You are reading the article Background Eraser Tool In Photoshop updated in November 2023 on the website Hatcungthantuong.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested December 2023 Background Eraser Tool In Photoshop
Overview of Background Eraser Tool in PhotoshopBackground Eraser Tool in Photoshop is the simplest or quickest way to remove background or any part from background Image in Photoshop. The background eraser tool is the best possible combination of the quick selection tool and eraser tool.
The Background Eraser tool is extremely useful for photographs which consist of many small details along with edges with objects you would like to cut out and the background of photographs. For example, images with hair, fur, skies, etc.
Start Your Free Design Course
3D animation, modelling, simulation, game development & others
How to Use the Background Eraser Tool in Photoshop?The Photoshop Interface with Background Eraser Tool Selected
Now, let’s take a look at the actual process of removing the background color. Here in this photograph below, there is a white background color.
I have put one more layer down of an actual photo, which is blue in color. I had to create this layer because when we are removing the white color from the original photo, we can see precisely how accurately it got removed. I would recommend that while practicing or erasing any background from an image. Always put one more layer to double-check before proceeding for further changes.
Little confusing, right? Let me show you an actual process in another image below.
Here, I can explain this to you in more detail. You can see the blue background while we are removing the water from the background with the Background Eraser Tool. But you might notice one thing that, on the Coral Reef Fish, there is a white patch of color appearing. That is because of the Tolerance setting.
For the Tolerance Setting, we have to continuously change the setting depending upon the complexity of the photograph. Here the setting was 50%, but now I am going to decrease the setting to 25%. After changing the Tolerance Setting, we can see that the image looks flawless now.
Let’s complete this full image with this tool. Quickly and very easily, we can remove the unwanted background of any photograph without damaging the other parts of the picture.
This is the Coolest Thing About the Background Eraser Tool
Giving any special effect or manipulation keeps it transparent so that the Photo manipulation effect will look more realistic. The background eraser tool removes the pixels from an image on the layer convert it into a transparent layer as you start dragging. You can still remove the background while preserving the fine edges of an object in the foreground. By indicating various sampling and tolerance setting, you can still control the specific range of the transparency and sharpness of an image.
A few important points to take into consideration are that we keep the Tolerance setting at 25%. For the Eyedropper tool, three settings are available. Among them, I chose Sampling once because of our background color for the original photograph is white. So in this, we can select that option. But if you are doing any complex photograph which has a lot of elements, then, in that case, you should select Sampling Continuous.
In this photograph, there is a tree and sparrow as well. so we will be keeping the setting for the Eyedropper tool as continuous, which means we have to continuously take samples from areas for the tiny part.
Here, in this image, while removing the background nature, I have put a new layer with a red color that is the reason we see red color in the background. If I remove that layer, you will be able to see only the trees with a transparent background.
Brush Size: It can be adjusted with left or right bracket keys for speeding up the process. It helps us a lot when we are doing the photo manipulation or erasing the strenuous background.
Limits: It is also a very important feature in the Background Eraser Tool setting in Control Bar. Photoshop knows which color/hues you want to remove, and Limits indicate the possibility of pixels that match that color so it can erase them easily.
Limits have Four Different Option:
Contiguous
Discontiguous
Find Edges
Protect Foreground Color
Image is shown below for setting in control bar different Options
Contiguous – This is the default option selected by Photoshop. It will remove the pixels in that area which is substantially touching the pixel under the area.
Discontiguous – This will remove any pixels that are closer to the sampled color, even if these are different by area of a different color.
Find Edges – This option is identical to the contiguous option but more explicit, especially for fine edges.
Protect Foreground Color – It will protect your current foreground color from being erased/removed.
I would like to mention that while using Background Eraser Tool for any removal of a specific background layer, that layer will be permanently removed, and you cannot retrieve it after it has been removed. It is always a good idea to copy your layer to preserve it for the future.
Conclusion Recommended ArticlesThis has been a guide to Background Eraser Tool in Photoshop. Here we discuss how to use Background Eraser Tool in Photoshop. You can also go through our other suggested articles to learn more –
You're reading Background Eraser Tool In Photoshop
Photoshop Crop Tool Tips And Tricks
Learn the essential tips and tricks you can use with the Crop Tool to speed up your workflow when cropping images in Photoshop!
Written by Steve Patterson.
You’ll learn time-saving keyboard shortcuts, a few ways to customize the Crop Tool, and even how to use the Crop Tool to quickly add a border around your image! If you’re new to Photoshop and not sure how to crop images, be sure to check out my previous tutorial where I cover the basics.
