Trending February 2024 # Beanstalk Brings Android 4.4.2 Kitkat Update For T # Suggested March 2024 # Top 11 Popular

You are reading the article Beanstalk Brings Android 4.4.2 Kitkat Update For T updated in February 2024 on the website Hatcungthantuong.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested March 2024 Beanstalk Brings Android 4.4.2 Kitkat Update For T

Let’s see how to install the Android 4.4 KitKat Beanstalk ROM on your T-Mobile LG G2.

WARNING!

Warranty may be void of your device if you follow the procedures given on this page.

You only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components.

CHECK DEVICE MODEL NO.

To make sure your device is eligible with this, you must first confirm its model no. in ‘About device’ option under Settings. Another way to confirm model no. is by looking for it on the packaging box of your device. It must be D801!

Do not use the procedures discussed here on any other LG G2 variant or any other device of LG or any other company. You have been warned!

BEFORE YOU BEGIN..

You must do this pre-installation stuff before attempting to install the ROM on your T-Mobile G2 in order to avoid any complications later, and have a smooth and successful process.

GET CWM /TWRP RECOVERY FOR YOUR T-MOBILE LG G2

You will need either of CWM or TWRP recovery for your T-Mobile LG G2 installed on your device, to be able to install the Android 4.4 KitKat ROM on your device.

If you don’t have any, we suggest you search for any one of them and install it first before proceeding any further. Google is your friend!

BACK UP YOUR DEVICE

Back up important data and stuff before you start playing around here as there are chances you might lose your apps and app-data (app settings, game progress, etc.), and in rare case, files on the internal memory, too.

For help on Backup and Restore, check out our exclusive page on that linked right below.

► ANDROID BACK UP AND RESTORE GUIDE: APPS AND TIPS

CHARGE YOUR DEVICE

If your android device powers off due to lack of battery while the process is underway, it could damage the device.

So, make sure your device is adequately charged — at least 50% battery of the device.

EXAMPLE VIDEO

If you haven’t used a custom recovery, either CWM or TWRP, before, to install a .zip file of a ROM on anything else, then we suggest you first watch a video of that, given right below, to get familiar with the process.

DOWNLOADS

Download the files given below and transfer them to a separate folder on your phone and remember the location.

GAPPS FILE ROM FILE FOR T-Mobile LG G2, D801

For latest version of the ROM, check the original page →.

Reminder: Before you proceed, make sure you’ve transferred the files you downloaded above to a separate folder on your T-Mobile LG G2.

STEP-BY-STEP GUIDE

Make sure you have backed up your phone adequately (including important data stored on internal memory).

NOTE:

Older versions of both CWM and TWRP recovery are not working with Android 4.4 based ROMs, throwing installation errors and WiFi bugs, which is why you need to use the latest version of either recovery. We believe, TWRP v2.6.3.0 and above, and CWM v6.0.4.3 and above, are working fine with Android 4.4 ROMs.

GUIDE FOR CWM RECOVERY USERS

Boot your T-Mobile LG G2 into recovery mode. For this:

Power off your device and wait for 5-10 seconds until the device is fully switched off.

Press and hold Volume Down and Power buttons together until you see LG Logo, upon which, release them both for a second and then then press them both buttons again together until you Factory Hard Reset screen.

└ In Recovery mode, use Volume buttons to navigate Up and Down between options and use Power button to select an option.

Create a Nandroid Backup from recovery. It’s optional but very important to do, so that in case something goes wrong you can restore to current status easily. For making a Nandroid Backup, go to Backup And Restore »Backup.

Perform a Factory Reset (This will delete all apps and their settings and game progress). For this:

Select Wipe data/Factory reset, then select Yes on the next screen to confirm factory reset (screenshot)

First Install the ROM File:

└ Make sure to first flash the ROM file and then the Gapps file.

Reboot your device. For this, go back to the main menu of recovery and select reboot system now.

That’s all. Your phone will now reboot and it will take some time as it’ll be phone’s first boot after installing Android 4.4, be extremely excited for this!

Note: In case your device gets bootloop (stuck at logo while rebooting), just do a factory reset (step 3) and you will be fine.

