Trending December 2023 # Fix Free Fire Network Connection Error The Right Way # Suggested January 2024 # Top 16 Popular

You are reading the article Fix Free Fire Network Connection Error The Right Way updated in December 2023 on the website We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested January 2024 Fix Free Fire Network Connection Error The Right Way

Free Fire is one of the most popular games along with PUBG and Fortnite. But this doesn’t mean that you can not stumble upon an error while using this app. As of late, a lot of gamers have reported that they are not able to play the game because of Network Connection Error. But not anymore, if you want to fix this error the right way, this is the article for you. We have accumulated reasons and solutions that would help you to fix the error.

Fix Free Fire Network Connection error

If you want to fix Free Fire Network Connection error the right way then start by updating your computer. Sometimes, just updating Windows can resolve the issue. Therefore, check for updates and see if the issue persists. If it does persist, then you need to follow the given solutions to resolve the issue.

Restart Free Fire and your computer

Check your Internet Connection

Check if Free Fire is down

Restart your Network Devices

Change your Network

Flush DNS cache

Now, let us talk about them in detail. Make sure to go through the solutions in the given order. This will save you a lot of time.

1] Restart Free Fire and your computer

Sometimes, the issue can be resolved by just restarting the Free Fire app. If that’s not working, then you can restart your computer and check if the issue persists. Restarting the computer disables all the services and apps that can interfere with your program. So, do that, and check if the issue persists.

2] Check your Internet Connection

Let us start by looking at the most obvious solutions of them all. If you are facing a network issue, check your Internet Connection. You can use an Internet Speed tester to know your bandwidth. If it’s low, check other devices connected to the same network and see if they are having similar bandwidth. If too are having problems with the Internet, restart your network devices and see if the issue is resolved. If not, contact your ISP.

3] Check if Free Fire is down

If your Internet Connection is on point and you are seeing the error, then you should try to check Free Fire Server status. If the server is down, all you can do is wait for the issue to be resolved. It usually doesn’t take long for the engineers to resolve the issue. Therefore, you need to wait for some time and retry creating a connection.

4] Restart your Network Devices

You should restart your Network Devices in order to resolve any network-related issue. To do that, unplug your Router and Modem, wait for a minute or two, plug them back in, turn them on, connect your computer to the network, open Free Fire, and check if the issue persists. This is an easy fix that you can deploy to resolve all network-related issues.

5] Change your Network

According to some users, changing the Network has helped them in resolving the issue. So, if you are using WiFi, try switching to Mobile Data and vice-versa for Mobile Data users. You can also switch to 2.4 GHz WiFi if you are on 5 GHz, and vice-versa. This can resolve the issue for you.

6] Flush DNS cache

Next up, try flushing DNS Cache to resolve the issue. You just need to just execute some commands and you will be good to go.

So, open Command Prompt as an administrator and execute the following commands.

ipconfig /flushdns

Now, restart your computer and check if the issue persists.

Hopefully, you are able to resolve the issue with the solutions mentioned in this article.

How much MBPS is good for Free Fire?

You need to have a good Internet Connection in order to play Free Fire. However, the MBPS requirement is high, your Internet speed should be anywhere between 1-2 MB per second and you will be good to go. Also, make sure that your Internet is not fluctuating. That’s why it is always recommended to go for an Ethernet connection as Wi-Fi can be a bit unreliable.

Free Fire System Requirements

If you want to run Free Fire on a PC, you need to make sure that you are meeting the system requirements given below.

Minimum System Requirements

Operating system: Windows 7 or above (32 and 64bit)

Processor: Dual-core processor with at least 2GHz frequency


Graphics: Intel HD Graphics 3000 (requires DirectX 11 compatible card).

Storage: 4 GB of free space

Recommended System Requirements

Operating system: Windows 7 or above (32 and 64bit)

Processor: Intel Core i5-680 / AMD FX 6300 – it’s recommended to enable the processor’s virtualization feature


Graphics: Intel HD Graphics 5200 (requires DirectX 11 compatible card).

Storage: 4 GB of free space

You need to make sure that you are meeting the mentioned requirements, otherwise, the game will crash on your system.

Read Next: How to enable and use Game Mode in Windows 11/10.

