the light mode. Therefore, we recommend you switch your system’s theme to dark from light to check whether it improves the situation. You can check the below-mentioned instructions to change your Windows 11 system’s theme to the dark theme:
1. To start, press the Windows + I shortcut to open the Settings app and select Personalization from the left navigation pane.
2. Once the Personalization section is opened, move to the Colors section to customize your system’s theme.
3. Then, select the Dark option from the Choose your mode dropdown to set your system’s current theme to Dark.
Once you’ve changed your system’s theme to Dark, keep using your system normally and observe your battery status while using it to know whether the battery is still decreasing at the same rate or improving.
4. Enable the Battery Saver
Sadly, if none of the above-mentioned workarounds help you eliminate the Windows 11 battery drain issue, then you should consider using your system in battery saver mode. Battery saver automatically closes the system’s apps and tasks that consume a lot of system battery.
As a result, it helps the system limit battery consumption to make it run for a longer time. So, enable the Battery saver mode on your system to eliminate the battery drain issues with ease. Follow the below steps to learn how to enable the Battery saver on your system:
1. To start, open the Settings app on your Windows system and navigate to the Power & battery section of it.
3. Then, set the Turn battery saver on automatically at option to 30% to automatically enable the Battery saver once it reaches the 30% battery mark.
4. Lastly, enable/disable the Lower screen brightness when using battery saver option according to your preference. We suggest keeping this option disabled as it helps reduce the system’s battery consumption.
Once you’ve enabled the Battery saver mode on your system, you’ll now notice that the battery is draining too slowly.
Tip: You can also enable/disable the Battery saver mode on your Windows system from the Quick Action Center.
5. Decrease Your Display’s Refresh Rate
If you’re a professional gamer, then you would have set your display’s refresh rate higher than 60 Hz. It’s indeed great, as it provides you with smoother motion. But it’s found that keeping the display’s refresh rate high consumes more of the system’s battery.
This is the reason we suggest users keep the refresh rate at 60 Hz. Here are the steps to clock down your system’s refresh rate:
2. Once the Settings section is opened, expand the Display section and then jump to the Advanced display section.
3. Then, select the 60 Hz option from the Choose a refresh rate dropdown in the Advanced display section.
Once you’ve changed the refresh rate, restart your PC, and check whether the battery is still draining at the same speed as earlier.
6. Decrease Time for Lock Screen Timeout
Sometimes, we leave our Windows system inactive for hours without shutting it down or putting it to sleep. Hence, it becomes idle and keeps consuming battery at the same rate, which causes battery drain issues. This is the reason we always suggest users keep their system’s sleep timeout settings low.
This quickly turns off the Windows system when you step away from it after the specified time. As a result, it saves the system’s battery health and fixes the Windows 11 battery drain issue with ease. You can also lower your system’s screen and sleep timeout settings by following the below-mentioned steps:
1. First, open the Settings app on your Windows system and proceed to the Power & battery section of it.
2. In the Power & battery section, expand the Screen and sleep section to modify your system’s screen and sleep settings.
3. Then, select 1 minute from On battery power, turn off my screen dropdown.
4. In the end, set the On battery power, put my battery to sleep after option to 1 minute as well to put on sleep after the specific time.
7. Adjust Battery Video Playback
Windows 11 lets us watch videos in HDR. But when we play videos in HDR, it consumes more battery power. This is because it automatically raises the screen brightness to provide a great viewing experience.
Therefore, we recommend you adjust your system’s video playback settings to save the system’s battery while watching videos in HDR. We’ve explained the process to do the same below with ease:
1. Press the Windows + I keyboard shortcut to proceed to the Settings area of your system and then open the Apps section.