GUIDE FOR TWRP RECOVERY USERS

Boot into recovery mode. For this:

Power off your device and wait for 5-10 seconds until the device is fully switched off.

Press and hold Volume Down and Power buttons together until you see LG Logo, upon which, release them both for a second and then then press them both buttons again together until you Factory Hard Reset screen.

└ In Recovery mode, use Volume buttons to navigate Up and Down between options and use Power button to select an option.

Perform a Factory Reset (this will delete all apps and their settings and game progress). For this:

Tap on Wipe » then at the bottom of the screen do a Swipe on the ‘Swipe to factory reset‘ option (screenshot)

First Install the ROM file:

└ Make sure to first flash the ROM file and then the Gapps file.

Reboot your device. Go back to the main menu of recovery and tap on Reboot » then, tap on System to reboot your phone.

That’s all. Your phone will now reboot and it will take some time as it’ll be phone’s first boot after installing Android 4.4, be extremely excited for this!

Note: In case your device gets bootloop (stuck at logo while rebooting), just do a factory reset (step 3) and you will be fine. ALSO, CWM recovery is preferred in place of TWRP to flash Android 4.4 ROMs.

FEEDBACK US!

It was easy to install Android 4.4 KitKat on your T-Mobile LG G2, right? Let us know how is it to your taste?

Your suggestions and queries, if any, are most welcomed!

You're reading Beanstalk Brings Android 4.4.2 Kitkat Update For T

Beanstalk Brings Android 4.4.2 Kitkat Update For Verizon Lg G2 Users

Let’s see how to install the Android 4.4 KitKat Beanstalk ROM on your Verizon LG G2.

WARNING!

Warranty may be void of your device if you follow the procedures given on this page.

You only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components.

CHECK DEVICE MODEL NO.

To make sure your device is eligible with this, you must first confirm its model no. in ‘About device’ option under Settings. Another way to confirm model no. is by looking for it on the packaging box of your device. It must be VS980!

Do not use the procedures discussed here on any other LG G2 variant or any other device of LG or any other company. You have been warned!

BEFORE YOU BEGIN..

You must do this pre-installation stuff before attempting to install the ROM on your Verizon G2 in order to avoid any complications later, and have a smooth and successful process.

GET CWM /TWRP RECOVERY FOR YOUR VERIZON LG G2

You will need either of CWM or TWRP recovery for your Verizon LG G2 installed on your device, to be able to install the Android 4.4 KitKat ROM on your device.

If you don’t have it, then first search for that and install that. (Google is your friend!)

BACK UP YOUR DEVICE

Back up important data and stuff before you start playing around here as there are chances you might lose your apps and app-data (app settings, game progress, etc.), and in rare case, files on the internal memory, too.

For help on Backup and Restore, check out our exclusive page on that linked right below.

► ANDROID BACK UP AND RESTORE GUIDE: APPS AND TIPS

CHARGE YOUR DEVICE

If your android device powers off due to lack of battery while the process is underway, it could damage the device.

So, make sure your device is adequately charged — at least 50% battery of the device.

EXAMPLE VIDEO

If you haven’t used a custom recovery, either CWM or TWRP, before, to install a .zip file of a ROM on anything else, then we suggest you first watch a video of that, given right below, to get familiar with the process.

DOWNLOADS

Download the files given below and transfer them to a separate folder on your phone and remember the location.

GAPPS FILE ROM FILE FOR VERIZON LG G2, VS980

For latest version of the ROM, check the original page →.

Reminder: Before you proceed, make sure you’ve transferred the files you downloaded above to a separate folder on your Verizon LG G2.

STEP-BY-STEP GUIDE

Make sure you have backed up your phone adequately (including important data stored on internal memory).

NOTE:

Older versions of both CWM and TWRP recovery are not working with Android 4.4 based ROMs, throwing installation errors and WiFi bugs, which is why you need to use the latest version of either recovery. We believe, TWRP v2.6.3.0 and above, and CWM v6.0.4.3 and above, are working fine with Android 4.4 ROMs.

GUIDE FOR CWM RECOVERY USERS

Boot your Verizon LG G2 into recovery mode. For this:

Power off your device and wait for 5-10 seconds until the device is fully switched off.

