You are reading the article Fix Repeated “Your Message Could Not Be Sent” Messages Error On Mac updated in November 2023 on the website Hatcungthantuong.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested December 2023 Fix Repeated “Your Message Could Not Be Sent” Messages Error On Mac
Mac users may encounter a pop-up error originating from the Messages app in Mac OS which informs them “your message could not be sent”. Often when this error dialog appears, it’s seemingly out of nowhere or when a Mac wakes from sleep or has rebooted.
While it’s possible to encounter the “your message could not be sent” error for legitimate sending failures, or because iCloud or iMessage is down (very rare), it’s also possible the error can appear due to a syncing issue in which case there is nothing to adjust, and the solution in that case is a bit goofy.
The full text of the error you might see, as well as the three options is: “There was an error sending the previous message. Would you like to send it again? Ignore – Open Messages – Resend Message” You can choose ignore, and the error likely comes right back immediately. You can choose Open Messages, and you will also usually see the same error again. If you choose “Resend Message” if there wasn’t a failed message, you may end up re-sending an old message, or nothing may happen at all. Clear as mud, right? Anyway since this is a bit of a nuisance, here is what you should do if you experience this on a Mac.1: Check iMessage & iCloud Settings
Before anything else, make sure iMessage settings and iCloud are enabled as expected on the Mac. It’s possible to encounter this error message when an iMessage or text message has actually failed to send from the Mac, in which case you can almost always resolve the issue by double-checking Messages app preferences and making sure the Mac is configured to send messages, text messages, and has iCloud enabled and logged in.
Check the Apple ID / “iCloud” system preference panel and make sure iCloud and Messages are enabled and logged in as expected.
From the Messages app, pull down the “Messages” window and choose Preferences, and make sure account settings are configured and enabled as expected.2: The Repeatedly Cilck “Ignore” Solution
Yes, it’s just as dumb as it sounds! If you continuously encounter the “Your message could not be sent” error when turning a Mac on after it has been off for a while, or waking a Mac from sleep after it has been asleep for a while, the error could be due to a curious syncing issue with the Messages app, and not an actual message send failure. The solution in this case is to repeatedly ignore the dialog window, which seems to reappear for about the total number of messages which need to sync with another iOS device or Mac using the same Apple ID.
Eventually, the error message goes away, presumably because all of the unsynced iMessages will have synced properly between all same-Apple ID Apple devices and things will work again as expected.3: Make Sure Text Forwarding is Enabled on iPhone
You can often remedy message issues on the Mac, by turning to your iPhone. Say what? This is because the Mac relies on the iPhone to relay text messages, so we need to make sure this feature is enabled.
Try to send the message again, it should go through just fine.
You're reading Fix Repeated “Your Message Could Not Be Sent” Messages Error On Mac
Some Mac users have discovered they are unable to open some applications downloaded from the Mac App Store. When attempting to open an impacted app in Mac OS, a message stating “Name.app is damaged and can’t be opened. Delete chúng tôi and download it again from the App Store.” Another variation is a pop-up window appearing asking a user to “Sign in to use this application on this computer” requesting an Apple ID and password.
The reason these app can’t be opened error messages are appearing may be because of a code signing security certificate expired, in which case this is not user error or anything to do with user involvement, it’s basically something with DRM that was messed up on the Mac App Store side but is now impacting some applications that were downloaded from there. Sometimes it can also be the result of a fluke issue when downloading an app from the App Store. Yes, this is a strange and frustrating error message, but it’s easily resolvable.Resolving the “App is damaged and can’t be opened” Error in Mac OS X
This error message tends to appear in new versions of Mac OS X:
Reboot the Mac, this alone may be sufficient to fix the problematic apps and remove the error message
If a reboot does not fix the app, delete the application (just drag it to the Trash and empty), then re-launch the Mac App Store and download the app again via the Purchases tab or by searching for the app manually
Open the once impacted apps again, they should now work fineMethod 2: Fixing “App is damaged and can’t be opened” Error on Mac App Launch
If the above approach does not work, you may need to include a few additional steps:
Delete the app in question from the Mac
Log out of the Mac App Store
Restart the Mac
Upon reboot, open the Mac App Store and log in to the App Store again
Re-Download the app in question
This “App is damaged and can’t be opened” error message occasionally happens even in modern macOS releases like macOS Big Sur. Fortunately, deleting the app, rebooting, and re-downloading it again usually resolves the issue quickly.Resolving the “Sign in to use this application on this computer” Error in Mac OS X
Another variation of this error message may appear in older versions of Mac OS X:
Close the “sign in to use this application” error dialog box when you see it, and reboot the Mac instead
Upon reboot, open the Mac App Store and log in to your Apple ID to re-authenticate the Mac and all related apps
Open the apps as usual
That should be all that is required to get your apps working again in OS X.The Quick App Error Fix for Advanced Mac Users: Killing a Process
You can target the storeaccountd processes via Activity Monitor if you want, or use the command line if you are comfortable with the Terminal:
sudo killall -v storeaccountd
There are typically two “storeaccountd” processes running, one as user, and one as root, and thus using killall on both is sufficient to resolve the issue.
