Trending December 2023 # 4.8M Vehicle Fiat Chrysler Recall After Cruise Control Refuses To Turn Off # Suggested January 2024 # Top 17 Popular

You are reading the article 4.8M Vehicle Fiat Chrysler Recall After Cruise Control Refuses To Turn Off updated in December 2023 on the website Hatcungthantuong.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested January 2024 4.8M Vehicle Fiat Chrysler Recall After Cruise Control Refuses To Turn Off

4.8m vehicle Fiat Chrysler recall after cruise control refuses to turn off

Fiat Chrysler Automobiles is warning owners of 4.8 million vehicles in the US not to use cruise control, after discovering a flaw that could leave drivers unable to deactivate it. A recall is underway for all of the vehicles, which span FCA’s Dodge, Jeep, Chrysler, and Ram lines, and include sedans, SUVs, and pickups.

The issue, the automaker insists, depends on “extraordinary circumstances” taking place, according to Mark Chernoby, Fiat Chrysler’s chief technical compliance officer. When a car is traveling uphill with cruise control enabled, the system automatically accelerators to maintain the speed that has been set. If that coincides with a short-circuit in a specific electrical network, it turns out, the driver of the car would be left unable to turn the cruise control off.

“However, if this sequence of events were to occur, cruise-control acceleration can be overpowered by the vehicle’s brakes,” FCA points out. “The vehicle may also be stopped by shifting it into neutral and braking accordingly. Regardless of the mitigation strategy, the vehicle may be placed in park once it has stopped, at which point cruise-control is cancelled.”

According to Fiat Chrysler, no crashes or injuries have been recorded in relation to the cruise control problem. However, the automaker is aware of at least one report of a driver unable to turn cruise control off. That happened in a 2023 Dodge Journey, which had been supplied as a rental car.

The full list of affected vehicles in the US can be found below. It spans the 2014 to 2023 model years, and includes popular models like the Ram 1500 pickup truck, Chrysler Pacifica minivan, and Jeep Wrangler SUV. All are gasoline powered and have automatic transmissions.

Together, the 4.8m vehicles impacted “account for more than 200 billion travel miles,” the automaker says, presumably to point out that the issue is particularly rare. FCA says that it already has a remedy for the issue, which involves installing new software to the Powertrain Control Module. That’s the device which, among other things, is responsible for handling cruise control.

“We have a remedy and a widespread network of engaged dealers who are preparing to deliver service,” FCA’s Chernoby says. The fix will, unsurprisingly, be installed free of charge, and the automaker will begin alerting those customers affected from next week. They’ll need to book an appointment with their FCA dealer, since there’s no facility for upgrading the hardware with an OTA update.

The National Highway Traffic Safety Administration (NHTSA) has weighed in too, adding its own recommendation that it “strongly encourages vehicle owners to follow” FCA’s warning.

Dodge Journey MY 2014-2023 SUV

Dodge Durango MY 2014-2023 SUV

Dodge Challenger MY 2023-2023 2-Door

Dodge Charger MY 2014-2023 4-Door

Ram 3500 MY 2014-2023 Pickup Truck

Ram 3500 Cab Chassis MY 2014-2023 Pickup Truck

Ram 3500 Less Than 10,000 Pound Cab Chassis MY 2023-2023 Pickup Truck

Ram 2500 MY 2014-2023 Pickup Truck

Ram 4500/5500 Cab Chassis MY 2014-2023 Pickup Truck

Ram 1500 MY 2014-2023 Pickup Truck

Jeep Wrangler MY 2023 SUV

Jeep Grand Cherokee MY 2014-2023 SUV

Jeep Cherokee MY 2014-2023 SUV

Chrysler 300 MY 2014-2023 4-Door

Chrysler Pacifica MY 2023-2023 Van

Chrysler 200 MY 2023-2023 4-Door

You're reading 4.8M Vehicle Fiat Chrysler Recall After Cruise Control Refuses To Turn Off

Why My Projector Won’T Turn Off?

Projector won’t turn off? Here’s 3 quick solutions for you

424

INSTALL BY CLICKING THE DOWNLOAD FILE

Try Outbyte Driver Updater to resolve driver issues entirely:

This software will simplify the process by both searching and updating your drivers to prevent various malfunctions and enhance your PC stability. Check all your drivers now in 3 easy steps:

Download Outbyte Driver Updater.