Press and hold Volume Down and Power buttons together until you see LG Logo, upon which, release them both for a second and then then press them both buttons again together until you Factory Hard Reset screen.

└ In Recovery mode, use Volume buttons to navigate Up and Down between options and use Power button to select an option.

Create a Nandroid Backup from recovery. It’s optional but very important to do, so that in case something goes wrong you can restore to current status easily. For making a Nandroid Backup, go to Backup And Restore »Backup.

Perform a Factory Reset (This will delete all apps and their settings and game progress). For this:

Select Wipe data/Factory reset, then select Yes on the next screen to confirm factory reset (screenshot)

First Install the ROM File:

└ Make sure to first flash the ROM file and then the Gapps file.

Reboot your device. For this, go back to the main menu of recovery and select reboot system now.

That’s all. Your phone will now reboot and it will take some time as it’ll be phone’s first boot after installing Android 4.4, be extremely excited for this!

Note: In case your device gets bootloop (stuck at logo while rebooting), just do a factory reset (step 3) and you will be fine.

GUIDE FOR TWRP RECOVERY USERS

Boot into recovery mode. For this:

Power off your device and wait for 5-10 seconds until the device is fully switched off.

Press and hold Volume Down and Power buttons together until you see LG Logo, upon which, release them both for a second and then then press them both buttons again together until you Factory Hard Reset screen.

└ In Recovery mode, use Volume buttons to navigate Up and Down between options and use Power button to select an option.

Perform a Factory Reset (this will delete all apps and their settings and game progress). For this:

Tap on Wipe » then at the bottom of the screen do a Swipe on the ‘Swipe to factory reset‘ option (screenshot)

First Install the ROM file:

└ Make sure to first flash the ROM file and then the Gapps file.

Reboot your device. Go back to the main menu of recovery and tap on Reboot » then, tap on System to reboot your phone.

That’s all. Your phone will now reboot and it will take some time as it’ll be phone’s first boot after installing Android 4.4, be extremely excited for this!

Note: In case your device gets bootloop (stuck at logo while rebooting), just do a factory reset (step 3) and you will be fine. ALSO, CWM recovery is preferred in place of TWRP to flash Android 4.4 ROMs.

FEEDBACK US!

It was easy to install Android 4.4 KitKat on your Verizon LG G2, right? Let us know how is it to your taste?

Your suggestions and queries, if any, are most welcomed!

Download/Install Android 4.4.2 Kitkat Update For T

Contents show

WARNING!

T-MOBILE GALAXY NOTE 3 OFFICIAL KITKAT 4.4 FIRMWARE

STEP 0: CHECK DEVICE MODEL NO.

STEP 1: BACKUP YOUR DEVICE

STEP 2: INSTALL LATEST DRIVER

STEP 3: INSTALLATION INSTRUCTIONS

STOCK FIRMWARE INFO

Firmware Version N900TUVUCNB4

Android Version Android 4.4.2, KitKat

Is this Official? Yes! This is the official update by Samsung.

Release Date March 2013

Credits SamMobile

Here’s the official T-Mobile Galaxy Note 3 Android 4.4 KitKat update, directly from Samsung, that you CAN INSTALL MANUALLY yourself!

The Android 4.4 firmware name is, N900TUVUCNB4, and has been released officially today only.

You can install the KitKat update yourself using Odin software, that we have provided below with direct download links of firmware too.

So, Update T-Moble Galaxy Note 3 model n0. SM-N900T to latest Android 4.4.2 OS, KitKat now.

  WARNING!

Warranty may be void of your device if you follow the procedures given on this page.

You only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components.

  T-MOBILE GALAXY NOTE 3 OFFICIAL KITKAT 4.4 FIRMWARE

Before you begin with guide instructions below, make sure your android device is adequately charged — at least 50% battery of the device.

  STEP 0: CHECK DEVICE MODEL NO.

To make sure your device is eligible with this, you must first confirm its model no. in ‘About device’ option under Settings. Another way to confirm model no. is by looking for it on the packaging box of your device. It must be SM-N900T!

