Trending March 2024 # Device Pci Requires Further Installation: 3 Ways To Fix It # Suggested April 2024 # Top 10 Popular

You are reading the article Device Pci Requires Further Installation: 3 Ways To Fix It updated in March 2024 on the website We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested April 2024 Device Pci Requires Further Installation: 3 Ways To Fix It

Device PCI Requires Further Installation: 3 Ways to Fix it Discover what to do if a device requires further installation on Windows 10/11








Even if your computer runs smoothly, you may come across errors such as the Device requires further installation log in Device Manager.

The log usually appears when the driver for the device is not fully installed.

To fix things, we recommend you update the driver. Also, make sure to check all possible sources for the updated version.



To fix Windows PC system issues, you will need a dedicated tool

Fortect is a tool that does not simply cleans up your PC, but has a repository with several millions of Windows System files stored in their initial version. When your PC encounters a problem, Fortect will fix it for you, by replacing bad files with fresh versions. To fix your current PC issue, here are the steps you need to take:

Download Fortect and install it on your PC.

Start the tool’s scanning process to look for corrupt files that are the source of your problem

Fortect has been downloaded by


readers this month.

Devices and drivers are crucial parts of your operating system, and it’s imperative that these run smoothly. Though, it is not always the case. Many users encountered the Device requires further installation error log in Windows.

The worst part, this error can appear out of the blue and affects almost every device, no matter even if you are running the latest version of the OS.

What does it mean when a device requires further installation?

This issue is similar to What needs your attention error message, and it usually appears if there are driver problems, so you might have to reinstall them.

Also, in this case, Windows usually is not done installing the driver, and that’s why you see the error message.

Here are some of the devices for which you may see the error log, as well as other error variations that you can fix with the solutions below:

Device PCI requires further installation GPU – Many users reported the error log with this PCI device.

Camera device requires further installation – The most is most commonly encountered with cameras or webcams.

Device PCI requires further installation Wi-Fi – Any PCI device, or simply the ones connected to the motherboard, or prone to this error, including the Wi-Fi adapter.

Device BTHENUM requires further installation – This is a system driver related to the Bluetooth functionality and allows connection to devices via Bluetooth. Restarting the device should fix the problem for most.

Device PCI requires further installation NVIDIA – The issue is often seen with the NVIDIA graphics, and the fixes below would help.

Device VMbus requires further installation – VMbus is related to Hyper-V and is sometimes affected by the error.

Device PCI requires further installation in Windows 10/11 – The solutions below are applicable for both OSs.

Device PCI had a problem starting – Update the driver before anything else in order to fix this error.

Device PCI ven_8086&dev/ven_1002&dev requires further installation – You can also manually install the driver directly from the manufacturer’s website.

Follow along to find out how to fix all of these errors!

How do I fix PCI requires further installation?

Before we head to the full-fledged solutions, here are a few quick tricks and workarounds that worked for many users in case of a trivial underlying cause:

Make sure you are viewing the latest log. In many cases, users later realized that the Device requires further installation log was an old one, and the latest confirmed a successful installation.

Restart the computer.

Wait for a while and let Windows completely install the drivers if you are seeing the error right after an upgrade.

Disconnect and reconnect the affected device. Also, if you have multiple ports on the computer, try connecting it to another one. Besides, you may use another port type, for instance, connect a device plugged into USB 2.0 to a USB 3.0 port, and vice versa.

If this doesn’t help, try the following methods.

The very first solution you should consider in order to fix device requires further installation is to make sure that your drivers are up-to-date. Thus, follow the steps below to apply the method accordingly.

Expert tip:

3. Now, select Search automatically for drivers.

4. Wait for Windows to find the best available version on the system and install it.

5. Restart your PC to apply the changes.

Alternatively, you can try automatic updater software such as Outbyte software. It will automatically update your drivers and fix any damaged or missing drivers on your PC.

