You are reading the article Cyprus Galaxy Note 10.1 Gets Kitkat 4.4.2 Update: N8000Xxudnh2 updated in November 2023 on the website Hatcungthantuong.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested December 2023 Cyprus Galaxy Note 10.1 Gets Kitkat 4.4.2 Update: N8000Xxudnh2
WARNING!
Warranty may be void of your device if you follow the procedures given on this page.
You only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components.
CYPRUS GALAXY NOTE 10.1 GT-N8000 KITKAT 4.4.2 FIRMWARE: N8000XXUDNH2Before you begin with guide instructions below, make sure your android device is adequately charged — at least 50% battery of the device.
STEP 0: CHECK DEVICE MODEL NO.To make sure your device is eligible with this, you must first confirm its model no. in ‘About device’ option under Settings. Another way to confirm model no. is by looking for it on the packaging box of your device. It must be GT-N8000!
Do NOT use the procedures discussed here on any Galaxy model (including the Galaxy NOTE tablets) or any other device of Samsung or any other company. You have been warned!
STEP 1: BACKUP YOUR DEVICEBack up important data and stuff before you start playing around here as there are chances you might lose your apps and app-data (app settings, game progress, etc.), and in rare case, files on the internal memory, too.
For help on Backup and Restore, check out our exclusive page on that linked right below.
► ANDROID BACK UP AND RESTORE GUIDE: APPS AND TIPS
STEP 2: INSTALL LATEST DRIVERYou must have proper and working driver installed on your windows computer to be able to successfully flash stock firmware on your Galaxy NOTE 10.1. In case you’re not sure, follow the link below for a definitive guide for installing driver for your NOTE 10.1 on your computer.
► SAMSUNG GALAXY NOTE 10.1 DRIVERS INSTALLATION GUIDE
STEP 3: INSTALLATION INSTRUCTIONS DOWNLOADSDownload the Odin zip file and firmware file given below. Transfer both Odin and firmware file to a separate folder on your computer just to keep things tidy.
ODIN ZIP FILE FIRMWARE ZIP FILE STEP-BY-STEP GUIDEImportant Note: Backup important files stored on internal SD card of your device, so that in case a situation arises requiring you to do a factory reset after flashing stock firmware, which might format internal sd card too, your files will remain safe on PC.
Extract/Unzip the Odin zip file, Latest Odin3 v3.09.zip on your computer (using 7-zip free software, preferably) to get this file: Odin3 v3.09.exe
Extract/Unzip the Firmware zip file, N8000XXUDNH2_N8000VFGDNH2_CYV.zip on your computer (using 7-zip free software, preferably) to get this file: N8000XXUDNH2 _N8000OXADNE4_N8000XXUDNE1.tar.md5
Move the extracted file, N8000XXUDNH2 _N8000VFGDNH2_N8000BUDNG1.tar.md5, in the same folder in which you extracted Latest Odin3 v3.09.zip (Just for your convenience, that is). So, now you’ll have the following files in that folder:
Odin3 v3.09.exe
N8000XXUDNH2 _N8000VFGDNH2_N8000BUDNG1.tar.md5
Disconnect the Galaxy NOTE 10.1 from PC if it is connected.
Boot your Galaxy NOTE 10.1 into Download Mode (the image below of S2 would help you):
Power off your phone first and wait for 6-7 seconds after display is off
Press and hold these 3 buttons together until you see Warning! screen: Volume Down + Power + Home
If you don’t get the Added! message, here are some troubleshooting tips:
Make sure you have installed driver for Galaxy NOTE 10.1 as said above.
If you have already installed driver, then uninstall them and re-install back.
Connect using a different USB port on your PC.
Try a different USB cable. The original cable that came with your phone should work best, if not, try any other cable that’s new and of good quality.
Reboot phone and PC and then try again.
