Trending March 2024 # How To Add Safe Mode To The Windows 8 Boot Menu # Suggested April 2024 # Top 12 Popular

You are reading the article How To Add Safe Mode To The Windows 8 Boot Menu updated in March 2024 on the website Hatcungthantuong.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested April 2024 How To Add Safe Mode To The Windows 8 Boot Menu

The Process

For this procedure, you’ll have to use the command line to try and figure out some environmental variables as well as use them within a command that can add the safe mode to your boot menu. All chit chat aside, let’s get to work:

1. Start by going into Metro and type “cmd“. The command line’s icon should show up on the left side.

4. Confirm that you want to run “cmd” in the UAC prompt that comes up when the computer switches you to the desktop.

5. Type

bcdedit

/

enum

/

v

in the command line. A load of information will show up. You’ll have to learn how to copy and paste a piece of it in the command line, which is something slightly different to copying and pasting in a desktop application environment.

7. Now, type

/

d Windows

8

(

Safe Mode

)

You can call it whatever you want if you want to be original, but you might risk not remembering what it’s there for if you don’t use it often.

8. Close the command line, go into Metro again, type “msconfig,” and press “Enter.”

9. Go into the “boot” tab and select the safe mode item.

Speaking of Internet, you can choose to repeat this process to add a separate “safe mode” with networking capabilities and call it “Safe Mode With Networking.” It’s up to you! Here’s the result of our (sort of) little tutorial:

Questions? Answers? Suggestions?

Miguel Leiva-Gomez

Miguel has been a business growth and technology expert for more than a decade and has written software for even longer. From his little castle in Romania, he presents cold and analytical perspectives to things that affect the tech world.

Subscribe to our newsletter!

Our latest tutorials delivered straight to your inbox

Sign up for all newsletters.

By signing up, you agree to our Privacy Policy and European users agree to the data transfer policy. We will not share your data and you can unsubscribe at any time.

You're reading How To Add Safe Mode To The Windows 8 Boot Menu

How To Add Task Manager Option In Taskbar Context Menu In Windows 11

In this tutorial, we will show you how to add the Task Manager option in the taskbar context menu in Windows 11. One of the convenient ways to open Task Manager in Windows OS is using the taskbar context menu but Microsoft removed this option in Windows 11. Now, this long-awaited feature can be enabled and used. Earlier, users were expected to get this feature with the first feature drop of Windows 11 that brings the Taskbar Overflow menu, Tabbed File Explorer, etc., but users didn’t get it. Finally, we can enable it with two easy options covered in this post below.

Before you proceed further, note that to enable this feature, you must install the KB5019509 update (OS Build 22621.675 or later) if you haven’t already. This option is already available in Beta and Dev builds of Windows 11 and Microsoft will also start rolling out this option to the Release Preview build of Windows 11. If you want to add this option now in the stable version, then you can force enable it.

NOTE: Windows 11 now offers this feature by default.

Add Task Manager option in the Taskbar context menu in Windows 11

To enable the Task Manager option in the taskbar context menu of Windows 11, you can use the following options:

Registry Editor

ViveTool.

Let’s check both options.

1] Registry Editor

Open the Registry Editor

Access the 4 name Registry key

Create a 1887869580 key

Create an EnabledState DWORD value

Set the Value date of that value

Create an EnabledStateOptions DWORD value

Restart your system.

A detailed explanation of these steps is given below.

First, type regedit in the Search box and use the Enter key to open the Registry Editor.

Jump to a Registry key named 4. Here is the path to that key:

HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlFeatureManagementOverrides4

On the right-hand section of that key, create a new DWORD (32-bit) value and rename it to EnabledState.

Now, create another DWORD value on the right-hand section of 1887869580 and rename it to EnabledStateOptions. Its Value data will be set to 0 automatically, you don’t need to change it.

You have to create both of these DWORD values and set their Value data as it is, otherwise, this Registry trick won’t work.

Finally, restart your Windows 11 PC.

In case you need to remove the Task Manager option from the taskbar context menu in Windows 11 for some reason, use the above steps. You only need to delete the 1887869580 Registry key (created in step 3) and then restart your PC to apply the changes.

Related: How to enable or disable the Task Manager in Windows

2] ViveTool

Extract the downloaded file in a folder and open that folder

Select the Copy as path option. This will copy the path or location of the chúng tôi file to the clipboard

Open Command Prompt as an administrator

Paste the copied path of the chúng tôi file in the Command Prompt window. Continue the command with enable and id arguments. The complete command would be:

ViveTool.exe /enable /id:36860984

Once the command is executed successfully, restart your computer.