The best automatic software for updating your device drivers without any effort.

Free trial Download now

2. Manually install the driver

This method has helped several users fix the Device driver requires further installation error in Windows, and we recommend you give it a try.

3. Check for issues

If wasn’t the driver, you could check for issues in Security and Maintenance and fix them in no time.

By now, we expect the Device requires further installation error to be fixed. In case it persists, we recommend you consult a professional and get your PC looked at since it could be a hardware issue.

Also, get the best driver updater software for Windows and stop worrying about issues with it. Besides, running the latest driver version will boost the computer’s performance.

Still experiencing issues?

Was this page helpful?


Start a conversation

You're reading Device Pci Requires Further Installation: 3 Ways To Fix It

3 Ways To Fix Unknown Usb Device Port Reset Failed Error

3 Ways to Fix Unknown USB Device Port Reset Failed Error Port reset can fail due to old or broken USB device




A broken or outdated USB driver can cause errors.

Switching to another USB port can help detect where the issue is occurring.

Disabling Fast startup will prevent selective suspension for USB devices.



Try Outbyte Driver Updater to resolve driver issues entirely:

This software will simplify the process by both searching and updating your drivers to prevent various malfunctions and enhance your PC stability. Check all your drivers now in 3 easy steps:

Download Outbyte Driver Updater.

Launch it on your PC to find all the problematic drivers.

OutByte Driver Updater has been downloaded by


readers this month.

One of the errors users complain about is the Windows USB port reset failure that appears in the device manager while the computer is trying to read the device.

In addition, receiving an error message such as this indicates that your USB device is not detected by the PC or won’t work properly.

Fortunately, there are some methods you can use to fix the Windows USB port reset failed in Windows 10 error and other related errors like Unknown USB device port reset failed USB C. We’ll go through them all in the following sections.

What does Unknown USB device port reset failed mean?

The Unknown USB device port reset failed is an error message on the USB device descriptor. Whenever the descriptor responds with a failed error message, It indicates that it cannot recognize a USB device or the USB device won’t function properly.

In short, the error message in the USB descriptor means something is wrong with the USB device. As a result, the computer can’t initiate it.

Why does port reset fail?

Broken or old USB drivers: When the USB driver is outdated or broken, it’ll prompt many errors and prevent the computer from reading.

Selective disable: Windows initiates the selectively disable mode to save power. However, if the program prevents USB activities, it can cause issues with the computer accessing it.

Broken USB device: Many things can happen to the USB device if it falls or gets tampered with. Hence, it can prevent it from functioning.

What can I do if the Unknown USB Device Port Reset Failed in Windows 11?

Here’s what you should do first:

One way to determine where the problem lies is to plug the device into another USB port. If it works perfectly, then the issue is with the port; if not, the device may be broken. We recommend you try using the USB device on another computer to be sure if it’s broken.

1. Uninstall the USB drivers

It will help fix the Unknown USB device port reset failed Dell dock error.

It is a perfect fix for the USB hub that failed to reset the code 43 error. Users can read through our article on how to update drivers in Windows.

Often, your computer system might not be able to update the generic drivers for your hardware and peripherals correctly. There are vital differences between a generic driver and a manufacturer’s driver. Finding the correct driver versions for every hardware component can become tiresome.

That’s why a dependable updater can help you find and update your drivers automatically. We strongly suggest the Outbyte Driver Updater, and here’s how to do it:

Download and install the Outbyte Driver Updater app.

Launch the software and wait for the app to detect all incompatible drivers.

Now, it will show you a list of all outdated drivers to select the ones to Update or Ignore.

Restart your PC to ensure the applied changes.

Outbyte Driver Updater

Maintain your device healthy by letting OutByte Driver Updater find the latest driver options.

Free trial Download now

Disclaimer: You may need to upgrade the app from the free version to perform specific actions.