Those interested in learning a bit more about the technical details behind these error messages can refer to this Twitter thread, which reveals the certificate that expired and speculates on various contributing factors.
— Paul Haddad (@tapbot_paul) November 12, 2023
Obviously if you haven’t seen these error messages on your Mac, you have nothing to worry about, and can go about your merry way. But, should you see them, at least know it’s a simple fix, the apps aren’t actually damaged, it was just an error on the Apple side of things with a quick remedy.
Note that you may sometimes see a similar but different error message stating the particular Mac “app is damaged and can’t be opened, you should move it to the Trash” which has a different potential set of solutions.
When you need to work on a project with others, you may need to use a specific tool. But did you know that you can collaborate right in the Messages app on iPhone, iPad, and Mac? You can share files, work on them together, see activity updates, and more. This guide shows you how to collaborate on all of these platforms in the Messages app.System and iCloud Requirements for Collaborating in Messages
Before you start using Messages to collaborate on a project, be sure you meet the following requirements:
You and your collaborators must use iMessage.
You and your collaborators need iOS 16 or later, iPadOS 16 or later, or macOS Ventura or later.
You must save the file you want to share on an accessible location, such as iCloud Drive.
You must have iCloud enabled for the app you plan to use, for instance, Pages, Notes, or Numbers.
For viewing, editing, or inviting others to a shared iCloud document, you must meet one of the following minimum requirements:
An iPhone or iPad running iOS 15 or iPadOS 15 or later with Pages, Numbers, or Keynote 12.2 or later.
A Mac running macOS Monterey or later with Pages, Numbers, or Keynote 12.2 or later.Features Unavailable for Collaborating on Shared Documents
The features mentioned below aren’t available when working together on a shared document in Pages, Numbers, and Keynote.
Creating, deleting, or reordering styles
Creating or editing custom cell formats
Dragging columns and rows between the body and headers of tables
Editing using Ruby in Asian languages
Replacing all font occurrences
Reducing the file size
If you want to make one of the above changes, you can stop sharing the document, make the edit, then reshare it.
For additional features that unavailable for each application, check out the Apple Support site.
Tip: use the Apple Freeform whiteboard app to brainstorm and visualize ideas.How to Collaborate in Messages on iPhone and iPad
To start working on a project together in Messages on iPhone or iPad, share the file from one of Apple’s applications, like Notes, Pages, Numbers, or Keynote. From there, you can discuss the project and view its activity in Messages. Follow the steps below to get started.How to Share a File on iPhone and iPad
To share the file to Messages, open the app, then follow these simple steps.
Tap the “Share” button in the top right.
In the drop-down box that appears at the top of the pop-up window, select the “Collaborate” button. If you choose the “Send Copy” option located further down the list, this only shares a copy of the file and doesn’t activate the collaboration features.
Tap “Only invited people can edit” to adjust document access and permissions.
Listed below are the following access and permission options. When you finished toggling these settings, select “Done” on the top right.
Who can access: choose either “Only invited people” to limit access to people you choose or “Anyone with link” to expand the access to anybody who has a link.
Permission: choose either “Can make changes” to allow collaborators to edit the file or “View only” to prevent edits and give read-only permission.
Allow others to invite: turn on this toggle if you want to allow collaborators to invite others to the file.
Choose one of your recent Messages conversations or start a new one by selecting “Messages” in the row of share options.
When the file appears in the text field of the Messages app, you can adjust the access and permission settings once more, if necessary, and add a message. Tap the blue “Send” button.How to View the File Activity in Messages on iPhone and iPad
When a collaborator makes a change to the file you’ve shared, you’ll see this activity in the Messages app. This is a great way to stay on top of edits without the need to open the file and check manually.
