You are reading the article Enable Or Disable Adaptive Brightness In Windows 10 updated in March 2024 on the website Hatcungthantuong.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested April 2024 Enable Or Disable Adaptive Brightness In Windows 10
Adaptive Brightness is nothing new. If you bought a laptop in recent years, then your system most probably has it enabled by default thanks to the ambient light sensor built into them.
Adaptive brightness is a simple feature that adjusts your screen brightness according to the light around you. Remember the smartphone feature that we always take for granted? Yes, it’s exactly that. Adaptive brightness will dim or brighten the display depending on your surroundings so that no matter where you are, your display won’t be too dark or too bright. That being said, in Windows 10 the Adaptive Brightness feature is only available to Pro and Enterprise users.
As useful as it is, most of us like to manually adjust the screen brightness so that we can have a consistent experience. Moreover, it can get quite annoying at times when Windows is constantly adjusting the screen brightness when you are moving between different apps. Unfortunately, there is no way you can tweak and tune the adaptive brightness feature in Windows. However, you can easily enable or disable it.Enable or Disable Adaptive Brightness in Windows 10
The above action will open the Advanced Power Options window. Scroll down and locate the Display option and expand it to reveal the Adaptive Brightness option. By expanding the option you can quickly enable or disable it for both the battery power or when it’s plugged in.
In case you cannot locate the Adaptive Display settings, chances are that your laptop may not have a built-in ambient light sensor.Conclusion
If you are looking to somehow make your computer screen easier on your eyes then you are better off using chúng tôi than depending on the Adaptive Brightness feature.
Vamsi is a tech and WordPress geek who enjoys writing how-to guides and messing with his computer and software in general. When not writing for MTE, he writes for he shares tips, tricks, and lifehacks on his own blog Stugon.
Subscribe to our newsletter!
Our latest tutorials delivered straight to your inbox
Sign up for all newsletters.
You're reading Enable Or Disable Adaptive Brightness In Windows 10
Windows 11/10 has been getting a lot of useful features. These features released are both consumer-based and developer-based. Along with this, they have not missed improvising the old features. One of these features is USB Selective Suspend feature.What is USB Selective Suspend feature in Windows?
In Windows OS, the Selective Suspend feature allows the system to save power by putting certain USB ports into a suspended mode. It lets the hub driver suspend a single port but does not affect the functioning of other ports. For instance, it’s similar to how users put their laptops or other devices in Sleep Mode – Selective Suspend is almost like that. The feature which makes it so interesting is that it can suspend a specific USB port individually, without affecting the power of the entire USB port. However, the driver for the USB device must support Selective Suspend for it to run right.
The USB Core Stack supports a modified revision of the Universal Serial Bus Specification and is called ‘selective suspend’. This allows the Hub Driver to suspend a port and help conserve the battery. Suspending services like Fingerprint Reader, etc., which are not required all the time, helps improve power consumption. The behavior of this feature is different for devices operating in Windows XP and kept improving in Windows Vista and later versions.
Users don’t really need this on a system that is already charging and can avail of the plug-in power whenever it needs to. This is why Windows lets users enable the USB Selective Suspend based on the computer’s plug-in or battery. But the Selective Suspend feature isn’t exactly a requirement on a desktop machine that is plugged into power. When a USB port is powered down, it doesn’t necessarily save that much of power on a desktop. That’s why Windows allows you to enable or disable USB Selective Suspend based on the computer being plugged in or on battery power. This feature is incredibly helpful in portable computers for power-saving purposes.How to enable or disable USB Selective Suspend
Some users have reported that at times the USB port does not get turned back on after Selective Suspend has been applied. Or sometimes even turns itself off without warning. To fix this, you need to disable the USB Selective Suspend feature on your system. Here’s how you can do it:
Related: USB Suspend:USB Device not Entering Selective SuspendVia Power Options
Open Control Panel on your Windows PC. To do this, search for Control Panel in the search box.
Now a new and more detailed box of Advanced power options will appear. There will be a menu that says USB Settings.
Expand that option, and you will find two sub-options there that will be labeled as On Battery and On Power.
You can choose to enable both of them individually as per your choice.