You're reading Fix Free Fire Network Connection Error The Right Way

Fix Zoom Error Code 1132 The Right Way

Some users cannot join meetings on Zoom because of the error code 1132. Whenever they open Zoom and join a meeting, the error code 1132 pops out and prevents them from joining the meeting. Some affected users tried restarting their systems, but the error did not resolve. In this article, we will see some effective solutions to fix Zoom Error code 1132 1132.

Fix Zoom Error code 1132

One of the causes of Zoom error code 1132 is a poor internet connection. Unstable internet connections always cause issues. Hence, before trying the fixes mentioned below, check your internet connection. We also suggest you restart your computer and see if it helps. If these tips do not help, use the solutions below to resolve the issue.

Power-cycle your router

Check for Zoom updates

Temporarily disable your antivirus and firewall

Join Zoom meetings in your web browser

Create a new user account

Uninstall and reinstall Zoom

1] Power-cycle your router

It will be better if you power-cycle your router. The following steps will guide you on this:

Turn off your router.

Unplug cables from the wall socket.

Wait for a few minutes.

Plug cables into the wall socket again and turn on your router.

You can also try connecting your system to the internet via an ethernet cable. Wired connections have less packet loss as compared to wireless connections. Therefore, wired internet connections are more stable than wireless ones.

2] Check for Zoom updates

If you are using an outdated version of Zoom, you may experience several issues like this one. This is because of bugs in older versions. Users are always suggested to use the latest version of the software because newer versions released by developers come with bug fixes.

The following steps will help you check for updates for Zoom Client.

Open Zoom Client.

Sign in to your account.

After updating the Zoom Client to the latest version, join a meeting and see if you get the same error code this time. If yes, try the next solution.

3] Temporarily disable your antivirus and firewall

If your antivirus and firewall are blocking Zoom from establishing a connection successfully. You can check this by temporarily blocking your antivirus and firewall. After doing this, open Zoom Client and see if you can join the meeting or not. If yes, your antivirus and firewall are the culprits. Now, you have to add Zoom Client as an exception to your antivirus and allow it through your firewall.

Some users were able to fix the issue by resetting firewall settings to default. You can also try this.

4] Join Zoom meetings in your web browser

Now, you have to enter your meeting details in the required fields to join the meeting. Also, you have to allow Zoom in your web browser to access your camera and microphone.

5] Create a new user account

In some cases, the problem is associated with a particular user account. We suggest you create a new user account on Windows 11/10 and see if it fixes the issue. Some affected users have reported that they were able to join the meeting through Zoom Client in another user profile on Windows 11/10. Maybe it will work for you too.

6] Uninstall and reinstall Zoom

After uninstalling Zoom, restart your computer. Now, download the latest version from its official website and install it again.

Read: How to reduce Zoom High CPU Usage.

How do I get rid of error code 1132 Zoom?

Zoom displays errors when it is unable to establish a connection to the server. According to the feedback of users, error code 1132 mostly occurs while joining a meeting via the Zoom Client. If you see this error, try to join the meeting in your browser and see if it helps. We have explained some helpful solutions in this article to fix this issue.

How do I fix Zoom connection error?

If Zoom keeps saying error or specifically, the Connection error, check your internet connection. An unstable internet connection creates issues for Zoom to communicate with the server due to which users experience errors on Zoom Client. Different error codes on Zoom occur due to different reasons. Hence, if you see an error on Zoom, you have to troubleshoot it accordingly to resolve the problem.

Read next: Fix Zoom Error Code 103033 on Windows PC.

Fix Ubisoft Connect High Cpu Usage The Right Way

Is Ubisoft Connect taking a high CPU usage on your Windows  PC? Ubisoft Connect is a popular game launcher for Windows PC to play a variety of Ubisoft games. Many users have reported that the Ubisoft Connect app consumes a high CPU usage on their PC. This results in the deterioration of overall system performance and other apps and games. Hence, it becomes crucial to fix the problem.

Now, you might be experiencing the issue at hand due to several reasons. It could be caused if your Ubisoft Connect app is not updated or if there is a virus present on your computer that is triggering the issue at hand. A corrupted installation of the app can be another reason causing the high CPU usage of Ubisoft Connect.

Some of the affected users experienced the issue at hand right after enabling the overlay option. In that case, the official support team has recommended disabling the in-game overlay on Ubisoft Connect to fix the problem.

If you are also experiencing the same problem and want to get rid of it, this post will help you. Here, we will be discussing different fixes that will resolve the problem of Ubisoft Connect’s high CPU usage.