3. Disable Fast Startup

Expert tip:

After trying the above fixes and still being unable to solve the problem, we recommend you switch to a new USB device.

What is error code 43 in USB?

The error code 43 in USB is a somewhat straightforward error indicating that Windows detected an error in the USB device.

As a result, Windows has shut down the device’s operation, preventing it from running on the computer.

Furthermore, it indicates that a driver component in the USB device informs Windows about a fault in the device. Consequently, it can prompt the Unknown USB device port reset failed code 43 Windows 10 in Windows.

How to recover data from external USB flash drives with code 43?

An easy way to recover data from a USB drive that shows code 43 would be to use a reliable recovery tool. These come in useful and help recover corrupt or deleted data from flash drives, in addition to when it shows specific error codes.

Also, updating the USB port drivers and those for the flash drive may help if you take a manual approach.

Nonetheless, you can check our article about how to create a bootable USB drive for Windows 11. Besides, we recommend you learn how to boot from USB in Windows 10.

Still experiencing troubles? Fix them with this tool:


Some driver-related issues can be solved faster by using a tailored driver solution. If you’re still having problems with your drivers, simply install OutByte Driver Updater and get it up and running immediately. Thus, let it update all drivers and fix other PC issues in no time!

Was this page helpful?


Start a conversation

Konqueror Could Not Connect To Host: 3 Ways To Fix It

Konqueror Could Not Connect to Host: 3 Ways to Fix It One or more browser plugins may be missing from your system




If you get a could not connect to host error message, your PC can’t connect to the host name or IP address of the website.

A host error could mean your server is down and clearing the cache could be the remedy.

Disabling the firewall temporarily might also help, so don’t hesitate to apply the steps below. 

Struggling with various browser issues? Try a better option: Opera One

You deserve a better browser! Over 300 million people use Opera One daily, a fully-fledged navigation experience coming with various built-in packages, enhanced resource consumption, and great design.

Here’s what Opera One can do:

Optimize resource usage: Opera One uses your Ram more efficiently than Brave

AI and User Friendly: New feature directly accessible from the sidebar

Gaming friendly: Opera GX is the first and best browser for gamers

⇒ Get Opera One

You may have encountered a Konqueror could not connect to host error when attempting to open a website in the browser. This can be caused by multiple things and the solution depends on what is causing it. The first thing you need to do is figure out what is causing this error.

This can be frustrating, as it makes it seem like the website is down when in fact, it might just be temporarily unavailable.

It could be due to technical issues on your end or on the server’s end, but most commonly it’s because of a problem at the server. Other times, it could be a problem with your PC and your apps won’t connect to the internet.

What does it mean could not connect to host? 

If you get a could not connect to host error message, it means that your computer can’t connect to the host name or IP address of the website you’re trying to reach. The server or host you are trying to connect to may be unresponsive.

This can happen for a number of reasons:

Your computer isn’t connected to the internet – The first step in troubleshooting is to verify that you are actually connected to the internet or it’s just your internet that is too slow. You can use an internet speed tester to check how fast your connection is.

Browser plugins – One possible cause for this error message is that one or more of your browser plugins may be missing from your system or corrupt due to an outdated version.

Your network settings are incorrect – If you are behind a firewall or using a dynamic IP address Konqueror may not be able to connect.

Virus infection – It is also possible that your computer is infected with malware or adware. Make sure that your antivirus software is up-to-date, and run a scan on both the computer and its browser cache.

The website has been taken offline – There’s a possibility that the website you’re trying to access is down or inaccessible. This could be because of technical issues on the server or because of maintenance. Another possible cause for this error is that the site you’re trying to visit has moved its location.

What’s the latest version of Konqueror? The latest stable version is 21.12.3 (released February, 2023). 

Quick Tip:

To get back online fast, use another browser. For an error-free experience, we recommend Opera. It’s lightweight, up-to-date, and includes all the standard features you need in a browser.