I’ll be using Photoshop CC but everything here is fully compatible with Photoshop CS6.
Here’s the image I’ll be using from Adobe Stock:
The original image. Photo credit: Adobe Stock.
Let’s get started!
The Crop Tool keyboard shortcutsLet’s start with the Crop Tool’s keyboard shortcuts.
How to select the Crop ToolTo select the Crop Tool, rather than grabbing it from the Toolbar, just tap the letter C on your keyboard.
Press “C” to select the Crop Tool.
How to lock the aspect ratio of the crop borderAs you’re resizing the crop border, you can lock the aspect ratio by holding down your Shift key as you drag a corner handle.
Shift + drag a corner handle to lock the aspect ratio.
How to resize the crop border from its centerTo resize the border from its center, press and hold the Alt (Win) / Option (Mac) key while dragging a handle.
Alt (Win) / Option (Mac) + drag a handle to resize the border from its center.
How to lock the aspect ratio and resize from centerAnd to both lock the aspect ratio and resize the border from its center, hold Shift+Alt (Win) / Shift+Option (Mac) and drag one of the corners.
Shift + Alt (Win) / Option (Mac) + drag a corner handle to lock the aspect ratio and resize from center.
How to swap the orientation of the crop borderTo swap the orientation of the crop border between portrait and landscape, press the letter X.
Tap “X” to swap the orientation.
Show or hide the cropped areaIf you want to hide the area outside the crop border to get a better sense of what the cropped version will look like, press H.
Press “H” to hide the area outside the crop border.
Then press H again to bring the cropped area back.
Press “H” again to show the cropped area.
How to move the crop border, not the imagePress “P” to toggle Classic Mode on and off.
Temporarily select the Straighten ToolIf you need to straighten your image, you can temporarily access the Straighten Tool by pressing and holding your Ctrl (Win) / Command (Mac) key while the Crop Tool is active.
Hold Ctrl (Win) / Command (Mac) to temporarily access the Straighten Tool.
Drag across something that should be straight, either vertically or horizontally, and then release your mouse button to rotate the image.
Dragging across the horizon line with the Straighten Tool.
Once you’ve straightened the image, release the Ctrl (Win) / Command (Mac) key to switch back to the Crop Tool.
Release Ctrl (Win) / Command (Mac) to return to the Crop Tool.
Cancel the cropTo cancel the crop, press the Esc key on your keyboard.
Cancel the crop to return to the original image.
Cycle through the crop overlaysLet’s look at a couple of tips to use with the crop overlay that appears inside the border. By default, Photoshop displays the Rule of Thirds overlay, which can help with our composition.
The Rule of Thirds overlay appears by default.
You’ll see that there are other overlays we can choose from:
Photoshop includes 6 different crop overlays.
To quickly cycle through them from your keyboard, press the letter O.
Tap “O” to cycle through the crop overlays.
Showing and hiding the crop overlayYou’ll find a couple of other options to choose from. If you choose Auto Show Overlay, then Photoshop will only display the overlay while you’re actually resizing the border, which makes it easier to see your image. And choosing Never Show Overlay prevents the overlay from appearing at all. To switch back to the default mode, choose Always Show Overlay from the list:
The overlay display options.
Crop the imagePress Enter (Win) / Return (Mac) to commit the crop.
Undo the cropAnd if you need to undo the crop, press Ctrl+Z (Win) / Command+Z (Mac).
Press Ctrl+Z (Win) / Command+Z (Mac) to undo the crop.
How to add more canvas space with the Crop ToolFinally, the Crop Tool isn’t just for cropping images. It can also be used to add more canvas space around the image, giving us an easy way to add a border.
If we look in the Layers panel, we see my image sitting on the Background layer:
The Layers panel.
Step 1: Duplicate the Background layerTo keep the border separate from the image, it’s a good idea to duplicate the image first. To do that from your keyboard, press Ctrl+J (Win) / Command+J (Mac). A copy of the image appears above the original:
Press Ctrl+J (Win) / Command+J (Mac) to duplicate the image.
Step 2: Set your background colorPhotoshop will fill the new canvas space with your current Background color, which by default is white:
The Background color swatch in the Toolbar.
Step 3: Select the Crop ToolSelect the Crop Tool, either from the Toolbar or by pressing the letter C:
Press “C” to select the Crop Tool.
Step 4: Turn on “Delete Cropped Pixels”And in the Options Bar, make sure that the Delete Cropped Pixels option is turned on:
Make sure “Delete Cropped Pixels” is checked.