Related: Selective Suspend causes USB devices on USB hub to stop functioning.Using Windows Registry
To disable the Selective Suspend feature via the Registry Editor, do the following:
Since this is a registry operation, it is recommended that you back up the registry or create a system restore point as necessary precautionary measures. Once done, you can proceed as follows:
Press Windows key + R to invoke the Run dialog.
In the Run dialog box, type regedit and hit Enter to open Registry Editor.
Navigate or jump to the registry key path below:HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesUSB
Input 1 in the Value data field.
Exit Registry Editor.
Restart your PC.
In our next post, we will see what you can do if the USB Selective Suspend is disabled.
With a phone that’s as big as the Galaxy S22 Ultra, you might find yourself wanting to rotate the screen from time to time. However, there will be times when the auto-rotate functionality just “gets in the way”, rotating apps when you don’t want them to. This can happen because of the gyroscope sensor built into the Galaxy S22 line of phones, which has a tendency of occasionally being too sensitive. Today, we’re taking a look at how you can enable or disable the auto-rotate functionality on your Galaxy S22.Galaxy S22: Enable/Disable Auto Rotate Screen
By default, auto-rotate is turned on, meaning that whenever you move your Galaxy S22 between landscape and portrait modes, the screen will automatically adjust. Thankfully, there are two different ways that you can go about turning this feature off, and the first doesn’t require you to go into the Settings app.
Unlock your Galaxy S22.
Swipe down on the Home Screen to reveal the Notification Shade.
Swipe down again to reveal the full Quick Settings panel.
Tap the icon labeled Portrait.
Swipe up from the bottom to dismiss the Quick Settings panel.
It’s extremely convenient being able to just swipe down on the home screen (twice) and access the Quick Settings toggle for auto-rotate. By doing so, you can quickly and easily turn the feature on or off, which can come in handy if you’re switching between different apps or the webpage you are viewing is better when in landscape mode as opposed to portrait.Galaxy S22: Enable/Disable Auto Rotate Home Screen
This next option applies to all of three of the phones in the Galaxy S22 lineup, as Samsung makes it possible for your home screen to automatically rotate. If you’re coming from a non-Galaxy phone, it can be a bit jarring to see your home screen in landscape mode. Plus, there’s the possibility that any of your home screen widgets could be affected and won’t look nearly as good. Here’s how you can enable or disable the ability to have your home screen automatically rotate.
Open the Settings app on your Galaxy S22.
Scroll down and tap Home screen.
Scroll down until you reach Rotate to landscape mode.
Tap the toggle to turn the feature on or off.
With this feature enabled, you can turn your phone into landscape mode and your home screen will follow suit. This may be better suited for those who are using their phone on a desk, watching a video, and want to be able to go to the home screen and not have to change the orientation when navigating the UI.Conclusion
Auto-rotate is one of those features that we often take for granted, and Samsung takes things a step further with the ability to have your home screen rotate instead of just apps. It’s something that not even the iPhone 13 Pro Max is capable of with its massive 6.7-inch display, just giving Samsung phones one more reason to go with the Galaxy S22 over the iPhone. Let us know if you have any questions when it comes to enabling or disabling auto-rotate on your Galaxy S22!
Each new version of Office introduces new features, and they are rarely unanimously loved. Starting with Office 2007, Microsoft made the time editing counter more visible than it had been in previous versions of the software. Though a minor change, this counter runs in the background, so may not be accurate if the research is being done at the same time. This can lead to vastly inflated editing times, with thousands of minutes seemingly spent on a single document containing only a few hundred words. Not everyone is fond of this change, and disabling it is a convoluted process: there is no checkbox or option in the settings window to disable the counter.
It should be noted that, in Germany, this feature is disabled by default. Following these steps will make it possible to enable this functionality, even in Germany and other countries where the feature may be disabled due to privacy concerns or legislation.Disabling the Time Editing Counter
1. Close all running Office windows.
2. Press “Windows key + R” to bring up the Run prompt. Type “regedit” to bring up the Registry Editor (accept the UAC prompt, if one appears).
3. Navigate through the tree menus on the left-hand side, following this path:HKEY_CURRENT_USERSoftwareMicrosoftOffice
Note that depending on your version of Office, “15.0” will change. Office 2013 is identified as 15.0, Office 2010 as 14.0, and Office 2007 as 13.0. However, this does not affect the procedure.