Fix Ubisoft Connect High CPU Usage ton Windows PC

To fix the issue of high CPU usage of Ubisoft Connect on your Windows PC, you can use the below solutions:

Reboot your computer.

Run Ubisoft Connect as an administrator.

Disable Ubisoft Connect Overlay.

Make sure that the Ubisoft Connect app is up-to-date.

Perform a virus scan on your PC.

Set the priority of Ubisoft Connect to Low.

Reinstall Ubisoft Connect.

1] Reboot your computer

Restarting your PC seems like an effective fix to resolve the issue at hand. It will clear the memory and eliminate all the temporary issues which might be causing high CPU usage of Ubisoft Connect. So, if the issue is triggered due to a temporary glitch in your system, rebooting would fix it. Simply restart your computer and then open Ubisoft Connect to check whether it still takes high CPU usage or not. If yes, you can move on to the below fixes to resolve the problem.

2] Run Ubisoft Connect as an administrator

Here is how you can run Ubisoft Connect with admin privileges always on Windows 11/10:

Firstly, close the Ubisoft Connect app completely using Task Manager.

Now, from the appeared context menu, select the Properties option and go to the Compatibility tab in the Properties window.

Next, tick the Run this program as an administrator checkbox under the Settings section.

If the problem remains the same, you can move on to the next potential fix to resolve the issue of high CPU usage of Ubisoft Connect.

3] Disable Ubisoft Connect Overlay

As per several user reports, the high CPU usage of Ubisoft Connect occurs after enabling the overlay feature. Hence, it is recommended to disable the Ubisoft Connect overlay and then see if the problem is fixed or not. Here are the steps to do so:

 Firstly, go to the Ubisoft Connect app and ensure that you have logged in with your Ubisoft account.

Next, tap on the three-bar menu button present in the top left corner.

Now, choose the Settings option from the appeared options.

After that, navigate to the General tab and disable the Enable in-game overlay for supported games option by unchecking the checkbox.

Finally, restart the Ubisoft Connect PC application and check if the app still consumes a high CPU usage or not.

If the problem is still the same, try the next potential solution to get rid of the issue at hand.

4] Make sure that the Ubisoft Connect app is up-to-date

You might be dealing with the issue at hand if you are using an old version of the Ubisoft Connect app. There might be a bug in the app which is why it is taking high CPU usage. The developers keep releasing new updates to address previous bugs and improve app stability. Hence, it is always recommended to keep your apps up-to-date. So, update the Ubisoft Connect app to its most recent version and see if the problem is fixed or not.

You can download the latest version of the app from its official website. And, then install it on your PC to update the existing Ubisoft Connect app. After that, launch the app and see if the high CPU usage of Ubisoft Connect is fixed or not.

Read: A Ubisoft service is currently unavailable on Windows.

5] Perform a virus scan on your PC

If none of the above solutions worked for you, try running a virus scan on your Windows PC. There might be some malware or virus which is causing the issue at hand. So, running a virus and eliminating or quarantining potential threats and viruses might help you fix the issue. Open your antivirus software and run a Quick scan to identify existing viruses or threats on your computer. Once the scan is done, you can remove or quarantine identified threats. After that, reboot your computer and run Ubisoft Connect to check if the problem is fixed or not. If not, try the next potential fix.

6] Set the priority of Ubisoft Connect to Low

The next thing you can do is set the priority for Ubisoft Connect to low and then check if the problem is resolved or not. It is a workaround if you want to reduce the CPU usage of Ubisoft Connect and free up some system resources for other applications and games. You can use the Task Manager app to do so. Here’s how to do that:

Firstly, press the Ctrl + Shift + Esc hotkey to open your Task Manager app.

Once done, reboot your PC and launch Ubisoft Connect to check if the problem is fixed or not.

See: Unable to start the game on Ubisoft Connect.

7] Reinstall Ubisoft Connect

The last resort to fix the issue is to reinstall the Ubisoft Connect app on your PC. It is a known fact that corrupted or infected installation of an app or game triggers issues like high CPU usage. Hence, if the scenario is applicable, reinstall a clean version of Ubsifot Connect and see if the problem is resolved.

To reinstall the app, first, uninstall the Ubisoft Connect app from your PC. Here are the steps to do so:

First, open Task Manager and close all the processes related to Ubisoft Connect.