When you want to disable or remove the Task Manager option from the context menu of the taskbar in Windows 11, you can use the above command with disable argument (in replacement of the enable argument). The command would be:

ViveTool.exe /disable /id:36860984

Restart your computer to let the changes take effect.

Also read: How to use the new Task Manager in Windows 11 2023

How do I get Task Manager on Windows 11 Taskbar? Where is the Task Manager option in Windows 11?

The Task Manager option is available in Win+X or WinX menu of Windows 11. You can also open Task Manager using the Search box, Ctrl+Shift+Esc hotkey, and other ways. And, if you are using Windows 11 build 22621.675, then you can also enable and add the Task Manager option in the taskbar context menu of Windows 11. You can read this post for step-by-step instructions on the same.

Read next: Task Manager is not responding, opening or disabled by administrator in Windows.

How To Boot Into Xolo Q1000 Recovery Mode

What is Recovery?

A recovery is a separate bootable partition on your Android device that you can use to install system updates and repair (factory reset) your device. A lot more can be done using a custom recovery, but the stock recovery that comes pre-installed on your Android device is limited to these features only. And FYI, these features are integrated into the Android OS as well — when you chose to factory reset your device from device settings or install an OTA update, your device reboots and boots into the stock recovery to finish the job.

The stock recovery that comes pre-installed on your device doesn’t support touchscreen mechanism. You’ll have to use the Power and Volume buttons available on your device to select and navigate between options in the recovery.

There are multiple methods to boot your Xolo Q1000 in recovery mode. The most handy (and hardware coded) method is about pressing a combination of keys for a few seconds on your Xolo Q1000 . Others are software based, let’s have a look them below:

1) Boot into Xolo Q1000 Recovery Mode Using 

HARDWARE BUTTONS

This method is a fail-proof method that’ll always work for you, unless you’ve broken one of hardware keys. In such a case you’d be left with only the other two methods discussed below.

Power off your device and wait 4-5 seconds after lights go off.

└ In recovery, use Volume Up and Down keys to navigate between options and Power key to select an option.

[ad1]

2) Boot into Xolo Q1000 Recovery Mode Using 

ADB

[ad1]

ADB stands for Android Debug Bridge, a tool used to send terminal commands to a Android device via a PC command line. ADB requires a bit of setup, but it gets the job done with much lesser effort than hardware buttons, so pretty useful in cases when you’ve to boot in recovery mode frequently. Also, if (for some reason) your hardware buttons aren’t working than this is a very good alternative to boot into recovery mode.

And make sure you’ve proper drivers installed for your device. You can download driver from this page →

Extract the file (ADB chúng tôi you downloaded from the link above to a separate folder on your computer

Prepare your phone

Enable developer options: Go to your phone’s Settings » select About phone » Scroll to the bottom and tap on “Build number” seven times to enable developer options

Enable USB Debugging: Open phone’s Settings » select Developer options » Tick the “USB debugging” checkbox (under Debugging section)

└ If the script shows any error than that means either your device is not connected or you don’t have proper driver for your device installed on your PC. For help with driver, check this page →

FYI, the ‘Boot into Recovery Mode.bat‘ script file that we used above to boot your device into recovery mode just uses one line of command:

adb reboot recovery

If you already have ADB setup on your computer and you know how to use it, then you may just use the command given above to boot into recovery mode.

3) Boot into Xolo Q1000 Recovery Mode Using 

Quick Boot (Reboot) APP

Yes! There’s an app for rebooting your phone into recovery mode, and it’s the most easier of the methods we discussed above. But it won’t work unless you’ve root access on your device, and since not everyone roos their device, we’ve put this as the last method here.

ROOT ACCESS REQUIRED

Open the app and grant Root Access

Select ‘Recovery‘ from the list of options and it’ll boot your device into recovery mode

That’s all.

How To Boot Into Karbonn A26 Recovery Mode

What is Recovery?

A recovery is a separate bootable partition on your Android device that you can use to install system updates and repair (factory reset) your device. A lot more can be done using a custom recovery, but the stock recovery that comes pre-installed on your Android device is limited to these features only. And FYI, these features are integrated into the Android OS as well — when you chose to factory reset your device from device settings or install an OTA update, your device reboots and boots into the stock recovery to finish the job.

The stock recovery that comes pre-installed on your device doesn’t support touchscreen mechanism. You’ll have to use the Power and Volume buttons available on your device to select and navigate between options in the recovery.

There are multiple methods to boot your Karbonn A26 in recovery mode. The most handy (and hardware coded) method is about pressing a combination of keys for a few seconds on your Karbonn A26 . Others are software based, let’s have a look them below:

1) Boot into Karbonn A26 Recovery Mode Using 

HARDWARE BUTTONS

This method is a fail-proof method that’ll always work for you, unless you’ve broken one of hardware keys. In such a case you’d be left with only the other two methods discussed below.