Do not use the procedures discussed here on any other Galaxy Note 3 (including the Galaxy Note 3 variant at Sprint, US-Cellular, AT&T, Verizon and other International variants) or any other device of Samsung or any other company. You have been warned!

  STEP 1: BACKUP YOUR DEVICE

Back up important data and stuff before you start playing around here as there are chances you might lose your apps and app-data (app settings, game progress, etc.), and in rare case, files on the internal memory, too.

For help on Backup and Restore, check out our exclusive page on that linked right below.

► ANDROID BACK UP AND RESTORE GUIDE: APPS AND TIPS

  STEP 2: INSTALL LATEST DRIVER

You must have proper and working driver installed on your windows computer to be able to successfully flash stock firmware on your T-Mobile Galaxy Note 3.

In case you’re not sure, follow the link below for a definitive guide for installing driver for your Galaxy Note 3 on your computer.

► SAMSUNG GALAXY NOTE 3 DRIVERS INSTALLATION GUIDE

   STEP 3: INSTALLATION INSTRUCTIONS   DOWNLOADS

Download the Odin zip file and firmware file given below. Transfer both Odin and firmware file to a separate folder on your computer just to keep things tidy.

  ODIN ZIP FILE   FIRMWARE ZIP FILE   STEP-BY-STEP GUIDE

Important Note: Backup important files stored on internal SD card of your device, so that in case a situation arises requiring you to do a factory reset after flashing stock firmware, which might delete internal sd card too, your files will remain safe on PC.

Extract/Unzip the Odin zip file, Latest Odin3 v3.09.zip on your computer (using 7-zip free software, preferably) to get this file: Odin3 v3.09.exe

Extract/Unzip the Firmware zip file, N900TUVUCNB4_N900TTMBCNB4_TMB.zip on your computer (using 7-zip free software, preferably) to get this file: N900TUVUCNB4_N900TTMBCNB4_N900TUVUCNB4_HOME.tar.md5

Move the firmware file, N900TUVUCNB4_N900TTMBCNB4_N900TUVUCNB4_HOME.tar.md5, in the same folder in which you extracted Latest Odin3 v3.09.zip (Just for your convenience, that is). So, now you’ll have the following files in that folder:

Odin3 v3.09.exe

N900TUVUCNB4_N900TTMBCNB4_N900TUVUCNB4_HOME.tar.md5

Disconnect the Galaxy Note 3 from PC if it is connected.

Boot your T-Mobile Galaxy Note 3 into Download Mode:

Power off your phone first and wait for 6-7 seconds after display is off.

Press and hold these 3 buttons together until you see Warning! screen: Volume Down + Power + Home.

If you don’t get the Added! message, here are some troubleshooting tips:

Make sure you have installed driver for Galaxy Note 3 as said above in ‘Before you begin..’ section.

If you have already installed driver, then uninstall them and re-install back.

Connect using a different USB port on your PC.

Try a different USB cable. The original cable that came with your phone should work best, if not, try any other cable that’s new and of good quality.

Reboot phone and PC and then try again.

Load the firmware file (extracted in Step 1) into Odin as instructed below:

Now in the Option section of Odin, make sure that Re-Partition box is unchecked. (Auto Reboot and F. Reset Time boxes remain checked, while all other boxes remain unchecked.)

Double check the above two steps.

If you see FAIL message instead of the PASS in Odin’s top left box, that’s a problem. Try this now: disconnect your T-Mobile Galaxy Note 3 from PC, close Odin, remove phone’s battery and put it back inside in 3-4 seconds, open Odin and then repeat from Step 3 of this guide again.

Also, If device is Stuck at setup connection or on any other process, then too, try this: disconnect your T-Mobile Galaxy Note 3 from PC, close Odin, remove phone’s battery and put it back inside in 3-4 seconds, open Odin and then repeat from Step 3 of this guide again.

FEEDBACK US!

Your suggestions and queries, if any, are most welcomed!

Leaked Android 4.4.2 Kitkat Firmware For At&T Galaxy Note 3 Sm

Contents show

WARNING!

AT&T GALAXY NOTE 3 SM-N900A OFFICIAL KitKat 4.4.2 FIRMWARE

STEP 0: CHECK DEVICE MODEL NO.