Load the firmware file (extracted in Step 2) into Odin as instructed below:
Now in the Option section of Odin, make sure that Re-Partition box is unchecked. (Auto Reboot and F. Reset Time boxes remain checked, while all other boxes remain unchecked.)
Double check the above two steps.
If you see FAIL message instead of the PASS in Odin’s top left box, that’s a problem. Try this now: disconnect your Galaxy NOTE 10.1 from PC, close Odin, remove phone’s battery and put it back inside in 3-4 seconds, open Odin and then repeat from Step 6 of this guide again.
Also, If device is Stuck at setup connection or on any other process, then too, try this: disconnect your NOTE 10.1 from PC, close Odin, remove phone’s battery and put it back inside in 3-4 seconds, open Odin and then repeat from Step 6 of this guide again.
FEEDBACK US!Your suggestions and queries, if any, are most welcomed!
You're reading Cyprus Galaxy Note 10.1 Gets Kitkat 4.4.2 Update: N8000Xxudnh2
And.. Galaxy Ace Gets Android 4.4.2 Kitkat Update From Unofficial Cyanogenmod 11 Rom!
Known Bugs/Issues
[As of December 29, 2013]
Video Recorder Force Closes.
FM Radio.
WARNING!
Warranty may be void of your device if you follow the procedures given on this page.
You only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components.
Before you begin with guide instructions below, make sure your android device is adequately charged — at least 50% battery of the device.
STEP 0: CHECK DEVICE MODEL NO.
Do not use the procedures discussed here on any other variants of Galaxy Ace lncluding GT-S5830C, GT-S5830I, GT-S5830M or on any other devices of Samsung or any other company. You have been warned!
STEP 1: BACKUP YOUR DEVICE
Back up important data and stuff before you start playing around here as there are chances you might lose your apps and app-data (app settings, game progress, etc.), and in rare case, files on the internal memory, too.
For help on Backup and Restore, check out our exclusive page on that linked right below.
► ANDROID BACK UP AND RESTORE GUIDE: APPS AND TIPS
STEP 2: INSTALL THE LATEST CWM/TWRP RECOVERY
Skip this step if you you already have latest version of CWM or TWRP recovery installed on your device.
Make sure that you’ve latest version of the recovery of your choice installed on your device.
Older versions of both CWM and TWRP recoveries are not working with Android 4.4 based ROMs, throwing installation errors and WiFi bugs, therefore you need to use the latest version of either recovery.
STEP 3: INSTALLATION INSTRUCTIONS
DOWNLOADSDownload the file given below and transfer it to a separate folder on your phone and remember the location.
ROM FILEFor latest version of the ROM, check the original page →
Be sure to transfer the ROM file you downloaded above to your phone and remember the location of the files. You will need to flash them now on your device using either of ClockworkMod (CWM) or TWRP recovery.
We’ve got separate guide for CWM and TWRP recovery, so use the guide relevant to the recovery you have installed on your device.
GUIDE FOR CWM RECOVERY USERS
Boot into recovery mode. If you’re rooted, the easiest way to boot into recovery mode would be using the QuickBoot app. If not rooted, then follow the instructions below:
Power off your device and wait for 5-10 seconds until the device is fully switched off.
(For further help, Check out our exclusive page on Samsung Galaxy Ace Recovery Mode).
Create a Nandroid Backup from recovery. It’s optional but very important to do, so that in case something goes wrong you can restore to current status easily. For making a Nandroid Backup, go to Backup And Restore » Backup.
Now perform a Factory Reset (This will delete all apps and their settings and game progress). For this:
Select Wipe data/Factory reset, then select Yes on the next screen to confirm factory reset (screenshot).
First Install the ROM file:
Reboot your device. For this, go back to the main menu of recovery and select reboot system now.
That’s all. Your phone will now reboot and it will take some time as it’ll be phone’s first boot after installing Android 4.4, be extremely excited for this!