On top of that, with Opera, you will be able to create personalized workspaces, connect quicker to social media apps thanks to its built integrations and protect your privacy with the free, unlimited VPN.


Say goodbye to errors with this performance-optimized browser!

Free Visit website

How do I fix Konqueror could not connect to host?  1. Check your internet connection

If you are using a wired network connection, check that all cables are securely connected and that no cable is damaged or frayed. 

In case it is a wireless network connection, make sure that the router has power and is broadcasting its signal correctly. You should also ensure that your device is within range of the router’s signal. 

2. Clear cache and cookies

Cookies are pieces of data stored on your computer or mobile device that can be used to help you log in or navigate through the web pages you visit. They also can be used to store private information, such as preferences and shopping cart contents.

As such, clearing cookies isn’t always necessary but if you’re having trouble logging in or if something doesn’t seem right while browsing online then it’s usually worth checking your cookies first before moving on to other troubleshooting steps.

3. Disable firewall temporarily

If after attempting the above solutions you are still facing the problem, try an alternative browser. The issue could be browser-related and may take a few moments before it is back to functioning.

Should you encounter any other related errors such as internet connected but browser not working, refer to our detailed guide on how to go about the issue.

Still experiencing issues?

Was this page helpful?


Start a conversation

8 Ways To Fix : Default Boot Device Missing Or Boot Failed

Default Boot Device Missing or Boot Failed is a boot error that happens when Windows fails to detect a boot device after powering on. This may happen due to misconfigured, corrupt or a damaged boot drive. 

Simple fixes include restarting the device again, reseating the boot drive and reattaching any loose or disconnected cables. Additionally, replacing/repairing any damaged or faulty components or removing any bootable peripherals can also help fix the issue.

To fix the Default Boot Device Missing or Boot Failed error, check if the boot media is detected on BIOS. If any boot media cannot be found, you will need to inspect the hardware for any issues. 

Components such as the boot storage media, cables or the memory may be unplugged, damaged or have malfunctioning components.  you will need to inspect each element carefully and fix or replace them.

Now, carefully remove the side panel to get access to the internals of the computer

Check for any disconnected, misaligned or damaged wires

If problems are found, reconnect them properly or replace them

Reseat, repair or replace if any damages are found

For laptops, 

Once inside, check for the same issues described above and reseat, replace or repair the affected components

The first thing we’ll be doing is to manage the BIOS settings. If by any chance the BIOS settings like the date/time and the Legacy/UEFI boot mode are changed or modified, the system may be unable to boot. 

Turn off your device and reboot it

Before the logo splash screen appears, repeatedly press the BIOS key (Function keys or Del key) and enter the BIOS

Sometimes, due to incorrect date and time settings in BIOS, the device may throw this error. It could happen due to reasons such as misconfigured settings, problems with the CMOS battery, CMOS connection issues or the battery becoming old.

Change the values to the current date and time values

Save the changes by pressing F10 or Y/N keys while exiting

 Reboot your device normally

Changing the Boot mode from UEFI to Legacy can sometimes help your device detect the boot drive. As sometimes UEFI boot mode can be incompatible with the device. To change the boot mode.

Search for the Advanced Boot Options or Boot in the BIOS

Save and apply changes 

Reboot your device normally

The next solution is now to change the boot order from the BIOS. If the primary boot partition has been changed or is reset from the BIOS, this error could appear. To fix this, resetting the boot order or changing the boot partition cloud help solve the issue.

Open the BIOS and search for the Boot option

Save and exit the BIOS

Restart your device and check if the device boots normally

If changing the boot order did not work, the error could be appearing because of corrupt system files. To fix, you will need to perform repairs from the Windows Recovery Environment (WinRE). The Automatic Repair function detects and troubleshoots any startup errors.