3. Lastly, set the Battery options to Optimize for battery life to save your system’s power while playing videos in HDR.
8. Change the Power Plan Settings
Some users said they fixed the Windows 11 battery drain issue by changing their system’s power plan settings. We also recommend you do the same and check whether it fixes the issue. You can check the below steps to know what exactly they did to optimize their system’s battery for better battery performance:
4. Then, scroll to the Multimedia settings option and expand it to view all the system’s multimedia settings.
5. Now, expand the Video playback quality bias section, and set the On battery option to video playback power-saving bias.
6. Once done, expand the When playing video section and set On battery to Balanced, and Plugged in to Optimize video quality.
9. Prevent Unnecessary Apps From Running in the Background
One of the most common reasons for the high battery drain issues is the programs running in the background. Therefore, we recommend you ensure that no unnecessary programs are operating in the system’s tray.
To check this, open Task Manager and close all inessential programs running in the background. Doing so will save the system’s battery and fix the battery drain. Follow the below steps to do the same:
1. Firstly, press the Ctrl + Shift + Esc keys simultaneously to open the Task Manager utility on your system.
3. In the end, select End task from the contextual menu to terminate it and then perform the same with other tasks.
After closing all the unnecessary apps, you’ll notice that the system is running smoother, and the battery is also reducing slowly.
10. Tweak Display Settings
Some users mentioned that making some minor changes to the system’s graphics settings can also resolve the issue. Specifically, they changed the system’s Graphic Preferences to Power saving, which helped them reduce their system’s high battery usage.
So, you can also try the same and check whether it fixes the issue. You can follow the below-mentioned steps to know what they did and what you need to do:
1. To do so, you need to open the Settings app on your Windows device and move to the Display section.
Once done, perform the same steps with all high power-consuming tasks, such as games, editing tools, etc.
It could be possible that your system’s battery drivers have some bugs, which is why the system’s battery is draining too fast. In that case, we suggest you update your system’s battery drivers to eliminate all the bugs with it.
You can easily update the adapters from the Device manager of your Windows 11 system. Follow the below process to know how to update your system’s battery drivers:
1. First, open the Run dialog using the Windows + R shortcut, type devmgmt.msc in it and press the Enter key.
4. In the end, if there are new driver updates to install, then the system would already install them automatically.
12. Disable Fast Startup
All Windows systems come with Fast startup pre-enabled, which helps reduce the system’s start time by preventing unnecessary programs and services from starting at the startup. No doubt, it helps a lot in improving the user experience. But sometimes, it stops essential Windows services from running.
Keeping this in mind, we recommend you disable Fast Startup on your system and check whether it improves battery health. You can check the below-mentioned steps as it explains the same with ease:
1. First, open the Control Panel utility on your system and proceed to the Hardware and Sound section of it.
3. Then, select the Change settings that are currently unavailable option in the Shutdown settings section.
4. Lastly, disable the Turn on fast startup (recommended) option in the same section and save the changes.
13. Run Power Troubleshooter
Windows 11 has many built-in troubleshooters, one of which is the Power troubleshooter. This troubleshooter helps you find power issues in your system and automatically fixes them to make sure that it works properly without any battery drain issues.
As the issue you’re also facing is power-related, you can run the Power troubleshooter on your system to fix it. You can check the below steps to know how to do the same:
1. To run the Power troubleshooter, open the Settings app on your PC and navigate to the Troubleshoot section.
2. Next, proceed to the Other troubleshooters section from the Troubleshoot section and search for Power in the Others section.
If the high battery consumption issues are still there, then they may appear because of some bugs in the device. It’s also possible that Microsoft has already released a new update with some fixes to fix these bugs, and you haven’t installed it yet.
In that case, we recommend you search for new OS updates and install them. You can check the below-mentioned instructions know how to update a Windows 11 PC to the latest build:
1. First, proceed to the Settings section of your system and select Windows Update from the left navigation pane.
15. Reset the Device
If updating the operating system doesn’t resolve the battery drain issues with your system, then you can consider resetting it. Doing so will revert all your system’s settings to the default state. Along with this, it’ll also wipe out your system’s data to fix the issue. Due to this reason, this solution might not be appropriate for some users.