Launch it on your PC to find all the problematic drivers.

OutByte Driver Updater has been downloaded by

readers this month.

A major reason why your projector may not be turning off can be due to configuration corruption. It can also happen due to hardware failure or other minor issues. Many users have reported that their projector refuses to turn off in the Reddit community forums.

I’ve had it for about a year with frequent use and it’s never done this. Holding the power button (or any button/combo) doesn’t seem to work. From AAXA technologies, but their support doesn’t have anything like this.

Follow the troubleshooting tips in this article to troubleshoot my projector won’t turn off issue.

How do you turn off a projector?

1. Double-press the Power Button

Some projectors are configured to avoid accidental power-offs/shutdown and require the users to press the Power key or the power button the remote twice to turn off.

So, if you haven’t tried, already, try to press the Power button on the projector or on remote twice and check if that helps.

If that doesn’t work, press and hold the power button on the projector for 30 sec to turn off the projector forcefully.

Ensure that your projector is properly connected to your PC by following this extensive guide.

2. Force Shutdown the Projector

If the issue persists, to diagnose the projector you need to reboot it again. To do that, you probably need to force turn off the projector by pulling the power plug from the projector.

Once the projector is off and you have pulled off all the plugs, make sure you let the projector lamp/bulb cool down for about 30 minutes.

After the 30 minutes, turn on the projector and check if you can turn it off using the power button.

If the projector is turning off normally, you need not do anything else as it was a temporary glitch.

3. Other Solutions to Try

If the issue persists, it is possible that the projector has internal hardware issues. Contact the projector maker to get better troubleshooting idea for your projector.

Check if the projector has any pending firmware update which may include bug fixes. So, try to update the projector to the latest version of the firmware available and check for any improvements.

You can perform the firmware update on your own using the computer or send it to the projector manufacturer authorized dealer. The failed projector firmware update is not covered under warranty. So do it at your own risk.

How To Mute Ipad To Turn Off Sound And Audio Output

Want to turn off sound on an iPad and mute the audio? You can do that rather simply with a few different methods, though some may be easy to overlook. The iPad and iPad Pro have volume adjustment buttons which can serve as mute, and there’s also a designated software mute switch for alerts which when activated will silence the sound coming from the device. While older iPad models had a hardware mute switch, the latest iPad and iPad Pro models removed the physical button in lieu of the hardware volume buttons or onscreen silencing function that when toggled mutes all alert sound and audio output from the iPad speakers or any connected headphones.

Using mute on iPad is simple, we will review both how to mute an iPad to turn off all sound, and how to unmute an iPad to re-enable sound and audio output on the device, as well as using Silent Mode. These tips apply to all newer iPad and iPad Pro models with a modern iOS release.

How to Mute iPad & Turn Off Sound

To mute the iPad and silence all audio and sound from the device, do the following:

Press the Volume Down button on the side of the iPad or iPad Pro repeatedly until the screen shows “Mute”

How to Toggle ON Silent Mode on iPad or iPad Pro

You can also disable the sound of alerts through Control Center:

Swipe down from the top right corner of iPad screen to access Control Center in modern iOS *

Look for and tap on the bell icon to mute the iPad

The iPad is now in “Silent Mode” and all audio is mute

The bell icon becomes highlighted when Mute is active on iPad.

When muted, iPad will play no sound at all, whether in any apps, alerts, notifications, or otherwise. No audio will play out of the iPad or iPad Pro regardless of where the sound is coming from, including all apps, and the iOS system itself.

* If you need help figuring out how to use and access Control Center in new iOS releases, read this article for iPad and iPhone.

Optional iPad Mute / Silence All Sound Method

Another optional mute approach to silencing iPad is to use the volume adjustments in Settings, or the volume buttons button repeatedly until the sound is disabled.

This approach to muting iPad and iPad Pro can be reversed by simply turning the volume back up again, either with the volume button or Sound Settings.

How to Unmute iPad & Turn Sound Back On

To unmute iPad / iPad Pro and regain audio and sound output on the device, do the following:

Press the Volume Up button repeatedly on iPad or iPad Pro until the volume of sound is on again

Toggle Out of Silent Mode on iPad

You can also toggle out of Silent Mode by doing the following:

To unmute iPad, return to open Control Center

Tap on the bell icon

Use the sound meter in Control Center to adjust volume as desired, or Press volume up button repeatedly to turn up iPad sound if needed

Once unmuted, iPad and iPad Pro will play sound and audio as usual again, at the volume level that the iPad is currently set to.