Download the media creation tool and create a recovery media

Power off your device and insert the recovery media

Before the Windows/manufacturer logo appears, repeatedly press the boot key (varies according to model, refer to product documentation or support website)

On the boot menu, select the recovery media as the boot drive 

Inside, select the keyboard and language preference

Additionally, if this method does not work, you can try and reset the PC while retaining all the personal data on your device. Resetting the PC will however, remove all the system and  hardware configurations.

Note: Changing the storage controller mode from IDE/AHCI to RAID will cause loss of data. Make sure to backup or clone the disk to a separate storage media before attempting.

Another cause that might be triggering this error could be due to misconfigured storage controller settings. To fix this, you will need to change the storage controller setting from the BIOS

On the BIOS, search for settings labelled SATA control, Configure SATA or similar

Save the changes and reboot your device normally

Note: This fix is only applicable for devices supporting Legacy boot mode

If the boot partition has been deactivated, this can cause your device to fail to boot. To fix this, you will need to re-enable the boot partition from disabled to active in the command prompt.

Boot your device to the Windows recovery environment by using the recovery media

Select the keyboard and language settings

Remove the installation media and restart your device normally

Incase of a corrupt boot sector, you will need to rebuild it from command prompt to solve the issue.  To do this, first boot to the Windows Recovery Environment. Depending on the type of partition, MBR or GPT, you can use two methods to fix the boot sector

For drives having MBR partition

Open Command prompt in the Windows recovery environment

To repair drives having GPT partition

Close the command prompt window and restart your device to see if the issue has been resolved

Note: you will need a storage device with a capacity of at least 8GB, internet connection and a working PC to perform this fix.

The final software fix is to reinstall Windows using the recovery media. This process installs a fresh copy of Windows in the device. This essentially eliminates any software issues related to the boot drive.

First, create a bootable recovery media and insert it on your affected device. Make sure that the device is powered off

On the Windows Setup screen, follow the on-screen prompts

Let the process complete and boot the device normally

If the device fails to boot or is stuck in a boot loop, you may need to change the boot priority from the recovery media to Windows Boot Manager

6 Ways To Fix Battery Life Problems Of Your Ios 8 Device

For us iOS 8 users, our wish is for Apple to solve the battery life problems. While every update has its own flaws and improvements, the recent iOS 8.2 update was reported to be a stable one, maintaining a solid battery life for the iPhone 5 according to GottaMobile. However, if you feel that your device consumes a lot of battery life, perhaps you need to apply these tips to fix them.

With a few tweaks, installations of third-party apps, and changes in settings, we can optimise a device’s battery performance.

1. Toggle Off: Location Services, Background App Refresh, and System Services

It’s time to get around the General Settings and tweak these seemingly hidden settings that drain your battery faster. Turning off the Location Services will save you tons of battery life. You can also scroll down to System Services and toggle off each function on the list. This is quite tricky because even if you’ve toggled off “Location Services,” they still run in the background and are toggled on. Lastly, go to “Background App Refresh” and do the same thing.

2. Use Battery Management and Diagnostic Apps

Cheetah Mobile Inc.’s Battery Doctor is one of the popular battery management apps for Android, and while it ranks pretty well on Google Play Store, you can also install it on your iOS 8 device to systematize your charging times and monitor charging cycles. You may also try System Status Lite as your battery and device management and diagnostic app.

3. Decrease Auto-Lock Time and Adjust Display

Change the setting to “1 Minute” so it’ll automatically turn off the display when not in use. Don’t forget to dim the display as well as turned-off notification banners that keep on popping up and activating your device’s display; toggle off the “Auto Brightness” and adjust it manually to decrease the brightness.

4. Hard Reboot If Battery Temperature Increases

5. Refrain from Using Dynamic Wallpapers

These animated wallpapers may look good on screen, but they’re also taking up the device’s accelerometer and graphics processor which adds up to the internal process and incrementally eats up the battery life.