If you’re one of them, then wait for developers to release new updates to fix these issues. But if you’re ready to do so, then follow the below-mentioned process to know to do the same:
1. To do so, open the Settings app on your device and move to the Recovery section of the System category.
Is Windows 11 Worse for Battery Life?
Although the new Windows 11 is almost stable now. But many users are still experiencing high battery drain issues on their Windows 11 PC. According to the affected users, their Windows 11 system’s battery is draining at a faster rate after updating it to the new Windows 11. You can try upgrading your Windows system to the latest Windows 11 and check whether the high battery consumption issues are still there.
Should Windows 11 Be Avoided?
If you think that the new Windows 11 isn’t stable right now, then there’s no reason you should upgrade your system to. You can stick to the previous Windows 10, as it has all the must-have features, such as Auto HDR, VMs. etc. You can update your system to Windows 11 when it’s completely stable and ready to install.
Why Is Windows 11 Draining Battery?
There could be several reasons behind the Windows 11 battery drain issue. But one of the most common causes is the unnecessary programs running in the background. Another possible reason could be the pre-enabled Fast startup feature.
Does Dark Mode Save Battery Windows 11?
Windows 11 comes with both dark mode and light mode. But the dark mode consumes less battery, compared to the light mode. You can switch your system’s theme to dark from the Personalization settings of the system.
Does Windows 11 Use Battery Faster?
Some users said that Windows 11 consumes more battery. Whereas some users said that they didn’t find any change in the battery or power consumption after the new upgrade. So, this could be different in your case.
Right now, many users are experiencing severe battery drain issues on their Windows 11 PC. According to them, their Windows system’s battery is dying too fast after upgrading it to the newest and latest Windows 11. Luckily, this issue can be fixed. Therefore, we shared some possible fixes to eliminate these battery drain issues in this guide.
So, if your Windows 11 laptop’s battery was also draining fast, then we hope the workarounds mentioned in this troubleshooting guide helped you fix it. If we helped you eliminate the Windows 11 battery drain issue, then make sure to share which of the above-mentioned workaround helped you fix it.
Earlier Apple used to sell iPhone with as low as 64GB storage capacity. Now 128GB is the lowest storage capacity for the latest models like iPhone 13 Pro and Max. However, even 128GB will run out in no time if you keep lots of videos and games in iPhone. If you frequently see “iPhone Storage Full” warning message then it is time to cleanup your phone. In this article, we will explain how to check the available storage, find the apps using more space and cleanup them to fix iPhone storage full issue.
Fix iPhone Storage Full IssueWhy Should You Cleanup Your iPhone?
Housekeeping is a good habit and necessary for using any device for long time. Since, you are not going to buy a new iPhone model every few years, you should keep your iPhone clean to work productively. Besides housekeeping, here are some more reasons you need enough storage space.
You will notice the iPhone goes unresponsive or the apps started crashing due to insufficient storage space.
Related: Learn how to increase storage space in Mac by cleaning up other and system data?How to Check Current iPhone Storage Capacity?
After iOS upgrade, many users complain they get the “iPhone Storage Full” warning message, though there is enough free space available. Sometimes, it could be a bug that your iPhone shows wrong warning. Therefore, the first step before you try to clean up the data is to check the free capacity of your iPhone. You can do this in the following two manners:From About Section:
Tap on “Settings” app and go to “General” section.
You will see an option called “About” at the first and tap on it.
Here you can find the total capacity along with free space available on your phone.