6. Change the value to “1” if you wish to disable the counter, and “0” if you wish to enable it. There is no need to change the Base from Hexadecimal.
7. Open a document and check the time spent editing under the “File” button. It should either remain stuck at zero or increase, depending on the change made.Removing the ‘NoTrack’ Entry
Should you ever need to remove the modification, whether it was to enable or disable the timer, follow the steps below.
1. Open “regedit” through the same Run prompt as before.
2. Navigate through the folder tree and find the “CommonGeneral” folder under your version of Office.
Though the timer is hardly a major feature in Office, it is still one that has been given greater prominence in the latest versions of the software. Whether you view that as a good or bad thing, this relatively straightforward registry tweak will allow the software to better suit your individual tastes.
Paul is a Northern Irish tech enthusiast who can normally be found tinkering with Windows software or playing games.
Subscribe to our newsletter!
Our latest tutorials delivered straight to your inbox
Sign up for all newsletters.
How to disable ‘Did you mean to switch apps’ in Windows 10
If you select “Yes”, your browser will switch to File Explorer but you’ll get the same prompt each and every time Edge needs to switch to another app. On the other hand, if you select “No”, the message disappears and this prevents switching apps. There is no option on the prompt window to prevent it from being shown in the future, so it will keep on popping up. Those who find it irritating may want to disable it, but there is no direct method to do so.How to disable Did you mean to switch apps message in Microsoft Edge?
Many users reported Did you mean to switch apps message on their PC. This issue can appear if your file associations aren’t properly configured. Speaking of this message, in this article we’re going to cover the following topics:
How to disable application switching in Windows 10 – This message can be quite annoying, but you should be able to disable it by making few changes in your registry. We wrote a detailed guide on how to do it, so be sure to check it out.
Microsoft Edge is trying to switch apps – This message is usually associated with Microsoft Edge, and if you ever encounter this message, you might have to set up a different default web browser.
Did you mean to switch apps Microsoft Edge – This issue most commonly appears in Edge, and if you encounter it, be sure to update Windows to the latest version and check if that solves the problem.Solution 1 – Change your registry
Now close the Registry Editor and restart your computer. You’re all done, after restarting and you won’t get the ‘Did you mean to switch apps’ prompt again.Solution 2 – Change your file associations
According to users, Did you mean to switch apps message can appear due to your file associations. However, you can fix the problem simply by setting different default apps. To do that on Windows 10, you just need to follow these steps:
Open the Settings app. You can do that quickly by pressing Windows Key + I.
This problem can also occur while trying to open a specific type of file. If that’s the case, you might be able to solve the problem simply by setting a default app for that file type. To do that, just do the following:
Open the Settings app and navigate to the Apps section.
In some rare cases, this message can appear while trying to use certain protocols. However, you should be able to fix that simply by repeating the steps above and selecting Choose default apps by protocol option. After doing that, you just need to set the default application for the desired protocols and the issue should be resolved.Solution 3 – Select Don’t ask me every time option
According to users, you might be able to fix this problem simply by choosing Don’t ask me every time option when asked to choose the default browser. Whenever you try to open a file with a non-default application, you might get this or a similar message. To fix the problem, simply select the application that you want to use and check Don’t ask me every time option.
Expert tip:Solution 4 – Try using Safe Mode
Once your PC restarts, the list of options will appear. Select any version of Safe Mode by pressing the corresponding key.
Once you enter Safe Mode, check if the problem still appears. If not, it means that the issue might be related to your user account or your settings.Solution 5 – Create a new user account
Sometimes this problem can appear due to issues with your user account. Sometimes your account can get corrupted or certain settings can interfere with your apps. However, you can fix the issue simply by creating a new user account. This is quite simple, and you can do it by following these steps:
Once you create a new account, you need to switch to it. After switching to a new account, check if the problem still persists. If not, it means that your previous account was corrupted or improperly configured. Now you just need to move your personal files to a new account and start using it instead of your old one.