STEP 1: BACKUP YOUR DEVICE

STEP 2: INSTALL LATEST DRIVER

STEP 3: INSTALLATION INSTRUCTIONS

LEAKED FIRMWARE INFO

Firmware Version N900AUCUCMLG

Android Version Android KitKat 4.4.2

Is this Official? NO! This is a leaked firmware, not yet released by Samsung.

Stability Good Enough for Daily Use.

Credits designgears

  WARNING!

This leaked test firmware contains a new bootloader due to which downgrading to previous stock firmwares WILL NOT BE POSSIBLE.

As of yet, root CAN NOT be retained or acquired in this leaked firmware.

Warranty may be void of your device if you follow the procedures given on this page.

You only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components.

  AT&T GALAXY NOTE 3 SM-N900A OFFICIAL KitKat 4.4.2 FIRMWARE

Before you begin with guide instructions below, make sure your android device is adequately charged — at least 50% battery of the device.

  STEP 0: CHECK DEVICE MODEL NO.

To make sure your device is eligible with this, you must first confirm its model no. in ‘About device’ option under Settings. Another way to confirm model no. is by looking for it on the packaging box of your device. It must be SM-N900A!

Do not use the procedures discussed here on any other Galaxy Note 3 (including the Galaxy Note 3 variant at Sprint, Verizon, T-Mobile and other International variants) or any other device of Samsung or any other company. You have been warned!

  STEP 1: BACKUP YOUR DEVICE

Back up important data and stuff before you start playing around here as there are chances you might lose your apps and app-data (app settings, game progress, etc.), and in rare case, files on the internal memory, too.

For help on Backup and Restore, check out our exclusive page on that linked right below.

► ANDROID BACK UP AND RESTORE GUIDE: APPS AND TIPS

  STEP 2: INSTALL LATEST DRIVER

You must have proper and working driver installed on your windows computer to be able to successfully flash this firmware on your AT&T Galaxy Note 3. In case you’re not sure, follow the link below for a definitive guide for installing driver for your Galaxy Note 3 on your computer.

► SAMSUNG GALAXY NOTE 3 DRIVERS INSTALLATION GUIDE

   STEP 3: INSTALLATION INSTRUCTIONS   DOWNLOADS

Download the firmware file given below.

  FIRMWARE ZIP FILE   STEP-BY-STEP GUIDE

Important Note: Backup important files stored on internal SD card of your device, so that in case a situation arises requiring you to do a factory reset after flashing the leaked firmware, which might delete internal sd card too, your files will remain safe on PC.

Disconnect the Galaxy Note 3 from PC if it is connected.

Boot your AT&T Galaxy Note 3 into Download Mode:

Power off your phone first and wait for 6-7 seconds after display is off

Press and hold these 3 buttons together until you see Warning! screen: Volume Down + Power + Home

If you don’t get the Added! message, here are some troubleshooting tips:

Make sure you have installed driver for Galaxy Note 3 as said above.

If you have already installed driver, then uninstall them and re-install back.

Connect using a different USB port on your PC.

Try a different USB cable. The original cable that came with your phone should work best, if not, try any other cable that’s new and of good quality.

Reboot phone and PC and then try again

If you see FAIL message instead of the PASS in Odin’s top left box, that’s a problem. Try this now: disconnect your Galaxy Note 3 from PC, close Odin, remove phone’s battery and put it back inside in 3-4 seconds and then repeat from Step 3 of this guide again.

Also, If device is Stuck at setup connection or on any other process, then too, try this: disconnect your Note 3 from PC, close Odin, remove phone’s battery and put it back inside in 3-4 seconds then repeat from Step 3 of this guide again.

FEEDBACK US!

Your suggestions and queries, if any, are most welcomed!

And.. Galaxy Ace Gets Android 4.4.2 Kitkat Update From Unofficial Cyanogenmod 11 Rom!

Known Bugs/Issues

[As of December 29, 2013]

Video Recorder Force Closes.

FM Radio.

  WARNING!

Warranty may be void of your device if you follow the procedures given on this page.

You only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components.

Before you begin with guide instructions below, make sure your android device is adequately charged — at least 50% battery of the device.