You can also find how many songs, videos, photos and applications are there on your phone to understand which type of files could occupy more space. However, you will not find the exact consumption in this section.
iPhone About SectionFrom iPhone Storage Section:
Check iPhone Storage with Apps
Scroll down to the bottom of the section to find how much space is occupied by iOS and System Data. As you can see, iOS occupies 8.81GB space, hence you need similar space when downloading and upgrading to newer iOS version.
iOS and System Data
Note: Do not get confused with “iCloud Storage” and “iPhone Storage”. iCloud storage is for the cloud storage space and you have to check the iPhone storage section to get the storage capacity of your phone.Cleanup iPhone to Increase Storage
Depending upon the storage space situation, you can take the next step to clean up your iPhone.1. Find Apps Consuming Large Space
As you can see in the above screen, WhatsApp app occupies 1.27GB size. When we tap on the WhatsApp app, it shows the detailed storage consumption like below. Though the actual app is only 97.4MB in size, it has 1.18GB of documents and data. This could be chat history and media files received through the app.
Delete or Offload App
You can take two actions to free up the space:
Offload App – this will delete the app and keep the documents/data. when you reinstall the app, your iPhone will restore all documents and data.
Delete App – this will delete both app and data completely.
The action depends on the type of app and your requirement to keep the data or delete it. You may not need the documents/data for some social apps like Facebook, Twitter or YouTube. However, you may need to keep the data for other apps like WhatsApp and WeChat.2. Remove the Clutter and Delete Apps
If you have hundreds of apps installed on your iPhone over period, it’s high time to delete unused apps. For this you do not need to go through the above method. Simply tap and hold on the app and select “Remove App”.
Remove App from iPhone
On the next pop-up, select “Delete App” to get rid of the app permanently from your iPhone. You can follow this process for apps that you no more needed on the phone.
Delete App Permanently
Note: Selecting “Remove from Home Screen” option will just remove the app icon from the home screen. Actual app and data will be still on your phone consuming storage space.3. Enable iCloud Photos
Apple offers 5GB free iCloud storage for all users and you can upgrade the plan to get additional storage up to 2TB. You can make use of this iCloud storage space to keep all your original high-resolution pictures to free up space on your iPhone.
Optimize iCloud Photo Storage
This can be super useful to free up space when you larger number of high-resolution photos.
Related: How to cleanup Windows PC to increase storage space?4. Delete Large Files
Though iPhone has “Files” app, it is not convenient to browse and find larger files. The easy way is to connect your iPhone with Mac and find the files by category and size. If you find large videos, audiobook or books, you can delete them to increase the storage space.
Browse and Delete Larger Files5. Delete Messages
By default, you iPhone will keep all the messages received in Messages app forever. This may not be necessary and occupy space if you send/receive plenty of messages.
Set Messages Storage Duration6. Clear Safari Browsing History
Browsers cache the data to speed up the website loading. However, cache can easily pile up if you visit too many sites and occupy large space on your iPhone. You can simply delete the Safari browser cache to release some storage space.
Safari Website Data
As you can see it is 932MB which you can delete by tapping on “Remove All Website Data” link.
Similarly, when you are in Safari settings page, tap on “Clear History and Website Data” option. This will clear both website data and browsing history which could release additional storage space.
Clear Safari History
Note: If you Chrome, Firefox or other browser, you may need to clear the history separately from the browser app’s settings.7. Using Third-Party Apps
There are plenty of third-party apps available for cleaning up your iPhone for different purposes.
Try apps to clear app caches and memory.
Find and delete large junk files.
Find duplicate photos and videos and delete them in bulk.
You can try these apps to simply your task in deleting unwanted files especially when you want to clean up duplicate files.Final Words
We hope one of the above listed options could help you fix iPhone storage full issue and release the space. You can also follow additional options like taking low resolution photos in camera and clean up your backups. If you are facing problems when installing iOS, make sure to have at least 10GB free space for downloading and installing the upgrade. As mentioned, sometimes it could be a bug and upgrade your iOS version when the patch is available to get rid of the wrong warning message about the storage.
Update the detailed information about 10 Tips To Fix Macbook Overheating Issue In 2023 on the Hatcungthantuong.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!