Open the project conversation in Messages to see whether changes were made to the file at the top of the conversation. You can also see who made the change and when they made it.
Tap “Show” or “Review” next to the activity to see the changes.How to Stop Collaborating on iPhone and iPad
When the project comes to an end or if you simply want to stop collaborating, use the sharing options in the corresponding app to remove access from the file. The exact steps vary depending on the app but are similar in those like Notes, Pages, and Numbers. For example, take a look at how to collaborate with the Notes app.
Open the app and tap the “Collaboration” icon. If collaborator(s) are active, the icon will feature their contact photo as shown below.
Select the “Manage Shared Note” menu option.
Choose the “Stop Sharing” button at the bottom.How to Collaborate in Messages on Mac
You can collaborate on shared files in Messages on Mac, similarly to sharing on your mobile device. Add the file to the Messages app directly or share it to Messages from the application you’re using.How to Share a File in Messages on Mac
As a Mac user, you probably how how easily you can perform actions with drag-and-drop. You can even use it to share a file to Messages by following the steps below.
Open the folder containing the file you want to share along with the project conversation in the Messages app. You can do this by placing the windows side by side.
Drag the file from its folder into the conversation in Messages and release.
When you see the file appear in the text field, use the drop-down box to select “Collaborate.” If you pick “Send Copy,” this only shares a copy of the file.
Optionally add a message to the text field below the file, then press Return to send the message.How to Share a File From Another App on Mac
If you’re actively working on the file, you may find it easier to share it from the app you’re using.
At the top of the pop-up window, select “Collaborate” in the drop-down menu.
Expand the drop-down menu beneath for “Only invited people can edit” to adjust the access and permission settings. You’ll see the same settings for “Who can access,” “Permissions,” and “Allow others to invite” that were offered in the mobile app. Choose the options you want.
Select one of your recent Messages conversations or start a new one by picking “Messages” in the list of share options.
When the file appears in the text field of the Messages app, optionally add a message, then press Return to send it.How to View the File Activity in Messages on Mac
If a collaborator makes a change to the file you’ve shared, you’ll see this in the Messages app just as you would on your mobile device.
Open the project conversation in Messages and look to the top for changes made to the file. You’ll see who made the edit and when.
Select “Show” or “Review” next to the activity description to open the file and see the changes.How to Stop Collaborating on Mac
If it’s time to stop collaborating, you’ll use the sharing options in the corresponding app to remove access from the file. Again, the exact steps vary depending on the app. Following, is an example using the Pages app:
Open the app and tap the “Collaboration” icon.
Select “Manage Shared Document.”
Choose “Stop Sharing” at the bottom.Frequently Asked Questions Can I add or remove collaborators in Messages?
You can add or remove people the same way you add or remove them from an ordinary group conversation in Messages.
Select the Details icon (small letter “i”) and choose “Add Member” to add someone new or select the person you want to remove and choose “Remove From Conversation.”
Visit the corresponding app to adjust the access and permissions as needed.Can I adjust the access and permissions after sharing a file?
Open the corresponding app per the type of file you shared. Select the Collaboration icon and choose “Only invited people can edit.” You’ll see the same options as when you initially set up the file for sharing.Can I use SharePlay to collaborate on projects in Messages?
SharePlay is a handy feature for watching videos and listening to music with friends and family in Messages and FaceTime on iPhone and iPad or FaceTime on Mac. You can use the SharePlay feature in apps like Music, TV, TikTok, and Spotify. However, there isn’t currently a SharePlay option in apps like Pages, Notes, or Numbers.
Image credit: Pixabay. All screenshots by Sandy Writtenhouse.
With her BS in Information Technology, Sandy worked for many years in the IT industry as a Project Manager, Department Manager, and PMO Lead. She wanted to help others learn how technology can enrich business and personal lives and has shared her suggestions and how-tos across thousands of articles.
Subscribe to our newsletter!
Our latest tutorials delivered straight to your inbox
Sign up for all newsletters.
If you’ve just recovered from a system crash, you might be told to check the Console for error messages. But what do those Console messages mean, and how can you interpret the logs to troubleshoot your Mac?What Is the Console?