You can toggle the mute / silent button on and off at any time and for any reason from Control Center, and it works the same on all models of iPad Pro and iPad with any modern iOS release.

Why isn’t my iPad playing sound? Help my iPad is stuck on silent!

A common question that many iPad and iPad Pro users have pertains to sound output and why their iPad is not playing sound. If that happens to you and your iPad appears stuck on silent and mute, first check to make sure that Mute is not enabled by verifying that bell icon for silent mode. Then press the Volume up button repeatedly on iPad / iPad Pro so that audio output is high enough that you can hear the sound.

While older iPad models had a hardware mute switch (that also doubled as orientation lock depending on your settings), it’s highly unlikely that future iPad models will ever regain the hardware mute switch again as Apple has a fondness for removing physical buttons and ports from their devices. For now the iPhone retains the mute switch, but that may not last long either, that remains to be seen. But the mute and unmute feature is still there, it’s just now in software and a simple swipe away.

Pc Monitor Turns Off After A Few Minutes Randomly

If your PC monitor turns off after a few minutes randomly, you can follow these solutions to get rid of this problem. There could be various reasons why your computer monitor turns off automatically after a few minutes. Here we have explained some of the common causes and solutions so that you can troubleshoot the issue within moments.

PC Monitor turns off after a few minutes randomly

If your PC monitor turns off after a few minutes, do the following:

Check cable connections

Check Power settings

Verify graphics card

Restart/reinstall/update graphics driver

Third-party software

Before you begin, restart the graphics driver on your PC and see if that helps.

1] Check cable connections

It is the very first thing you need to verify when you are getting the aforementioned issue. If the cable or port is quite old, there is a chance of having a loose cable issue. As a result, your monitor will not work normally, and eventually, you will have problems like this one. Therefore, before heading towards other solutions, you need to check if you have a loose cable or port. You must check the monitor as well as the graphics card’s port.

2] Check Power settings

Windows 11/10 comes with a few settings that determine when your computer screen will turn off. It is there to save the battery life of your laptop. However, the same setting is present on the desktop computer as well. If you have set things up incorrectly, you might get the above-mentioned problem for sure. Therefore, do the following to verify the Sleep settings:

Search for the control panel in the Taskbar search box.

Select the Choose when to turn off the display.

Select Never from the drop-down list.

Following that, your problem will be resolved.

3] Verify graphics card

If your graphics card is having issues or not functioning well, your monitor won’t work well. There could be various things that might happen with your display, and being turned off is one of them. At times, dust could be a reason why it might not work correctly. If so, it is recommended to check if the graphics card is working fine or not. For this, you may need to take the help of professional PC support staff.

4] Restart/reinstall/update graphics driver

If you are using a graphics card, you may need to check if any updates are available for the display or graphics driver. might need to install the driver. Follow this guide to update the graphics driver.

Read: Screen won’t turn off after the specified time in Windows

5] Third-party software

There are some apps that often do various things on your PC. For example, some apps let you customize the Power plan on Windows 11/10. If you have installed such an app on your computer, it might cause the same problem. Other Power management software from OEMs are known to cause conflicts and consequently this issue. That is why it is suggested to find such an app and disable it on your PC.

The best way to identify the offending or problematic software would be to boot in Clean Boot and then try to troubleshoot manually.

Bonus tip: Overheating could also be responsible for this issue. If your monitor is overheating after a few minutes of usage, it might be turned off automatically.

Monitor turns off after boot

If the monitor turns off after boot, the solutions are the same as above. You need to upgrade the graphics driver, change the Power settings, disable Hybrid Shutdown, etc. On the other hand, you also need to check for loose ports, overheated monitors, etc.

Read: Computer boots to black or blank screen with blinking cursor

Why does my monitor turn off after a few minutes?

There could be multiple reasons why your monitor might turn off after a few minutes. From overheating, loose cable, port, etc., to incorrect Power settings, anything could cause such an issue. However, you can get rid of this problem by following the aforementioned guides.

Why does my monitor go black after a few minutes?