Then, go to the installation directory of Ubisoft Connect on your PC and create a backup of the savegames folder.

After that, select the Uninstall option and follow the prompted instructions to remove Ubisoft Connect from your computer.

Once done, make sure to remove the residual and leftover files of the app to completely uninstall the app.

Finally, reboot your PC and download the latest version of Ubisoft Connect from its official website. You can then install the app again and see if the problem is resolved or not.

Hopefully, the Ubisoft Connect app will run smoothly now without excessive CPU usage.

Now read: Fix Ubisoft Connect app not working on Windows PC.

How do I fix 100 CPU usage Rainbow Six Siege?

If Rainbow Six Seige is taking excessive CPU usage, try lowering your graphics settings and see if the problem is resolved. You can also use some other fixes like restarting your computer, launching Rainbow Six Siege as an administrator, running a virus scan, updating the game, etc. If nothing works, you can reinstall the Rainbow Six Siege game to fix the problem.

How do I get rid of Ubisoft Connect CPU below?

To get rid of Ubisoft Connect, you can follow the seventh solution mentioned in this article. In other words, you can use in-built application uninstaller included in the Windows Settings. Apart from that, you can use third-party software uninstaller tools as well.

Tune Your Table Saw Up The Right Way

A table saw is one of the most useful and versatile tools in any workshop. A good one makes straight cuts fast and easy, and if you venture into building or buying jigs, you can cut joinery, straighten board edges, and even cut coves in boards. But like any tool, table saws require routine maintenance. Over time, parts of your saw may start to drift out of alignment, and those straight lines and right angles you’ve taken for granted will become less so. 

Fortunately, a return to square is a relatively quick process and requires only a few tools. In about an hour, you can get your table saw back to—or better than—factory quality.

But before we get into the specifics of exactly how to tune up a table saw, I’ll note that I have the Dewalt 7491RS job site table saw, so all of my specifics are based on that tool. Most saws have similar adjustments, but check your manual if you have any questions about your saw.


Time: about an hour

Material cost: $25 to $50

Difficulty: Easy

Materials Instructions

1. Unplug your saw. A plugged-in table saw is a dangerous table saw. Never work on your saw, or any tool, while it has any connection to power. You don’t want to risk an electric shock or accidentally turning the saw on when your hands are in the danger zone. 

2. Remove the throat plate and blade. First, raise the blade as high as it will go, and then remove the throat plate. This is the piece the blade juts out of, and there should be a locking screw holding the plate in place. Simply unlock the screw and pull it up. Then loosen and remove the arbor nut to take off the blade, using the wrenches that came with your saw.

Note: The arbor nut holds the blade in place, and you may have to turn it right instead of left to get it off. This type of reverse threading keeps it tight while the blade spins.

3. Clean the arbor and surrounding gears. Sawdust collects just about everywhere in a table saw, and can impede performance over time. Using a brush, compressed air, and a shop vac, clean all of the sawdust out of the arbor (the shaft that holds the blade), arbor nut, and drive gears. On many saws, you can reach these from the top, but you may get better access by crawling underneath. If you’re feeling motivated, or your saw is particularly dirty, you can take off the motor and belts to more thoroughly clean around them. If you do remove any belts or drive systems, take at least one photo beforehand so you have a reference for how to put it all back together. 

Pro tip: If you have areas with stubborn pitch or residue, try using mineral spirits as a cleaning agent. 

4. Lubricate the arbor and gears. Once these areas are sawdust-free, lubricate them liberally, per your manufacturer’s instructions. I use a spray-on “dry” lubricant. Then reinstall the blade and throat plate.

5. Clean and lubricate the other gears. Once the engine and drive gears are clean, move on to the ones that control the height of the blade, as well as those that let you adjust your fence, if applicable. Scrub them free of any sawdust and residue with your brush, air compressor, and mineral spirits as needed. Once they’re clean and moving easily, lubricate them, working the gears back and forth to ensure that all of the teeth are well coated. 

[Related: Up your table saw game by building this floating key organizer]

6. Set the blade to 90 degrees. Getting a perfect right angle between your tabletop and saw blade is the most important adjustment you can make. Cuts made at more or less than 90 degrees won’t fit tightly together, and can result in projects that are all but impossible to square up. Fortunately, this is a relatively easy fix. 