  STEP 0: CHECK DEVICE MODEL NO.

Do not use the procedures discussed here on any other variants of Galaxy Ace lncluding GT-S5830C, GT-S5830I, GT-S5830M or on any other devices of Samsung or any other company. You have been warned!

  STEP 1: BACKUP YOUR DEVICE

Back up important data and stuff before you start playing around here as there are chances you might lose your apps and app-data (app settings, game progress, etc.), and in rare case, files on the internal memory, too.

For help on Backup and Restore, check out our exclusive page on that linked right below.

► ANDROID BACK UP AND RESTORE GUIDE: APPS AND TIPS

  STEP 2: INSTALL THE LATEST CWM/TWRP RECOVERY

 Skip this step if you you already have latest version of CWM or TWRP recovery installed on your device.

Make sure that you’ve latest version of the recovery of your choice installed on your device.

Older versions of both CWM and TWRP recoveries are not working with Android 4.4 based ROMs, throwing installation errors and WiFi bugs, therefore you need to use the latest version of either recovery.

   STEP 3: INSTALLATION INSTRUCTIONS

  DOWNLOADS

Download the file given below and transfer it to a separate folder on your phone and remember the location.

  ROM FILE

For latest version of the ROM, check the original page →

Be sure to transfer the ROM file you downloaded above to your phone and remember the location of the files. You will need to flash them now on your device using either of ClockworkMod (CWM) or TWRP recovery.

We’ve got separate guide for CWM and TWRP recovery, so use the guide relevant to the recovery you have installed on your device.

  GUIDE FOR CWM RECOVERY USERS

Boot into recovery mode. If you’re rooted, the easiest way to boot into recovery mode would be using the QuickBoot app. If not rooted, then follow the instructions below:

Power off your device and wait for 5-10 seconds until the device is fully switched off.

(For further help, Check out our exclusive page on Samsung Galaxy Ace Recovery Mode).

Create a Nandroid Backup from recovery. It’s optional but very important to do, so that in case something goes wrong you can restore to current status easily. For making a Nandroid Backup, go to Backup And Restore » Backup.

Now perform a Factory Reset (This will delete all apps and their settings and game progress). For this:

Select Wipe data/Factory reset, then select Yes on the next screen to confirm factory reset (screenshot).

First Install the ROM file:

Reboot your device. For this, go back to the main menu of recovery and select reboot system now.

That’s all. Your phone will now reboot and it will take some time as it’ll be phone’s first boot after installing Android 4.4, be extremely excited for this!

 Note: In case your device gets bootloop (stuck at logo while rebooting), just do a factory reset (step 3) and you will be fine.

GUIDE FOR TWRP RECOVERY USERS

Boot into recovery mode. If you’re rooted, the easiest way to boot into recovery mode would be using the QuickBoot app. If not rooted, then follow the instructions below:

Power off your device and wait for 5-10 seconds until the device is fully switched off.

(For further help, Check out our exclusive page on Samsung Galaxy Ace Recovery Mode).

Perform a Factory Reset (this will delete all apps and their settings and game progress). For this:

Tap on Wipe » then at the bottom of the screen do a Swipe on the ‘Swipe to factory reset‘ option (screenshot).

First Install the ROM file:

Reboot your device. Go back to the main menu of recovery and tap on Reboot » then, tap on System to reboot your phone.

That’s all. Your phone will now reboot and it will take some time as it’ll be phone’s first boot after installing Android 4.4, be extremely excited for this!

 Note: In case your device gets bootloop (stuck at logo while rebooting), just do a factory reset (step 3) and you will be fine.

FEEDBACK US!

Your suggestions and queries, if any, are most welcomed!

Cyprus Galaxy Note 10.1 Gets Kitkat 4.4.2 Update: N8000Xxudnh2

  WARNING!

Warranty may be void of your device if you follow the procedures given on this page.

You only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components.

  CYPRUS GALAXY NOTE 10.1 GT-N8000 KITKAT 4.4.2 FIRMWARE: N8000XXUDNH2

Before you begin with guide instructions below, make sure your android device is adequately charged — at least 50% battery of the device.