Note: In case your device gets bootloop (stuck at logo while rebooting), just do a factory reset (step 3) and you will be fine.
GUIDE FOR TWRP RECOVERY USERS
Boot into recovery mode. If you’re rooted, the easiest way to boot into recovery mode would be using the QuickBoot app. If not rooted, then follow the instructions below:
Power off your device and wait for 5-10 seconds until the device is fully switched off.
(For further help, Check out our exclusive page on Samsung Galaxy Ace Recovery Mode).
Perform a Factory Reset (this will delete all apps and their settings and game progress). For this:
Tap on Wipe » then at the bottom of the screen do a Swipe on the ‘Swipe to factory reset‘ option (screenshot).
First Install the ROM file:
Reboot your device. Go back to the main menu of recovery and tap on Reboot » then, tap on System to reboot your phone.
That’s all. Your phone will now reboot and it will take some time as it’ll be phone’s first boot after installing Android 4.4, be extremely excited for this!
Note: In case your device gets bootloop (stuck at logo while rebooting), just do a factory reset (step 3) and you will be fine.
FEEDBACK US!
Your suggestions and queries, if any, are most welcomed!
Restore Galaxy Note 10.1 Wi
In the world of custom ROM flashing, it’s often needed to revert back to a stock firmware on your device, for many reasons including wanting to recover the device from a bad custom ROM flash or simply returning to stock from a custom ROM which you don’t like. The Galaxy Note 10.1 is sure to receive a lot of attention in the custom ROM development world, which is where this guide comes in.
This guide will help you restore your Galaxy Note 10.1 Wi-Fi variant (N8010) to the stock N8010XXALGC (or simply XXALGC) Ice Cream Sandwich Android 4.0.4 firmware. Flashing this firmware will not affect your device’s warranty nor will it increase the dreaded flash counter nor show the yellow triangle when booting up the device, so it is perfectly safe to flash and will get your device back to stock.
Continue reading how you can restore your Galaxy Note 10.1 to the XXALGC Samsung firmware.
Compatibility
This firmware and the guide below are compatible only and only with Galaxy Note 10.1 Wi-Fi variant, model number N8010. It’s not compatible with any other device. Check your device’s model number in: Settings » About tablet.
Warning!
The methods and procedures discussed here are considered risky and you should not attempt anything if you don’t know completely what it is. If any damage occurs to your device, we won’t be held liable.
How to Install N8010XXALGC Firmware on Galaxy Note 10.1 Wi-Fi (N8010)
Extract the N8010XXALGC_N8010PAPALG5_PAP.zip file to obtain a file named N8010XXALGC_N8010PAPALG5_HOME.tar.md5 (the file name may end at .tar, which is normal as the .md5 extension may be hidden).
Extract the contents of the Odin 1.85.zip file to a folder.
Disconnect your tablet if it’s connected to PC, then switch it off.
Then, turn off the tablet. Then boot into download mode (odin mode) on the tablet by holding down Power and Volume Down buttons (volume down is the button next to the power button) together till you get a Warning!! screen. Here, press Volume Up to continue to enter download mode.
If you don’t get this message, then probably there is a problem with drivers. Make sure you’ve proper drivers installed (check step 2). Also, uninstall Kies from the Control Panel as well if you have it installed.
What to do if Odin gets stuck: If ODIN gets stuck and doesn’t seem to be doing anything, or you get a FAIL message (with red background) in ODIN, disconnect the tablet from the PC, close ODIN, press and hold the Volume Down + Power buttons till the tablet reboots and shows you the Warning!! screen, then press Volume Up to enter download mode again, then repeat the procedure from step 9.
[Important] After you get the PASS message and the tablet reboots, the tablet might get stuck at the booting animation/Samsung logo. If that happens, perform the following steps to make it boot. Remember that these steps will wipe your personal data like contacts, apps, messages, etc. If your tablet has already booted, skip these steps, the flash has been successful:
Boot to recovery mode — for which, press and hold down Power andVolume Up buttons together till the device reboots. When the screen turns on, let go of the power button but keep holding down the volume up button till the device boots into recovery.. Once you are in recovery mode, use volume keys to move the selection up and down and power key to select the option.