The best way to check your blade alignment is with a digital angle gauge. Simply place the gauge on your tabletop and zero it. Then hold the gauge against the fully-raised saw blade, avoiding any of the teeth if possible. The gauge will display the angle of your blade in relation to the tabletop. 

If you don’t have a digital angle gauge, you can use a speed square. Set the flat of the square against the tabletop and press the other edge against the blade. If you can see daylight between the two at the top or bottom, you don’t have a 90-degree angle. 

7. Adjust the bevel stops, if you have them. Many table saws have bevel stops, which are pieces of metal that allow you to push the bevel adjustment all the way to one side for 90 degrees, and all the way to the other side for 45 degrees. If your saw has these, adjust them now. On mine, this is as simple as using an allen wrench to turn an oval-shaped piece of metal until it touches the bevel arm in the 90-degree position. Then I move the blade to 45 degrees, checking with my angle gauge, and set the 45-degree bevel stop. This allows me to quickly position the blade at 90 and 45 degrees, the two most common angles, without having to look and micro-adjust. 

8. Square the blade to the miter slot. The next most important adjustment on your table saw is aligning the blade and fence to the miter slot to ensure that you’re getting square rip cuts as well as bevels. Checking the alignment is straightforward with a combination square. Press the flat of the square to the edge of the miter slot, and then extend the ruler until it touches one of the teeth of the blade on the infeed side. Slowly spin the blade so that the same tooth is on the far outfeed side, and check the distance with the combination square there. The blade is properly aligned when the combination square touches the tooth in both positions. If the ruler touches the tooth in one location, but there is a gap at the other, or it pushes the combination square away from the miter slot, your blade needs adjustment.

On my saw, there are two hex-head screws below the outfeed side of the table. If yours does too, or has something similar, loosen them slightly with an allen wrench or appropriate tool, allowing the blade box to move left and right. Move the edge of the blade box toward the miter slot if there is space between the ruler and blade, or away if the ruler is pressing into the blade. Repeat your alignment check and adjustments numerous times until the end of the ruler touches the tooth on both the infeed and outfeed side. Then lock the screws back into place.

Note: If you have a saw that doesn’t have miter slots, you can align your blade to your fence using the same technique. Just press the flat of the square against the blade and the end of the ruler against the fence. And you should also probably consider upgrading your saw—miter slots are invaluable.

9. Square the fence to the miter slot. Squaring the fence to the miter slot follows the same basic process as the blade. Press the flat of the combination square into the miter slot on the infeed side of the table, and then extend the ruler until it’s just touching the fence. Then slide the square to the outfeed side of the table. Lower the blade if you need to get it out the way. The ruler should touch the fence the entire length. If it doesn’t, the miter slot and fence are not square.  

Adjust the fence by loosening one of its mounting hex screws on the infeed or outfeed side and bumping the fence over by hand as needed. Check and adjust as many times as you need to for a perfect alignment.

10. Recheck everything. Sometimes when you’re adjusting one element, another moves. Before you call it a job well done, recheck all of your alignments, and check that the blade and fence are actually parallel to one another. Readjust your blade and fence as needed. 

11. Wax the tabletop. This is the final step and will both protect the table top and allow the wood you cut to slide more smoothly over the surface. Using a clean rag, apply a thin layer of paste wax to the table top and working edge of the fence. Let the wax rest for 10 to 15 minutes, then buff it out until the entire surface is smooth. 

When you’re done, plug the saw back in and turn it on. Listen for any strange noises and look for wobbling in the blade. I always let my saw run for a full minute or more after I’ve worked on it before running any wood through to make sure that I put everything back together properly. 

When you’re sure it’s all running as it should, get back to cutting! There’s nothing prettier in all of woodworking than a crisp right angle hot off the saw. 

Update, January 25, 2023: A previous version of this story suggested squaring the blade to the fence. While this is possible and may be your only option if your saw doesn’t have a miter slot, squaring both the blade and fence to the miter slot is a more accurate and consistent measurement.

Affiliate Link Building: How To Do It The Right Way

Affiliate link building is like commissioned sales for the 21st century.

The concept is simple: With an affiliate marketing program, brands and businesses select leading influencers to promote a service or product by using a unique affiliate link.

3 Benefits of Affiliate Link Building

Affiliate marketing is an effective way to gain exposure, drive traffic, boost conversions, and increase sales.

Let’s take a look at the three main reasons your business should be using affiliate link building strategies.