  STEP 0: CHECK DEVICE MODEL NO.

To make sure your device is eligible with this, you must first confirm its model no. in ‘About device’ option under Settings. Another way to confirm model no. is by looking for it on the packaging box of your device. It must be GT-N8000!

Do NOT use the procedures discussed here on any Galaxy model (including the Galaxy NOTE tablets) or any other device of Samsung or any other company. You have been warned!

  STEP 1: BACKUP YOUR DEVICE

Back up important data and stuff before you start playing around here as there are chances you might lose your apps and app-data (app settings, game progress, etc.), and in rare case, files on the internal memory, too.

For help on Backup and Restore, check out our exclusive page on that linked right below.

► ANDROID BACK UP AND RESTORE GUIDE: APPS AND TIPS

  STEP 2: INSTALL LATEST DRIVER

You must have proper and working driver installed on your windows computer to be able to successfully flash stock firmware on your Galaxy NOTE 10.1. In case you’re not sure, follow the link below for a definitive guide for installing driver for your NOTE 10.1 on your computer.

► SAMSUNG GALAXY NOTE 10.1 DRIVERS INSTALLATION GUIDE

   STEP 3: INSTALLATION INSTRUCTIONS   DOWNLOADS

Download the Odin zip file and firmware file given below. Transfer both Odin and firmware file to a separate folder on your computer just to keep things tidy.

  ODIN ZIP FILE   FIRMWARE ZIP FILE   STEP-BY-STEP GUIDE

Important Note: Backup important files stored on internal SD card of your device, so that in case a situation arises requiring you to do a factory reset after flashing stock firmware, which might format internal sd card too, your files will remain safe on PC.

Extract/Unzip the Odin zip file, Latest Odin3 v3.09.zip on your computer (using 7-zip free software, preferably) to get this file: Odin3 v3.09.exe

Extract/Unzip the Firmware zip file, N8000XXUDNH2_N8000VFGDNH2_CYV.zip on your computer (using 7-zip free software, preferably) to get this file: N8000XXUDNH2 _N8000OXADNE4_N8000XXUDNE1.tar.md5

Move the extracted file, N8000XXUDNH2 _N8000VFGDNH2_N8000BUDNG1.tar.md5, in the same folder in which you extracted Latest Odin3 v3.09.zip (Just for your convenience, that is). So, now you’ll have the following files in that folder:

Odin3 v3.09.exe

N8000XXUDNH2 _N8000VFGDNH2_N8000BUDNG1.tar.md5

Disconnect the Galaxy NOTE 10.1  from PC if it is connected.

Boot your Galaxy NOTE 10.1  into Download Mode (the image below of S2 would help you):

Power off your phone first and wait for 6-7 seconds after display is off

Press and hold these 3 buttons together until you see Warning! screen: Volume Down + Power + Home

If you don’t get the Added! message, here are some troubleshooting tips:

Make sure you have installed driver for Galaxy NOTE 10.1  as said above.

If you have already installed driver, then uninstall them and re-install back.

Connect using a different USB port on your PC.

Try a different USB cable. The original cable that came with your phone should work best, if not, try any other cable that’s new and of good quality.

Reboot phone and PC and then try again.

Load the firmware file (extracted in Step 2) into Odin as instructed below:

Now in the Option section of Odin, make sure that Re-Partition box is unchecked. (Auto Reboot and F. Reset Time boxes remain checked, while all other boxes remain unchecked.)

Double check the above two steps.

If you see FAIL message instead of the PASS in Odin’s top left box, that’s a problem. Try this now: disconnect your Galaxy NOTE 10.1  from PC, close Odin, remove phone’s battery and put it back inside in 3-4 seconds, open Odin and then repeat from Step 6 of this guide again.

Also, If device is Stuck at setup connection or on any other process, then too, try this: disconnect your NOTE 10.1  from PC, close Odin, remove phone’s battery and put it back inside in 3-4 seconds, open Odin and then repeat from Step 6 of this guide again.

FEEDBACK US!

Your suggestions and queries, if any, are most welcomed!

Update the detailed information about Beanstalk Brings Android 4.4.2 Kitkat Update For T on the Hatcungthantuong.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!