Overheating is one of the most common reasons why your monitor goes black after a few minutes of usage. To troubleshoot this problem, you need to check if you have a loose cable or port. Following that, you need to check if you have a faulty graphics card or driver or not. If nothing helps, it is suggested to head to the service center.

How To Turn On Or Off Professional Mode In Facebook On Iphone

In this guide, I’ll explain what professional mode on Facebook means and how to enable it on your iPhone. Without further ado, let’s get started!

What is professional mode on Facebook?

This mode is specifically designed for entrepreneurs trying to promote their businesses or individuals seeking to build a professional network on the platform. It, furthermore, features specialized tools like Insights for business pages and Workplace by Facebook – a collaborative workforce environment.

How to enable professional mode on Facebook from iPhone

Launch the Facebook app on your iPhone.

Tap the menu bar icon at the bottom right and go to your profile.

Press the three-dot icon next to the Edit Profile option.

Tap Turn on to continue with the setup of the professional mode.

How to disable professional mode on Facebook from iPhone

If you have tried out this feature and are seeking back the solitude for your account, the steps below will help you out.

Launch the Facebook app → Go to your profile → Tap the three-dot icon.

Choose Turn professional mode off.

Wait for the changes to take place and the Confirmation page to appear.

This procedure will revert your account to a normal interface like before.

If you’re trying out Professional Mode for the first time, you might wonder, what’s in the package? Let’s break down the update, tools, and safety features a user gets upon enabling Professional Mode on Facebook.

Users can update their profiles in professional mode to represent their professional lives. They can add information about their job titles, qualifications, employment history, and accomplishments. These updates can assist in showcasing their area of expertise to potential clients or business partners.

Followers: Users can increase their followers by inviting friends, promoting their page on other social media platforms, and sharing their content with relevant groups. This helps users to expand their reach and connect with a broader audience.

Profile Category: To make things easier for the audience looking for your page, you can categorize your profile according to a particular domain, such as a musician, artist, or journalist.

As the name suggests, this mode offers a series of really amazing tools at your disposal.

Professional Dashboard: Manage your insights in the form of performance metrics for various factors, for e.g.: follower growth. You can further manage your posts and messages efficiently.

Invite friends to follow: Increase your audience and widen the reach of your page by inviting your friends to follow your page.

Post composer: Create high-quality content, including photos, videos, and stories without any hassle. To ensure that your content is published at an optimal time, you can schedule your posts as per your preference.

Creator support: It provides an ultimate hub for all Facebook’s recourses, like tools, training guides, and community support – all in one place. Make the most of this tool and hone your skills to improve the visibility of your page.

Get discovered: Finally, by using relevant hashtags and keywords, users can increase their notability and reach on the platform.

Monetize your content

Through fan subscriptions and ad income sharing, this tool enables individuals to monetize their material. It is very helpful for content producers who create user-friendly, high-quality content that is popular among users.

Subscriptions: You can start subscriptions for your users by offering exclusive content. This can include behind-the-scenes footage, early access to your content, or exclusive merchandise.

Safety features

Last but not least, security is a very prominent factor that cannot be overlooked under any circumstances. So, let’s see how Professional Mode will help you to keep your account safe.

Privacy: Designate and take control of the users who can access your profile. You can report or block accounts on Facebook that violate the rules and regulations of the platform.

FAQs

Regardless of the device you use, iPhone or Android, Professional Mode in Facebook can take your business or profile to new heights. This tool is nothing less than a blessing in disguise. So go ahead and give it a try. I’m certain you’ll love the results.

Thank you for reading. Don’t hesitate to leave your thoughts below.

Author Profile

Yash

Turn Windows Features On Or Off; Manage Windows Optional Features In Windows 11/10

The Windows operating system offers several additional features that most of us may not need. But they are there if you need them! In this post, we will see how to Turn Windows features On or Off via the Control Panel, and how to add, remove or manage some Optional Features using Windows 11/10 Settings. PowerShell and Command Prompt methods have also been discussed here.

Manage Windows Optional Features in Windows 11/10

While the default installation is good for most of us, there may be some features that IT Pro’s, System Administrators or Developers may need. Windows allows you to install and activate such features. You can turn some features on or off using the Control Panel, or you may need to use the Settings app in Windows 11/10 if you need to add some optional features.

What are Optional features?