Step 5: Drag the crop handles away from the imageThen drag the handles away from the image to add more canvas space. Hold Alt (Win) / Option (Mac) as you drag to resize the canvas from its center. As you do, you’ll see Photoshop filling the extra space with your Background color:
Drag the crop handles to add more canvas space around the image.
Step 6: Crop the imageTo accept it, press Enter (Win) / Return (Mac):
The Crop Tool makes it easy to add a border around your image.
And there we have it! That’s some tips and tricks you can use when cropping images with the Crop Tool in Photoshop! In the next lesson, I show you how to use Photoshop’s Perspective Crop Tool to both crop images and fix common perspective problems at the same time!
You can jump to any of the other lessons in this Cropping Images in Photoshop series. Or visit our Photoshop Basics section for more topics!
Faking Text Wrap In Photoshop
Faking Text Wrap In Photoshop
Written by Steve Patterson.
In this Photoshop tutorial, we’re going to learn how to create a Photoshop text wrap effect by faking the text wrap feature you’d normally find in a page layout program, allowing us to wrap text around objects. Photoshop may be the world’s most popular and most powerful image editor, but it doesn’t quite measure up with programs like InDesign or even Illustrator when it comes to text (although Photoshop does offer more text-related options than you’d normally expect to find in a program built for photo editing).
Photoshop doesn’t come with an actual text wrap feature, but it does give us the ability to use a path as a container for our text, and as we’ll learn in this tutorial, we can use that to wrap text around objects. It’s not quite as good or as intuitive as having an actual text wrap feature, but it works.
Here I have an image of a baseball lying in the grass:
The original image.
I want to add some text to this image, and I want the text to wrap around the baseball. As I said, Photoshop doesn’t come with an official “text wrap” option, but thanks to paths and Photoshop’s ability to use a path as a container for text, this is going to be easy.
Let’s get started!
Step 1:
Select The Rectangle Tool
Since we’re going to use a path as a container for our text, before we can add our text, we need a path! I’m going to use Photoshop’s Rectangle Tool (not to be confused with the Rectangular Marquee Tool) to create a rectangular path, which will become the basic shape of my text container. I’ll select the Rectangle Tool from the Tools palette:
Select Photoshop’s Rectangle Tool.
I could also press U on my keyboard to quickly select it.
Step 2:
Select The “Paths” Option In The Options Bar
Step 3:
Drag Out A Rectangular-Shaped Path
With my Rectangle Tool selected and set to draw paths, I’m simply going to drag out a rectangular-shaped path, in the same way that I would drag out a selection with the Rectangular Marquee Tool, and this path will become the container for my text:
Drag out a rectangular-shaped path with the Rectangle Tool.
As we can see in the image above, my path is currently running straight through the baseball, which isn’t going to help me much when what I really want is for my text to wrap around the right side of the baseball, not flow over top of it. I need a way to reshape my path so that the path itself wraps around the ball. We’ll do that next.
Step 4:
Select The Ellipse Tool
Select Photoshop’s Ellipse Tool from the Tools palette.
Step 5:
Set The Ellipse Tool To “Subtract” Mode
With this option selected, if I drag out an elliptical-shaped path with the Ellipse Tool, which I’ll do in a moment, any part of the new path that overlaps my original rectangular path will be subtracted from the original path. Let’s see what I mean. I’m going to drag out an elliptical path around the baseball. Before I begin, if I look closely at my cursor, I can see a small minus sign (“-“) in the bottom right corner of it, letting me know that I’m in “Subtract” mode:
A small minus sign (“-“) in the bottom right corner of the cursor indicates that you currently have the “Subtract from path area” option selected.
You can also access the “Subtract” mode simply by holding down your Alt (Win) / Option key before you start dragging out your path, which is a bit faster than selecting the option in the Options Bar (you can release the Alt/Option key right after you begin dragging out your path). I’ll go ahead and drag out a path around the baseball. If I need to reposition my path as I’m dragging, which I almost always need to do, I can hold down my Spacebar and move the path around on the screen with my mouse to reposition it, then release the Spacebar and continue dragging out the path. Here’s the image with the second path around the baseball:
Dragging an elliptical path around the baseball with the Ellipse Tool set to “Subtract” mode.
part of the rectangular path around the baseball. To make it easier to see, I’ve filled in the remaining active path area in the image below. This is the area where my text will appear. Notice how the rectangular path now wraps nicely around the baseball, which means my text is also going to wrap around it:
The filled-in area represents the active path area after subtracting part of it with the Ellipse Tool set to “Subtract”.