Go to Wipe data/Factory Reset and select it. Select Yes on next screen.
Then, select reboot system now to reboot the tablet, which will now boot properly.
If you run into any roadblocks while flashing the firmware, let us know and we’ll help you out.
Your Galaxy Note 10.1 N8010 has now been restored to the N8010XXALGC firmware. Do let us know how it works!
Leaked Android 4.4.2 Kitkat Firmware For At&T Galaxy Note 3 Sm
Contents show
WARNING!
AT&T GALAXY NOTE 3 SM-N900A OFFICIAL KitKat 4.4.2 FIRMWARE
STEP 0: CHECK DEVICE MODEL NO.
STEP 1: BACKUP YOUR DEVICE
STEP 2: INSTALL LATEST DRIVER
STEP 3: INSTALLATION INSTRUCTIONS
LEAKED FIRMWARE INFOFirmware Version N900AUCUCMLG
Android Version Android KitKat 4.4.2
Is this Official? NO! This is a leaked firmware, not yet released by Samsung.
Stability Good Enough for Daily Use.
Credits designgears
WARNING!This leaked test firmware contains a new bootloader due to which downgrading to previous stock firmwares WILL NOT BE POSSIBLE.
As of yet, root CAN NOT be retained or acquired in this leaked firmware.
Warranty may be void of your device if you follow the procedures given on this page.
You only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components.
AT&T GALAXY NOTE 3 SM-N900A OFFICIAL KitKat 4.4.2 FIRMWAREBefore you begin with guide instructions below, make sure your android device is adequately charged — at least 50% battery of the device.
STEP 0: CHECK DEVICE MODEL NO.To make sure your device is eligible with this, you must first confirm its model no. in ‘About device’ option under Settings. Another way to confirm model no. is by looking for it on the packaging box of your device. It must be SM-N900A!
Do not use the procedures discussed here on any other Galaxy Note 3 (including the Galaxy Note 3 variant at Sprint, Verizon, T-Mobile and other International variants) or any other device of Samsung or any other company. You have been warned!
STEP 1: BACKUP YOUR DEVICEBack up important data and stuff before you start playing around here as there are chances you might lose your apps and app-data (app settings, game progress, etc.), and in rare case, files on the internal memory, too.
For help on Backup and Restore, check out our exclusive page on that linked right below.
► ANDROID BACK UP AND RESTORE GUIDE: APPS AND TIPS
STEP 2: INSTALL LATEST DRIVERYou must have proper and working driver installed on your windows computer to be able to successfully flash this firmware on your AT&T Galaxy Note 3. In case you’re not sure, follow the link below for a definitive guide for installing driver for your Galaxy Note 3 on your computer.
► SAMSUNG GALAXY NOTE 3 DRIVERS INSTALLATION GUIDE
STEP 3: INSTALLATION INSTRUCTIONS DOWNLOADSDownload the firmware file given below.
FIRMWARE ZIP FILE STEP-BY-STEP GUIDEImportant Note: Backup important files stored on internal SD card of your device, so that in case a situation arises requiring you to do a factory reset after flashing the leaked firmware, which might delete internal sd card too, your files will remain safe on PC.
Disconnect the Galaxy Note 3 from PC if it is connected.
Boot your AT&T Galaxy Note 3 into Download Mode:
Power off your phone first and wait for 6-7 seconds after display is off
Press and hold these 3 buttons together until you see Warning! screen: Volume Down + Power + Home
If you don’t get the Added! message, here are some troubleshooting tips:
Make sure you have installed driver for Galaxy Note 3 as said above.
If you have already installed driver, then uninstall them and re-install back.