As the name implies, Windows Optional features are the features that may or may not be required by Windows users. Windows OS has an option to add or remove these features. We have already explained the process to manage Optional features in Windows 11/10 in this article.

How do I add or remove Windows features?

The option to add or remove Windows features is available in the Control Panel or Windows Settings. We have described the process to install Windows features on Windows 11/10 computers above in this post. You can do it in 5 ways.

1] Turn Windows features On or Off using Control Panel

The steps to turn Windows features on or off via Control Panel are the same for both Windows 11 and Windows 10 computers. Hence, it does not matter whether you are a Windows 11 or Windows 10 user, the procedure that we have explained below implies to both of these operating systems.

On a Windows Pro PC, you will see the following features that you can enable or disable at will.

.NET Framework 3.5

.NET Framework 4.6 Advanced Services

Active Directory Lightweight Services

Containers

Data Center Bridging

Device Lockdown

Hyper-V

Internet Explorer 11

Internet Information Services

Internet Information Services Hostable Web Core

Legacy Components like DirectPlay

Media Features

Microsoft Message Que Server

Microsoft Print to PDF

MultiPoint Connector

Print and Document Services

RAS Connection Manager Administration Kit

Remote Differential Compression API Support

RIP Listener

Services for NFS

Simple Network Management Protocol

Simple TCPIP services

SMB 1.0/CIFS Sharing Support

SMB Direct

Telnet Client

TFTP Client

Windows Identity Foundation 3.5

Windows PowerShell 2.0

Windows Process Activation Service

Windows Subsystem for Linux

Windows TIFF IFilter

Work Folders Client

XPS Services

XPS Viewer.

See this post if your Turn Windows Features on or off is blank or empty.

2] Manage Optional features via Windows Settings Windows 11

Windows 11 users have to go through the procedure explained below to manage optional features via Settings.

Launch Windows 11 Settings app.

Install or Optional features as per your requirements.

Let’s discuss these steps in detail.

1] Press Win + I keys to launch the Settings app.

You have to wait till Windows uninstalls that feature.

4] Now, let’s see how you can install an Optional feature in Windows 11. Microsoft has made some features optional in Windows operating system, as they may or may not be required by the users. Notepad and Wordpad are among the optional features in Windows 11/10. This is the reason why some users have found Notepad or Wordpad missing from their computers.

Windows 10

In this way, you can install Graphics Tools, Windows Developer Mode, Fonts and several other optional features like it.

3] Enable or Disable Optional Windows Features using Powershell

Windows Powershell is indeed a very powerful tool. You can do a lot of things with this command line too. While using this, we will first populate the list of available features, then we will be downloading the desired feature, and finally, we will be talking about enabling and disabling that feature.

So first, to populate the list of features, enter this command,

Get-WindowsOptionalFeature -Online

Get-WindowsOptionalFeature -Online -FeatureName *Type feature name*

Then, to enable any downloaded feature, enter this command,

Enable-WindowsOptionalFeature -Online -FeatureName “Type feature name” -all

Finally, to disable any enabled feature, enter this command,

Disable-WindowsOptionalFeature -Online -FeatureName “Type feature name” 4] Turn On or Off Optional Windows Features using Command Prompt

Now, type in the following command to populate the list of available features:

All you need to do now is copy the name of the feature that you need to enable.

DISM /online /enable-feature /featurename:[Enter the name of the feature here] -All

Now, to disable any feature that is enabled on your computer, you need to follow some separate steps.

DISM /online /disable-feature /featurename:[Enter the name of the feature here] -All

As a bonus, if you wish to check information in detail about a specific feature, enter this command,

DISM /online /get-featureinfo/featurename:[Enter the name of the feature here] 5] Enable or Disable Optional Windows Features using an external installation source

You can also fetch the latest features from an updated offline source.

This source can be an ISO or any other type of image or just a folder.

For that, all you need to do is decide if you want to use the Command Prompt or Windows Powershell.

If you are using the Command Prompt, enter this command,

And if you tend to use Windows Powershell command line, you can do it too. Just enter this command,

To get the latest features, you need to get the latest version of the image of the operating system that you are trying to install the feature from.

I hope this helps!

Related: Turn Windows features on or off stuck on Please wait.

Update the detailed information about 4.8M Vehicle Fiat Chrysler Recall After Cruise Control Refuses To Turn Off on the Hatcungthantuong.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!