Now that we have our path in place, let’s add our text.
Step 6:
Add Your Text
All that’s left to do now is add my text, and for that, I need Photoshop’s Type Tool, so I’ll select it from the Tools palette:
Select the Type Tool.
I could also quickly access the Type Tool by pressing T on my keyboard. Then, with the Type Tool selected, I’ll go up to the Options Bar at the top of the screen and select my font, font size and text color. I’ll just keep things simple here and go with Times New Roman Bold set to a size of 16pt, with my text color set to white:
Selecting the font options in the Options Bar.
The Type Tool icon now shows a dotted elliptical outline which tells me that I’m about to add my text inside the path.
Photoshop uses the active path to contain the text, causing the text to wrap around the baseball on the left.
With my path outlines no longer cluttering up my image, here is my final result:
The final “fake text wrap” result.
Where to go next…
And there we have it! That’s the basics of how to fake a page layout program’s “text wrap” feature in Photoshop! Check out our Text Effects or Photo Effects sections for more Photoshop effects tutorials!
Running Multiple Commands In The Background On Linux
Introduction
Executing multiple commands in the background is a useful feature in Linux that allows users to execute multiple tasks simultaneously. This can be particularly helpful when running long-running commands that may take a while to complete, as it allows the user to continue working on other tasks while the command is being executed in the background.
There are several ways to run commands in the background on Linux, including using the “&” operator and the “nohup” command. In this article, we will explore these methods and provide examples of how to use them.
Running Commands in Background Using “&” OperatorOne of the most straightforward ways to run a command in the background on Linux is to use the “&” operator. This operator is used to run a command in the background and return control of the terminal to the user.
To use the “&” operator, simply append it to the end of the command that you want to run in the background. For example, to run the sleep command in the background, you would enter the following command
$ sleep 45 &This command will execute the sleep command, which will cause the terminal to pause for 45 seconds, and then return control of the terminal to the user. The command will continue running in the background until it is completed.
You can use the jobs command to view a list of background jobs that are currently running on your system. For example −
$ jobs [1]+ Running sleep 60 &You can also use the “fg” command to bring a background job to the foreground and the “bg” command to send a job to the background. For example, to bring the “sleep” command to the foreground, you would enter the following command −
$ fg %1 Running Commands in the Background Using “nohup”Another way to run a command in the background on Linux is to use the nohup command. This command is used to run a command that is immune to hangup signals, which allows the command to continue running even if the terminal is closed or the user logs out.
To use the nohup command, simply enter “nohup” followed by the command that you want to run in the background. For example, to run the sleep command in the background using nohup, you would enter the following command −
$ nohup sleep 60 &This command will execute the sleep command and return control of the terminal to the user. The command will continue running in the background until it is completed, even if the terminal is closed or the user logs out.
This command will execute the “sleep” command and redirect the output to a file called “output.txt” in the current working directory.
Using “nohup” has the added benefit of allowing you to run a command in the background even if you are not logged into the system through a terminal. This can be useful if you want to run a command on a remote server and then disconnect from the server, for example.
ConclusionRunning multiple commands in the background on Linux is a useful feature that allows users to execute multiple tasks simultaneously. There are several ways to run commands in the background on Linux, including using the “&” operator and the “nohup” command. By using these methods, you can continue working on other tasks while long-running commands are being executed in the background.
Remember to use the “jobs” command to view a list of background jobs that are currently running on your system, and use the “fg” and “bg” commands to bring a background job to the foreground or send it to the background, respectively.
Using “nohup” has the added benefit of allowing you to run a command in the background even if you are not logged into the system through a terminal, which can be useful for running commands on remote servers.
Overall, running commands in the background is a valuable tool in Linux that can help increase productivity and efficiency. So, it is a very useful feature for Linux users.
Microsoft Product Support Reports Tool And Microsoft Support Diagnostic Tool
The Microsoft Product Support Reporting Tool facilitates the gathering of critical system and logging information used in troubleshooting support issues. This information helps diagnose problems in the software quicker and provide solutions.
Microsoft Product Support Reports ToolThe Microsoft Product Support Reports utility offers the ability to select the particular scenarios for which system configuration data will be collected: General, Internet and Networking, Business Networks, Server Components, Windows Update Services, Exchange Servers and SQL and other Data Stores (MDAC) .