Connect using a different USB port on your PC.
Try a different USB cable. The original cable that came with your phone should work best, if not, try any other cable that’s new and of good quality.
Reboot phone and PC and then try again
If you see FAIL message instead of the PASS in Odin’s top left box, that’s a problem. Try this now: disconnect your Galaxy Note 3 from PC, close Odin, remove phone’s battery and put it back inside in 3-4 seconds and then repeat from Step 3 of this guide again.
Also, If device is Stuck at setup connection or on any other process, then too, try this: disconnect your Note 3 from PC, close Odin, remove phone’s battery and put it back inside in 3-4 seconds then repeat from Step 3 of this guide again.
FEEDBACK US!Your suggestions and queries, if any, are most welcomed!
Beanstalk Brings Android 4.4.2 Kitkat Update For T
Let’s see how to install the Android 4.4 KitKat Beanstalk ROM on your T-Mobile LG G2.
WARNING!
Warranty may be void of your device if you follow the procedures given on this page.
You only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components.
CHECK DEVICE MODEL NO.
To make sure your device is eligible with this, you must first confirm its model no. in ‘About device’ option under Settings. Another way to confirm model no. is by looking for it on the packaging box of your device. It must be D801!
Do not use the procedures discussed here on any other LG G2 variant or any other device of LG or any other company. You have been warned!
BEFORE YOU BEGIN..
You must do this pre-installation stuff before attempting to install the ROM on your T-Mobile G2 in order to avoid any complications later, and have a smooth and successful process.
GET CWM /TWRP RECOVERY FOR YOUR T-MOBILE LG G2You will need either of CWM or TWRP recovery for your T-Mobile LG G2 installed on your device, to be able to install the Android 4.4 KitKat ROM on your device.
If you don’t have any, we suggest you search for any one of them and install it first before proceeding any further. Google is your friend!
BACK UP YOUR DEVICEBack up important data and stuff before you start playing around here as there are chances you might lose your apps and app-data (app settings, game progress, etc.), and in rare case, files on the internal memory, too.
For help on Backup and Restore, check out our exclusive page on that linked right below.
► ANDROID BACK UP AND RESTORE GUIDE: APPS AND TIPS
CHARGE YOUR DEVICEIf your android device powers off due to lack of battery while the process is underway, it could damage the device.
So, make sure your device is adequately charged — at least 50% battery of the device.
EXAMPLE VIDEO
If you haven’t used a custom recovery, either CWM or TWRP, before, to install a .zip file of a ROM on anything else, then we suggest you first watch a video of that, given right below, to get familiar with the process.
DOWNLOADS
Download the files given below and transfer them to a separate folder on your phone and remember the location.
GAPPS FILE ROM FILE FOR T-Mobile LG G2, D801For latest version of the ROM, check the original page →.
Reminder: Before you proceed, make sure you’ve transferred the files you downloaded above to a separate folder on your T-Mobile LG G2.
STEP-BY-STEP GUIDE
Make sure you have backed up your phone adequately (including important data stored on internal memory).
NOTE:
Older versions of both CWM and TWRP recovery are not working with Android 4.4 based ROMs, throwing installation errors and WiFi bugs, which is why you need to use the latest version of either recovery. We believe, TWRP v2.6.3.0 and above, and CWM v6.0.4.3 and above, are working fine with Android 4.4 ROMs.
GUIDE FOR CWM RECOVERY USERS
Boot your T-Mobile LG G2 into recovery mode. For this:
Power off your device and wait for 5-10 seconds until the device is fully switched off.
Press and hold Volume Down and Power buttons together until you see LG Logo, upon which, release them both for a second and then then press them both buttons again together until you Factory Hard Reset screen.
└ In Recovery mode, use Volume buttons to navigate Up and Down between options and use Power button to select an option.
Create a Nandroid Backup from recovery. It’s optional but very important to do, so that in case something goes wrong you can restore to current status easily. For making a Nandroid Backup, go to Backup And Restore »Backup.