6. Airplane Mode When Connected to Wi-Fi Spot

If you’re connected to a WiFi spot and most of your communications are via social media and instant messaging apps, you might as well turn off your cellular data network to save more battery and switch to Airplane Mode. You can also speed up the charging time when the device is on Airplane Mode.

Other Practical Tips

Thanks to the updated iOS 8, we can preview the battery usage and check out the apps that drain the battery while we’re using it. There are other ways to extend the battery life – you can tweak your settings in Accessibility, deactivate Siri, Bluetooth and WiFi, don’t “Push” your emails to your mailbox, and deactivate the notifications of some apps you don’t use.

Is there anything I missed? Feel free to drop your tips for our readers on how they can fix battery issues on their iOS 8-powered devices. What do you think of the latest software update and how it affects battery issues?

Photo credit: Karlis Dambrans

Maria Krisette Capati

Krisette is a technology writer who loves to cover disruptive technologies, trends, and a myriad of rumors and news updates. To satiate the inconsolable longing to feed her gadget addiction, she simply writes and tinker her gadgets for reviews. You may follow her blurbs, too! @krisettecapati

Subscribe to our newsletter!

Our latest tutorials delivered straight to your inbox

Sign up for all newsletters.

By signing up, you agree to our Privacy Policy and European users agree to the data transfer policy. We will not share your data and you can unsubscribe at any time.

Fix: Windows 10 Prevents Antivirus Installation

FIX: Windows 10 prevents antivirus installation




If Windows 10 prevents you from installing an antivirus, you will not have that extra protection.

This problem can be tricky, but you should make sure that you don’t have another antivirus already installed.

Windows Defender might be blocking the install so try to use a more reliable antivirus instead.

You may also clean your PC automatically by using a dedicated tool.



To fix various Windows 10 errors, we recommend Fortect:

This software will repair common computer errors, protect you from file loss, malware damage, hardware failure and optimize your PC for maximum performance. Fix PC issues and remove virus damage now in 3 easy steps:

Download and Install Fortect on your PC

Launch the tool and Start scanning to find broken files that are causing the problems

Fortect has been downloaded by


readers this month.

In today’s Internet world, it is very dangerous to run your computer without any protection. So, people install antivirus programs to keep their computer as safe as possible.

But the new operating system always brings some problems with itself, and this time Windows 10 caused problems with installing antivirus software to some users.

Your antivirus software should work just fine on the new Windows operating system, but if you’re unable to install it for some reason, follow the instructions below, and hopefully, you’ll solve the problem.

Several users reported that they are unable to install antivirus on their Windows 10 PC. Regarding antivirus problems, users reported the following issues:

Not able to install antivirus on Windows 10 – According to users, some of them are unable to install antivirus on their Windows 10 PC. This can occur if your antivirus isn’t compatible with Windows 10.

Virus blocking antivirus installation – Sometimes malware can prevent you from installing your antivirus. To fix that, you need to create a rescue disk on a different PC and use it remove the malware.

Antivirus program won’t install – In some cases, your antivirus won’t install due to file corruption. However, you can fix the problem by running DISM and SFC scans.

Computer won’t let me install antivirus – In certain cases, you can’t install an antivirus on Windows 10. This can happen due to certain third-party applications, so be sure to remove them.

What do I do if Windows 10 prevents installing an antivirus? 1. Turn off Windows Defender

Windows Defender is Microsoft’s built-in security tool, which protects your Windows 10 if you don’t have any other antivirus installed.

It shouldn’t make any problems with the third-party antivirus, but maybe some features of the antivirus conflict with Windows Defender, and that’s why you can’t install it.

So, try to turn off Windows Defender, and then install the third-party antivirus.

Now your Windows Defender is disabled, and you can try to install your antivirus program again.

2. Check if your antivirus is compatible with Windows 10

If you’re using some less famous antivirus, there’s a chance that it’s not compatible with Windows 10.

So, just in case, check out our list of all antivirus programs that are compatible with Windows 10, and if your antivirus is not on the list, you should consider getting a new protector of your system.