Depending on the particular system configuration and the categories selected, Microsoft Product Support Reports might take between 7 to 25 minutes or more to complete the data collection. Please read the chúng tôi files for more details about the information collected by each category.
You may install and use an unlimited number of copies of MPSReports solely for the purpose of gathering system information necessary for your support professional to provide you with technical support services requested by you.
Visit Microsoft for details & download.
There are two executables, that correspond to each specific OS architecture, 32 or 64 bit. Please make sure you download the version that corresponds to your system architecture.
Microsoft Diagnostics ServicesMicrosoft Diagnostics Services is an automated troubleshooting service to help you identify solutions to problems with Microsoft software, services, tools and applications like Windows, Office, Visual Studio, Exchange, Internet Explorer, MSN, Server, Microsoft Azure, Security tools, .NET, Hardware including Xbox and Phone devices, Skype and so on. You can visit this link to access the Microsoft Diagnostics Services diagnostic packages.
It first applies targeted analysis to scan your system to identify and resolve specific problem areas. The analysis session will scan your system to identify solutions for specific problem areas.
Once the scans are completed, the results are uploaded to Microsoft servers. They will then be processed and issues if any will be identified and solutions recommended.
Once the troubleshooter completes its scan, the diagnostic results are usually displayed immediately. In some cases, however, especially during deep analytics, the session could take even an hour! You may if you wish, initiate the scan and visit the site later on to see the results. You will be able to view your Analysis Package under the Recent Sessions.
You will also see a message will be displayed that will explain the steps you need to take in order to resolve the issue.
If the suggested solutions do not help you, you could visit this link and ask for online assisted support. You may be charged for services rendered.
Do let us know if you find this self-help portal from Microsoft useful.
Beginners may want to have a look at this post which talks of some basic Windows Troubleshooting Tips. This article touches upon some common steps a Windows user may take in order to try to fix or repair his/her Windows computer.
Note: Microsoft Support Diagnostic Tool (MSDT) will be retired by 2025.
Microsoft Support Diagnostic ToolMicrosoft Support Diagnostic Tool or MSDT is a tool in Windows 10/8/7 and Windows Server, which is used by Microsoft Support to help diagnose Windows problems. When you contact Microsoft Support for any help, the support professional will give you a Passkey. You are required to open the Microsoft Support Diagnostic Tool and enter the Passkey.
To run the Microsoft Support Diagnostic Tool, type msdt in Start Search box and hit Enter. Once you have entered the passkey, the Tool will be activated and you have to only follow the wizard.
You may also be provided with an Incident Number to enter into the tool to identify your information. The tool may require you to download additional diagnostic tools and answer some questions. Once the tool runs its course, it will save the results. You can then send the results to Microsoft.
Microsoft Support uses the information that Microsoft Support Diagnostic Tool (MSDT) collects to analyze and then determine the correct resolution to problems that you are experiencing on the computer. The information may also be used to automatically perform common troubleshooting tasks.
You can also run MSDT if you do not have an internet connection.
This can be done so, through a package that is generated on a computer that has an Internet connection. This package is called Offline package. This Offline package will execute on the destination computer, generate a CAB file with diagnostic information that can then be sent to Microsoft support.
To know more about the Microsoft Support Diagnostic Tool visit KB973559.
Have a look at the Microsoft Support Diagnostic Tool or MSDT in Windows. It is used by Microsoft Support to help diagnose Windows problems.
Saving And Switching Workspaces In Photoshop Cs6
Before we go on, I should note that Photoshop’s workspaces also allow us to save custom keyboard shortcuts and even customized menus for the Menu Bar along the top of the screen. However, the most common use for workspaces is simply to save and switch between panel layouts, and that’s what we’ll be covering in this tutorial.
A workspace is simply Photoshop’s way of knowing which panels to display on the screen and how to arrange them, and we can choose different workspaces depending on the type of task we’re performing. You may want one panel arrangement for photo editing, a different one for digital painting, another one for working with type, and so on, and each panel layout can be saved and chosen as a workspace. In fact, Photoshop includes several built-in workspaces for us to choose from, and in this tutorial, we’ll learn how to switch between these built-in workspaces, how to create our very own custom workspaces, and how to revert back to Photoshop’s default panel layout when needed.
Once we’ve chosen the panels we’ll need for our editing or design task and we’ve taken the time to arrange them in some sort of orderly fashion on the screen, wouldn’t it be great if there was some way to save our custom panel layout so we could quickly choose it again the next time we need it? Thankfully, there is, and we do it by saving our layout as a workspace .