1. Easy Tracking

Affiliate marketing tracking software monitors the affiliate program and tracks links. When your company joins an affiliate network, the network’s program tracks the numbers for you.

Being able to track the effectiveness of each campaign or influencer is an essential part of an effective affiliate marketing strategy.

Some affiliate marketing programs provide detailed reports based on different marketing tools used, such as text links or banners.

2. Targeted Ads

If your business is running an in-house affiliate program, you have the freedom to accept influencers to join your program based on their reach and relevance.

When your business is partnered with an influencer through an affiliate network, there are steps in place to ensure that the influencer will reach your target audience through their content.

3. Cost-Effectiveness

Affiliate link building can boost conversions and increase sales with minimum effort and investment.

When setting your business’s marketing budget, consider these four costs for affiliate marketing:


Will you be running an in-house program, or joining an affiliate network?

It gives your business full control over every aspect of the affiliate program and enables you to communicate directly with your influencers.

Joining an affiliate network is much cheaper to begin with, but might not be as cost-effective in the long run, since the network itself does take a fee.

This means a lot of the initial work is done for you, including selecting influencers, tracking, reports, and even issuing payments.


Whether you choose to run an in-house program or join a network, your affiliate marketing program will require creatives.

That is, graphics and images for banners, copy for text links, videos and flash content, and any other tools that your influencers may use to promote your service or product.

Product Feeds or Landing Pages

If you’re running an in-house program, provide a detailed product feed to your influencers, including product names and descriptions, prices, categories, and creatives associated with the product.

The product feed serves as a resource for influencers when they’re preparing a new campaign.

If your business is selling a service or has a limited number of products, another option is to set up a unique landing page for each influencer.

Program Management & Compensation

Your business will need to hire an Affiliate Marketing Manager to:

Recruit and onboard influencers.

Create and monitor rules and policies.

Communicate with affiliates (or with the network).

Regularly update and optimize the affiliate program.

And more.

And you’ll need to compensate your influencers!

Keep in mind that if the commission rate is too low, many influencers may opt-out.

How to Start Affiliate Link Building (Correctly)

Keep in mind that like any other marketing tactic, there’s a right way – and a wrong way – to start affiliate marketing.

Now that you understand why your business should be using affiliate link building strategies, let’s take a look at how to implement affiliate link building strategies.

1. Have a Plan

Your first step is to get organized.

Implementing any new marketing strategy without a plan of action is a recipe for disaster, and it isn’t any different for an affiliate marketing strategy.

Plan your budget, decide which platform you’ll use, determine how you’ll select influencers, and set your commission rates.

Create a timeline and a content calendar, design your creatives, and watch your competitors. The time you put into planning your strategy is invaluable and will set you up for success.

2. Communicate Consistently

Your Affiliate Marketing Manager should be an expert communicator.

They need to:

Be willing to reach out to your influencers personally.

Always keep your influencers updated on new products or campaigns.

Provide current copy and creatives.

Many companies use forums or private Facebook groups to communicate with their influencers.

3. Build Relationships

The Affiliate Marketing Manager needs to be willing to assist your influencers and provide support when needed.

Asking your affiliates questions and sending polls to request feedback will let them know that your business can be trusted, you’re listening, and you want to work with them.

When you begin affiliate marketing, your influencers are partnering with you. Their voice is your asset.

4. Be Open to Change

Monitoring and checking numbers and metrics is crucial to the success of an affiliate marketing program.

You need to be able to understand what works and what doesn’t, and you’ll have to make decisions based on new information about your KPIs and ROI.

Follow each campaign with a keen eye. Run some A/B tests with different campaigns and different influencers.

Using affiliate marketing doesn’t mean a business gets to sit back and watch while their numbers increase. Get involved and be open to making changes to your strategy.

It’s Time to Build Your Affiliate Marketing Strategy

Affiliate link building is a growing and ever-evolving channel of marketing that more brands and businesses are integrating into their overall marketing strategies.

There’s a lot of freedom with affiliate marketing: you decide which strategies to implement – and which influencers you want to work with – for your content and exposure.

Affiliate link building is about performance marketing, with a focus on content that is going to reach your target audience naturally, benefiting both your business and your affiliates.