If you’re constantly getting Did you mean to switch apps messages, the problem might be caused by the missing updates. Sometimes certain glitches or bugs can be present in Windows, and those glitches can lead to Did you mean to switch apps message. However, you can fix most of these problems simply by keeping Windows 10 up to date.
To make this process more simple, Windows 10 will automatically download the necessary updates. However, sometimes you might miss an automatic update due to certain bugs. On the other hand, you can always check for updates manually by doing the following:
If any updates are available, they will be downloaded automatically in the background. Once the updates are downloaded, you can install them simply by restarting your PC. After your PC is updated, this error message shouldn’t appear anymore.
Microsoft doesn’t provide a direct solution to solve the issue. They claim that since you are using multiple programs associated with protocol and file types, there is no option to turn off the pop-up message while opening a hyperlink (file extension). Some users have reported that it can also be switched off by tweaking the Internet Explorer settings. We do hope that the above procedure worked for you.Related stories you need to check out
Was this page helpful?
To disable showing the Favorites bar in the Microsoft Edge browser on a Windows 11/10 computer, you can use the following built-in options:
Windows Registry Editor
Local Group Policy Editor.
Before you use any of these options, we suggest you create a system restore point. If something goes wrong, you can easily restore your computer.1] Disable the Favorites bar in Microsoft Edge using Windows Registry Editor
The steps are as follows:
Open the Registry Editor
Go to the Microsoft key
Create an Edge key
Create a FavoritesBarEnabled value
Restart Microsoft Edge.
In the first step, open the Registry Editor window. To do this, type regedit in the Windows Search box and use the Enter key.
After this, go to the Microsoft key by following this path:HKEY_LOCAL_MACHINESOFTWAREPoliciesMicrosoft
In the Microsoft key, you have to create a Registry key. Once the new key is generated, rename that key to Edge.
At last, restart the Microsoft Edge browser. Now Favorites bar will be disabled completely and won’t be open using any option.
To enable the Favorites bar again in the Edge browser, you can use the steps mentioned above, and delete the Edge Registry key. Restart Microsoft Edge and you can show the Favorites bar once again.
Related: How to prevent changes to Favorites on Microsoft Edge on Windows 11/10.2] Disable showing Favorites bar in Edge browser using Local Group Policy Editor
In order to use this solution, you have to integrate Microsoft Edge with Local Group Policy Editor by downloading its Group Policy templates and adding Microsoft Edge templates to Group Policy Editor. Though Microsoft Edge settings are already there in Group Policy Editor, some settings are not present. Therefore, you need to add Microsoft Edge templates manually. When you have done that, you can follow these steps:
Open Local Group Policy Editor window
Select the Microsoft Edge folder
Access the Enable favorites bar setting
Select Disabled for that setting
Press the OK button.
Let’s check these steps in detail.
Type gpedit in the Search box and hit the Enter key. It will open the Local Group Policy Editor window.
Select the Microsoft Edge folder using the path mentioned below:
Close Microsoft Edge (if opened already) and launch it again. Now Favorites bar will not open in your Edge browser.
When you want to show or enable the Favorites bar in Microsoft Edge, you can use the steps listed above to access the Enable favorites bar setting. After accessing that setting, select the Not Configured option for it, and use the OK button.
Hope it helps.How do I make the favorites bar go away?
If you want to hide the Favorites bar in the Microsoft Edge browser, then the quickest way to do that is using the Ctrl+Shift+B hotkey. On the other hand, if you want to disable the Favorites bar in the Edge browser, then you can either use Windows Registry Editor or Local Group Policy Editor options. Both of these options are covered separately in this post. You can also enable the Favorites bar using the same options when you want to use it again.How do I disable Microsoft Edge Toolbar?
If you don’t want to see certain buttons (such as the Extensions button, Favorites button, Collections button, etc.) on the Microsoft Edge toolbar, then you can easily turn off such options. On the other hand, if you want to vanish or hide the Edge toolbar from showing, then you need to turn off all the options available for the Edge toolbar. For doing this, open the Settings page, and access the Appearance setting. There, access the Select which buttons to show on the toolbar section and use the toggle for the given options.
Read next: How to Show or Hide Bookmarks Bar in Google Chrome.
Update the detailed information about Enable Or Disable Adaptive Brightness In Windows 10 on the Hatcungthantuong.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!