Console is the application that collects log messages from your computer for user review. It collects errors, warnings and standard “here’s what I did” log messages from system and user applications. It’s a fantastic resource for troubleshooting. It should be your first stop after your computer experiences a random restart, kernel panic or application crash.Getting Acquainted with Console
When you first open Console, you’ll be confronted by a torrent of real-time log messages. Most of these are unimportant, mundane application reports describing what the application is doing at that moment. It’s not material that’s typically important for the user to know, but if you want to find it, that’s where it lives.
This will “freeze” Console messages at the current moment, but new messages will continue to come in at the bottom of the queue. You just won’t be auto-scrolled to them.
If you look at the search bar in the upper-right of the window, you’ll notice that Errors and Faults is really just a saved search. You can create your own searches by manipulating the search bar.Interpreting Console Messages to Troubleshoot Your Mac
The most important types of console messages are errors and faults, which we filtered for above.
These reports tell you when something has gone wrong in the world of your computer and may or may not require addressing. Faults, the most serious console message, get red dots, while errors, which are more like warning messages, get yellow dots.
The process column will tell you the name of the application or system process that sent the error. Some will be familiar, and others will be foreign to you. The most serious faults are typically spawned by the “kernel” process.Evaluating Individual Faults and Errors Conclusion: When Should I Check the Console?
Console is most useful when your system has just experienced an error. Maybe an application failed to open and you received a System Report window about it. Or maybe you just rebooted following a kernel panic. Inspecting the Console will help you dig up the cause of the problem and take the necessary steps to fix it.
Alexander Fox is a tech and science writer based in Philadelphia, PA with one cat, three Macs and more USB cables than he could ever use.
Subscribe to our newsletter!
Our latest tutorials delivered straight to your inbox
Sign up for all newsletters.
Fix: Chrome Was Not Found on Your System or is Not Supported Follow some quick steps to solve this browser error message
Developers have reported receiving the error message Browser: ‘Chrome’ was not found on your system in Cypress or Docker.
The error may occur because Cypress cannot locate the chúng tôi path if it’s not in the default folder.
Users can tell if their browser is not working if they are receiving errors in the command line in web application testing programs.
Try Opera One, a browser with various functionalities already built-in!
A flawless browser like Opera has most functions already under the hood.
Here’s what’s included by default:
Easy and intuitive workspace management
Ad-blocker mode integrated to load pages faster
WhatsApp and Facebook Messenger
Customizable Ul and AI-friendly
⇒ Get Opera One
If you’re a web developer, then you’re probably familiar with Cypress, a tool for testing modern applications for browsers. However, users have reported receiving the error message browser: ‘Chrome’ was not found on your system or is not supported by Cypress.
Using Docker to run Google Chrome is also a great way to use the browser without installing it onto your system. Running Chrome in a Docker container is also good for running tests for web applications.Why is Chrome not opening on my computer?
Usually, the error, browser: ‘Chrome’ was not found on your system occurs because the chúng tôi file is not installed in the default folder. If it’s located somewhere different, then Cypress will have difficulty locating it and thus will produce the error.
For those wondering if Cypress works with Chrome, the answer is Yes. Chrome, along with a few other browsers developed on the Chromium engine, are all supported by Cypress.
But remember, Cypress still doesn’t support all browsers, and you should verify that beforehand in order to avoid running into errors later.Quick tip:
Choosing the best browser can make all the difference when it comes to workflow, customizations and user data. We recommended Opera One because it offers a feature-packed interface and is one of the only browsers with a built-in VPN.
Also, this browser has been running on Google’s open source Chromium. This means you can install any web extension from Google’s massive library. The browser also comes with a native AI and social media integration.
Choose to navigate safely using this performing browser.
Free Download Visit websiteHow do I get Cypress to work on Chrome? 1. Create a symlink
Be sure to run Command Prompt as an administrator at that the C:Program FilesGoogleChrome file path exists before trying this step.2. Clear Cypress cache
Clearing the cache of Cypress will clear out any installed versions of the program on your PC. Like with any application, clearing the cache is a good way to get rid of any corrupt files and clutter. Be sure to run the command: npm install cypress –save-dev to install Cypress again.3. Run Chrome as an administrator 4. Reinstall Google Chrome
If nothing worked, it’s likely an issue with Google Chrome that only a reinstall could fix. And that, too, shouldn’t take more than 10-15 minutes. Once done, the Browser: ‘Chrome’ was not found on your system message should not appear in Cypress any more.How can you tell if your browser is not working?