Perform a Factory Reset (This will delete all apps and their settings and game progress). For this:
Select Wipe data/Factory reset, then select Yes on the next screen to confirm factory reset (screenshot)
First Install the ROM File:
└ Make sure to first flash the ROM file and then the Gapps file.
Reboot your device. For this, go back to the main menu of recovery and select reboot system now.
That’s all. Your phone will now reboot and it will take some time as it’ll be phone’s first boot after installing Android 4.4, be extremely excited for this!
Note: In case your device gets bootloop (stuck at logo while rebooting), just do a factory reset (step 3) and you will be fine.
GUIDE FOR TWRP RECOVERY USERS
Boot into recovery mode. For this:
Power off your device and wait for 5-10 seconds until the device is fully switched off.
Press and hold Volume Down and Power buttons together until you see LG Logo, upon which, release them both for a second and then then press them both buttons again together until you Factory Hard Reset screen.
└ In Recovery mode, use Volume buttons to navigate Up and Down between options and use Power button to select an option.
Perform a Factory Reset (this will delete all apps and their settings and game progress). For this:
Tap on Wipe » then at the bottom of the screen do a Swipe on the ‘Swipe to factory reset‘ option (screenshot)
First Install the ROM file:
└ Make sure to first flash the ROM file and then the Gapps file.
Reboot your device. Go back to the main menu of recovery and tap on Reboot » then, tap on System to reboot your phone.
That’s all. Your phone will now reboot and it will take some time as it’ll be phone’s first boot after installing Android 4.4, be extremely excited for this!
Note: In case your device gets bootloop (stuck at logo while rebooting), just do a factory reset (step 3) and you will be fine. ALSO, CWM recovery is preferred in place of TWRP to flash Android 4.4 ROMs.
FEEDBACK US!It was easy to install Android 4.4 KitKat on your T-Mobile LG G2, right? Let us know how is it to your taste?
Your suggestions and queries, if any, are most welcomed!
Download/Install Android 4.4.2 Kitkat Update For T
Contents show
WARNING!
T-MOBILE GALAXY NOTE 3 OFFICIAL KITKAT 4.4 FIRMWARE
STEP 0: CHECK DEVICE MODEL NO.
STEP 1: BACKUP YOUR DEVICE
STEP 2: INSTALL LATEST DRIVER
STEP 3: INSTALLATION INSTRUCTIONS
STOCK FIRMWARE INFOFirmware Version N900TUVUCNB4
Android Version Android 4.4.2, KitKat
Is this Official? Yes! This is the official update by Samsung.
Release Date March 2013
Credits SamMobile
Here’s the official T-Mobile Galaxy Note 3 Android 4.4 KitKat update, directly from Samsung, that you CAN INSTALL MANUALLY yourself!
The Android 4.4 firmware name is, N900TUVUCNB4, and has been released officially today only.
You can install the KitKat update yourself using Odin software, that we have provided below with direct download links of firmware too.
So, Update T-Moble Galaxy Note 3 model n0. SM-N900T to latest Android 4.4.2 OS, KitKat now.
WARNING!Warranty may be void of your device if you follow the procedures given on this page.
You only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components.
T-MOBILE GALAXY NOTE 3 OFFICIAL KITKAT 4.4 FIRMWAREBefore you begin with guide instructions below, make sure your android device is adequately charged — at least 50% battery of the device.
STEP 0: CHECK DEVICE MODEL NO.To make sure your device is eligible with this, you must first confirm its model no. in ‘About device’ option under Settings. Another way to confirm model no. is by looking for it on the packaging box of your device. It must be SM-N900T!
Do not use the procedures discussed here on any other Galaxy Note 3 (including the Galaxy Note 3 variant at Sprint, US-Cellular, AT&T, Verizon and other International variants) or any other device of Samsung or any other company. You have been warned!