If you’re looking for antivirus that works with Windows 10, we have already given you a couple of recommendations in Solution 3.

3. Make sure you don’t have any other antivirus installed

You should know that two antivirus programs don’t function well together, so if you already have some other antivirus installed, you should uninstall it before you try to install the new one.

There’s a chance that you didn’t even know that you have another antivirus on your computer, as it maybe came as a bloatware, along with another software you installed on purpose.

Then again, you could choose an alternative antivirus altogether, one that doesn’t any compatibility issues at all, such as the one recommended below.

This solution is rated as being one of the top antivirus tools in the world in terms of sheer protection, and that is thanks to the constant live scanning features that do not slow your PC down in any way.

ESET Internet Security

Try an antivirus that is really protecting your data but doesn’t interfere with your programs.

Free trial Visit website

4. Remove problematic applications

Sometimes third-party applications on your PC can interfere with your system and cause this problem to appear.

To fix the issue, you need to find and remove that application from your PC. Users reported that applications such as System Mechanic can cause this issue to appear, so be sure to remove them from your PC.

In order to completely remove an application, you need to use uninstaller software. These tools are designed to remove all files and registry entries associated with the problematic application, so be sure to use one for your applications.

Dedicated uninstaller software not only will remove any apps that are preventing you from installing an antivirus, but it will get rid of residual files as well since this too can contribute to such issue.

5. Run a SFC and DISM scans

5.1 Run a SFC scan

Expert tip:

5.2 Run a DISM scan

Start Command Prompt as administrator as shown in the previous solution.

When Command Prompt starts, enter the following line, and press Enter: DISM /Online /Cleanup-Image /RestoreHealth

DISM scan will now start. This scan can take up to 20 minutes or more, so don’t interrupt it.

When the DISM scan is finished, check if the problem still persists. If the problem is still present, or if you were unable to run SFC scan before, try to run it again. After running SFC scan again, the issue should be resolved.

If your Windows 10 prevents antivirus install, the issue might be file corruption. Your system files can become corrupted and that can lead to this and many other problems.

Fortunately, there are several ways to fix file corruption on your PC. One of the easiest ways is to run an SFC scan.

SFC scan is designed to repair a corrupted Windows 10 installation.

6.  Clean your PC with a dedicated tool

According to users, sometimes this issue can be caused by temporary files on your PC. To fix this problem, you need to remove temporary files.

There are several ways to do it, and the simplest one might be to use a dedicated tool. You already have the Disk Cleanup tool embedded in Windows but that doesn’t have too many features.

If you want to use a more complex tool, you might want to try using Ashampoo WinOptimizer.

7. Perform a Clean boot

Third-party applications can interfere with your antivirus, and prevent you from installing it. If your Windows 10 prevents antivirus install, you might be able to fix the problem by performing a Clean boot.

This is rather simple and you can do it by following the steps above.

After you install your antivirus, enable all startup applications and services once again.

8. Restart the Windows Audio service

After restarting the service, try to install your antivirus again.

If your Windows 10 prevents antivirus install on your PC, the issue might be your services. Speaking of services, users reported that Windows Audio service is a common cause for this problem.

To fix the issue, you need to find this service and restart it.

9. Disable Fast Startup

Windows 10 comes with an interesting feature called Fast Startup. This feature combines shutdown and hibernation into one allowing your system to boot faster.

Although this is a useful feature, it can lead to certain issues. Speaking of issues, few users reported that this feature can prevent you from installing certain applications, such as your antivirus.

After doing that, the Fast Startup feature should be disabled. Keep in mind that your PC might boot a bit slower after disabling this feature.

This problem can also occur with your company computers so you should also look at our list with the best antiviruses for Windows Server.

Was this page helpful?


Update the detailed information about Device Pci Requires Further Installation: 3 Ways To Fix It on the website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!