In that tutorial, we learned the difference between panels and panel groups, where to find and access all of Photoshop’s panels, how to move panels from one group to another, how to expand, collapse, minimize and close panels, and more.
In a previous tutorial , we learned how to manage and arrange all of the panels that make up a large part of the interface in Photoshop CS6, like the Layers panel, History, Adjustments, and so on.
Version note: This tutorial is for Photoshop CS6. If you’re using Photoshop CC, please see the updated How To Use Workspaces in Photoshop CC tutorial.
The Default WorkspaceThe panels (highlighted) along the right of the interface.
Let’s take a closer look at the panels that make up the default Essentials workspace. In the main column on the right, we have three panel groups. The first group at the top holds the Color and Swatches panels, the middle group holds the Adjustments and Styles panels, and the bottom group holds three panels – Layers, Channels and Paths. In the secondary column on the left, we have two panels, History on top and Properties below it, both of which are collapsed into just their icon view mode:
The panels that make up the Essentials workspace.
Switching Between WorkspacesEssentials isn’t the only workspace available to us. Photoshop includes other built-in workspaces that we can choose from, and we can select any of them at any time from the workspace selection box in the top right corner of the screen (directly above the main panel column). Here, we can see that by default, the workspace is set to Essentials:
The workspace selection box.
Choosing the Painting workspace from the menu.
Simply by choosing a different workspace, we get a different set of panels on the screen. In this case, the original panel set from the Essentials workspace has been replaced with a set more useful for digital painting. Some of the panels are the same as before, like Layers, Channels, and Paths because they’re still useful for painting, but the Adjustments and Styles panels in the middle group have been replaced with the Brush Presets panel, and the Color panel has been replaced with the Navigator panel in the top group:
The main column now displays a set of panels better suited for painting.
Dragging the second column wider to view the panel names.
Switching from Painting to the Photography workspace.
Once again, Photoshop displays a different set of panels for us (I’ve resized the secondary column so we can see the names of the panels along with their icons). The Photography workspace gives us panels we’ll most likely need for photo editing, including some new ones like the Histogram, Info and Actions panels:
The panels that make up the Photography workspace.
Saving Your Own Custom WorkspaceSwitching back to the Essentials workspace.
This brings back the same default set of panels we saw at the beginning of the tutorial:
Back to the default panels.
Since I covered everything we need to know about selecting and arranging panels and panel groups in the Managing Panels in Photoshop CS6 tutorial, I’ll go ahead and quickly make some changes to my panel layout to customize things more to the way I like to work. Here we can see that I’ve closed the panels I don’t use very often (like Color, Swatches and Styles) and instead I’ve placed the Histogram panel at the top of the main column. I’ve grouped the History and Actions panels in with the Layers panel (since all three panels tend to take up a lot of space) and I’ve moved the Channels and Paths panels, as well as the Adjustments panel, over to the secondary column. I’ve also opened a few additional panels from under the Window menu in the Menu Bar along the top of the screen and placed them in the secondary column as well. Finally, I’ve resized the secondary column so I can see the panel names with the icons:
My custom panel layout.
Choosing New Workspace from the list.
Photoshop will open the New Workspace dialog box for us so we can give our new workspace a name. I’ll name mine something highly creative, like “Steve’s Workspace”, but unless your name also happens to be Steve, you may want to choose something different. At the bottom of the dialog box are options for including custom keyboard shortcuts and menus with our workspace, but I’m going to leave those blank:
Give your new workspace a name.
Any new custom workspace you save is added to the list.
Resetting A WorkspaceWhenever we make changes to an existing workspace, Photoshop remembers those changes the next time we select the workspace, and this can actually cause a bit of confusion if you’re not aware of it. To show you what I mean, a moment ago, I created my own panel layout to save as a custom workspace, but if you remember, I was actually in the default Essentials workspace as I was opening, closing and moving panels around. Now that I’ve saved my new panel arrangement as a custom workspace, let’s see what happens if I switch back to the default Essentials workspace:
The Essentials workspace no longer shows the default panels.
Hmm, what’s going on here? It says that I have the Essentials workspace selected, but I’m still seeing the same custom panel layout I created for my new workspace. That’s because Photoshop remembered all the changes I made while I was still in the Essentials workspace and it keeps these changes until I reset the workspace myself.
Choosing “Reset Essentials” from the menu.
And now things are back to the way we expected. The original panel layout has returned:
The panels after resetting the Essentials workspace.
Update the detailed information about Background Eraser Tool In Photoshop on the Hatcungthantuong.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!