STEP 1: BACKUP YOUR DEVICEBack up important data and stuff before you start playing around here as there are chances you might lose your apps and app-data (app settings, game progress, etc.), and in rare case, files on the internal memory, too.
For help on Backup and Restore, check out our exclusive page on that linked right below.
► ANDROID BACK UP AND RESTORE GUIDE: APPS AND TIPS
STEP 2: INSTALL LATEST DRIVERYou must have proper and working driver installed on your windows computer to be able to successfully flash stock firmware on your T-Mobile Galaxy Note 3.
In case you’re not sure, follow the link below for a definitive guide for installing driver for your Galaxy Note 3 on your computer.
► SAMSUNG GALAXY NOTE 3 DRIVERS INSTALLATION GUIDE
STEP 3: INSTALLATION INSTRUCTIONS DOWNLOADSDownload the Odin zip file and firmware file given below. Transfer both Odin and firmware file to a separate folder on your computer just to keep things tidy.
ODIN ZIP FILE FIRMWARE ZIP FILE STEP-BY-STEP GUIDEImportant Note: Backup important files stored on internal SD card of your device, so that in case a situation arises requiring you to do a factory reset after flashing stock firmware, which might delete internal sd card too, your files will remain safe on PC.
Extract/Unzip the Odin zip file, Latest Odin3 v3.09.zip on your computer (using 7-zip free software, preferably) to get this file: Odin3 v3.09.exe
Extract/Unzip the Firmware zip file, N900TUVUCNB4_N900TTMBCNB4_TMB.zip on your computer (using 7-zip free software, preferably) to get this file: N900TUVUCNB4_N900TTMBCNB4_N900TUVUCNB4_HOME.tar.md5
Move the firmware file, N900TUVUCNB4_N900TTMBCNB4_N900TUVUCNB4_HOME.tar.md5, in the same folder in which you extracted Latest Odin3 v3.09.zip (Just for your convenience, that is). So, now you’ll have the following files in that folder:
Odin3 v3.09.exe
N900TUVUCNB4_N900TTMBCNB4_N900TUVUCNB4_HOME.tar.md5
Disconnect the Galaxy Note 3 from PC if it is connected.
Boot your T-Mobile Galaxy Note 3 into Download Mode:
Power off your phone first and wait for 6-7 seconds after display is off.
Press and hold these 3 buttons together until you see Warning! screen: Volume Down + Power + Home.
If you don’t get the Added! message, here are some troubleshooting tips:
Make sure you have installed driver for Galaxy Note 3 as said above in ‘Before you begin..’ section.
If you have already installed driver, then uninstall them and re-install back.
Connect using a different USB port on your PC.
Try a different USB cable. The original cable that came with your phone should work best, if not, try any other cable that’s new and of good quality.
Reboot phone and PC and then try again.
Load the firmware file (extracted in Step 1) into Odin as instructed below:
Now in the Option section of Odin, make sure that Re-Partition box is unchecked. (Auto Reboot and F. Reset Time boxes remain checked, while all other boxes remain unchecked.)
Double check the above two steps.
If you see FAIL message instead of the PASS in Odin’s top left box, that’s a problem. Try this now: disconnect your T-Mobile Galaxy Note 3 from PC, close Odin, remove phone’s battery and put it back inside in 3-4 seconds, open Odin and then repeat from Step 3 of this guide again.
Also, If device is Stuck at setup connection or on any other process, then too, try this: disconnect your T-Mobile Galaxy Note 3 from PC, close Odin, remove phone’s battery and put it back inside in 3-4 seconds, open Odin and then repeat from Step 3 of this guide again.
FEEDBACK US!Your suggestions and queries, if any, are most welcomed!
Update the detailed information about Cyprus Galaxy Note 10.1 Gets Kitkat 4.4.2 Update: N8000Xxudnh2 on the Hatcungthantuong.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!