Timeframe: Month 8, then ongoing monthly

Results detected: 4-12 months

Average links per month: 30


Affiliate marketing platform

Affiliate marketing tracking software


Easy tracking

Targeted Ads


Image Credits

Uplay Connection Lost Issue – How To Fix?

Ubisoft has become very popular with its hundreds of games, spanning across multiple genres and generations of consoles.

You can choose to purchase games and download them with one of its popular game distribution services, Uplay.

But sometimes your days may get ruined when you come across problems like Uplay connection lost.

You might encounter this problem while opening the portal thus face problems while you connect to the Uplay servers on your version.

Through this article, we shall try to explore some ways to fix this annoying issue and render you smoother gaming experience.

Your firewall protection or the programs running in the background may create trouble.

Sometimes there may be corruption with the DNS cache files which may generate Uplay connection lost issue as well.

Besides, you need to check the proxy settings in case the game is not properly configured.

Let us now discuss about some viable solutions to tackle the problem. Have a look!

Sometimes your Firewall can create problem by blocking the connection of your Uplay. In case there is any software conflict you will face such issues like Uplay not working.

To resolve the problem, you may temporarily disable the Firewall protection service and hope this will enable you to solve the problem with your uplay connection.

Step 1: Open your Settings and then select the Update And Security window.

Step 2: Now from the given options choose Windows Security. Now select the Firewall And Network Protection Service.

Next choose your network and disable Firewall. Now check if this has solved your problem. 

You may have been using some antivirus programs for your protection. Even these can create problem with your uplay connection. So, try configuring these applications properly to enable Uplay run smoothly using your local connection.

For further protection it is recommended to shut down the Internet Connection Sharing programs (ICS) and VPN, since any of these may also interfere with your games.

If you failed to connect to Uplay, check the configuration. Sometimes the Uplay may be configured to start offline each time you tend to open it.

The proxy settings on your Windows 10 may also create connection issues for Uplay.

Follow the below mentioned steps to solve the problem:

Step 1: Launch your Uplay. Then from the top right side, hit on the Menu icon.

Step 2: Now from the displayed options choose Settings. Now select Always Start Uplay In Offline Mode and uncheck the option.

Step 3: Now check the Proxy Settings options in case there are some problems with its configuration. Minutely check the configuration and make changes if needed.

Some background applications may be corrupted which generates Uplay not working issue.

So, here I recommend you that before starting any game from Uplay, close all the apps running in the background to ensure that those should not create any trouble while gaming.

Try closing all the background apps and check whether this helps to solve the problem.

Step 1: Open the Settings and then go to the Privacy window.

Now, select the Background Apps option as shown in the picture below.

Step 2: Next navigate for Choose Which Apps Can Run In The Background option.  Then proceed by turning off the toggle switch for all the applications.

This will disable all the apps running in the background.  Close the window and then launch your game.

When you turn off the background apps it will give you a smooth gaming experience.

If you find that this solves your Uplay oriented problem, then make sure one of the apps was preventing internet access to your gaming servers.

It is especially important to flush DNS as they keep the IP addresses of the servers that you have recently visited.

So, flushing the DNS cache is an effective solution as these files may be somewhat corrupted and cause problem with your internet connection.

Follow the steps mentioned below top accomplish the task:

Step 1: Go to your Windows start option and enter CMD there to open Command prompt.

Step 2: When you get into the Command prompt window, enter:

ipconfig /flushdns in the given window.

Step 3: Then hit the enter key. Now you will get a message that the flushing procedure has been completed as I have shown in the picture below.

These instructions are viable only for your Windows 10. After you have successfully done the steps check whether this has checked the issue.

Your Windows uses the host files for mapping the IP addresses for hosting names.

So, you need to check this out and do some resetting. Here is a full guide for resetting the host files:

Step 1: First of all, you need to download the default host file and then extract it and copy the same to:

C: WindowsSystem32driversetc

Step 2: Then hit the replace button. After this in case there is any problem with your host files, it will resolve the issue.

This is a quite common solution in case you have any connectivity issues with your Uplay.

This is perhaps the last suggestion that I may give you in case you could not find any answer to Uplay not connecting issues.

Hope this article has helped you to seek the best solution when you encounter the Uplay connection lost.

If you have any more ideas or suggestions related to this topic, please feel free to use the dedicated section below.

You can also shoot us a mail if you have any further queries. We always look forward to hearing from you.

Update the detailed information about Fix Free Fire Network Connection Error The Right Way on the website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!