Users can tell if their browser is not working if they get error messages like browser: ‘Chrome’ was not found on your system or is not supported by Cypress, or the message: Google Chrome not found on this system. These error messages appear in web application testing programs like Cypress or in Docker.
Hopefully, one of the above solutions helped fix the error browser: ‘Chrome’ was not found on your system.
If you’re having difficulties with Cypress failing to connect to Chrome, we also offer a guide for that.
Still experiencing issues?
Was this page helpful?
Start a conversation
Your computer displays a “Your organization’s data cannot be pasted here” error when you attempt to paste data across Office applications (Word, Excel, Outlook, etc.) without administrative authorization. Temporary software glitches on your computer or Office application can also trigger the error.
This tutorial covers five ways to fix issues causing the “Your organization’s data cannot be pasted here” error on Windows and Mac computers.
Table of Contents1. Modify the Intune Application Protection Policy
Companies use Microsoft Intune app protection policies to safeguard data on computers issued to employees. You’ll get the “Your organization’s data cannot be pasted here” error if your company’s Microsoft Intune policy settings restrict data transfer outside work applications.
If you have administrative access, modify your company’s Microsoft Intune protection policy to allow data transfer outside managed apps. Alternatively, create a new policy that allows data transfer between any application.
Note: Contact your administrator if you can’t access your company or organization’s Microsoft Intune dashboard.
Sign in to your company or organization’s Microsoft Intune dashboard.
option on the left sidebar and choose
App protection policies
Select an existing policy setting and head to the “Data Transfer” section. Next, set the “Restrict cut, copy, and paste between other apps” option to
If your company or organization has no app protection policy, select the Create policy option to make one.
to save changes to the protection policy settings.
Restart your computer if you still get the “Your organization’s data cannot be pasted here” error after disabling data transfer restrictions in Microsoft Intune.2. Reboot Your Computer
You might encounter problems copying or pasting data if your Office app is unresponsive or lagging. Closing the Office application and restarting your computer might resolve the issue.
Ensure you save or back up your file before closing your Office app or rebooting your computer, so you don’t lose unsaved work.Reboot Windows PC
Open the Start menu, select the Power icon, and select Restart.Reboot macOS Computer
Select the Apple icon on the menu bar and select Restart.3. Update the Microsoft Office Suite
Microsoft Office applications sometimes malfunction and throw error messages if they are buggy or out-of-date. Update your Microsoft Office applications and check if you can copy or paste export data across the apps.
Connect your computer to the internet (Wi-Fi or Ethernet) and follow the steps below to update your Office application.
Open the Office application and open the
on the Ribbon.
on the sidebar.
drop-down option and select
You’ll get another notification when the update is complete. Close the update client, reopen the Office application, and check if you can now copy and paste data.
You can also update Office Suite apps from the Microsoft Store. Refer to our tutorial on updating Microsoft Office apps for step-by-step instructions.4. Paste Into a Different File or Document
Sometimes, the “Your organization’s data cannot be pasted here” error is file-specific. Open a new file in the Office application and check if you can paste copied text.
If successful, the document/file you can’t paste into is likely corrupt. One way around this issue is to duplicate the problematic Office document and check if you can paste text in the duplicate copy.
Repair the document if the error persists. Refer to our tutorial on repairing damaged or corrupt Office documents for instructions.5. Enable Editing on the File
The first time you open a file downloaded from the internet in Office apps, the file opens in read-only mode. This mode is called the “Protected View,” a security feature that reduces the risk of damaged or potentially malicious files infecting your computer.
You can’t paste or modify texts in documents open in Protected View. Microsoft Office apps display a “PROTECTED VIEW” message below the ribbon when a file isn’t editable.
Select the Enable Editing button at the end of the message to allow modifications in the document.
Try pasting text in the document and check if disabling Protected View stops the “Your organization’s data cannot be pasted here” error. Check if you’re authorized to copy or paste data in the app if the error persists.Paste Your Organization’s Data Anywhere, Anytime
These troubleshooting methods can help you overcome limitations preventing you from pasting data in Office applications on your computer. Contact Microsoft Support, repair the Office application, or contact your company’s IT support department if the problem persists.
Update the detailed information about Fix Repeated “Your Message Could Not Be Sent” Messages Error On Mac on the Hatcungthantuong.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!