Power off your device and wait 4-5 seconds after lights go off.

└ In recovery, use Volume Up and Down keys to navigate between options and Power key to select an option.

[ad1]

2) Boot into Karbonn A26 Recovery Mode Using 

ADB

[ad1]

ADB stands for Android Debug Bridge, a tool used to send terminal commands to a Android device via a PC command line. ADB requires a bit of setup, but it gets the job done with much lesser effort than hardware buttons, so pretty useful in cases when you’ve to boot in recovery mode frequently. Also, if (for some reason) your hardware buttons aren’t working than this is a very good alternative to boot into recovery mode.

And make sure you’ve proper drivers installed for your device. You can download driver from this page →

Extract the file (ADB chúng tôi you downloaded from the link above to a separate folder on your computer

Prepare your phone

Enable developer options: Go to your phone’s Settings » select About phone » Scroll to the bottom and tap on “Build number” seven times to enable developer options

Enable USB Debugging: Open phone’s Settings » select Developer options » Tick the “USB debugging” checkbox (under Debugging section)

└ If the script shows any error than that means either your device is not connected or you don’t have proper driver for your device installed on your PC. For help with driver, check this page →

FYI, the ‘Boot into Recovery Mode.bat‘ script file that we used above to boot your device into recovery mode just uses one line of command:

adb reboot recovery

If you already have ADB setup on your computer and you know how to use it, then you may just use the command given above to boot into recovery mode.

3) Boot into Karbonn A26 Recovery Mode Using 

Quick Boot (Reboot) APP

Yes! There’s an app for rebooting your phone into recovery mode, and it’s the most easier of the methods we discussed above. But it won’t work unless you’ve root access on your device, and since not everyone roos their device, we’ve put this as the last method here.

ROOT ACCESS REQUIRED

Open the app and grant Root Access

Select ‘Recovery‘ from the list of options and it’ll boot your device into recovery mode

That’s all.

How To Boot Into Htc Sensation Recovery Mode

A recovery is a separate bootable partition on your Android device that you can use to install system updates and repair (factory reset) your device. A lot more can be done using a custom recovery, but the stock recovery that comes pre-installed on your Android device is limited to these features only. And FYI, these features are integrated into the Android OS as well — when you chose to factory reset your device from device settings or install an OTA update, your device reboots and boots into the stock recovery to finish the job.

The stock recovery that comes pre-installed on your device doesn’t support touchscreen mechanism. You’ll have to use the Power and Volume buttons available on your device to select and navigate between options in the recovery.

There are multiple methods to boot your HTC Sensation in recovery mode. The most handy (and hardware coded) method is about pressing a combination of keys for a few seconds on your HTC Sensation. Others are software based, let’s have a look them below:

1) Boot into HTC Sensation Recovery Mode Using 

HARDWARE BUTTONS

This method is a fail-proof method that’ll always work for you, unless you’ve broken one of hardware keys. In such a case you’d be left with only the other two methods discussed below.

Disable Fastboot on your HTC Sensation. Go to your device’s Settings » select Battery » and Uncheck the Fastboot option at the bottom.

Power off your device and wait for 5-10 seconds until the device is fully switched off.

└ This will boot your HTC Sensation into bootloader mode

└ In Bootloader and Recovery mode, use Volume buttons to navigate Up and Down between options and use Power button to select an option.

[ad1]

2) Boot into HTC Sensation Recovery Mode Using 

ADB

[ad1]

ADB stands for Android Debug Bridge, a tool used to send terminal commands to a Android device via a PC command line. ADB requires a bit of setup, but it gets the job done with much lesser effort than hardware buttons, so pretty useful in cases when you’ve to boot in recovery mode frequently. Also, if (for some reason) your hardware buttons aren’t working than this is a very good alternative to boot into recovery mode.

And make sure you’ve proper drivers installed for your device. You can download driver from this page →

Extract the file (ADB chúng tôi you downloaded from the link above to a separate folder on your computer

Prepare your phone

Enable developer options: Go to your phone’s Settings » select About phone » Scroll to the bottom and tap on “Build number” seven times to enable developer options

Enable USB Debugging: Open phone’s Settings » select Developer options » Tick the “USB debugging” checkbox (under Debugging section)

└ If the script shows any error than that means either your device is not connected or you don’t have proper driver for your device installed on your PC. For help with driver, check this page →

FYI, the ‘Boot into Recovery Mode.bat‘ script file that we used above to boot your device into recovery mode just uses one line of command:

adb reboot recovery

If you already have ADB setup on your computer and you know how to use it, then you may just use the command given above to boot into recovery mode.

3) Boot into HTC Sensation Recovery Mode Using 

Quick Boot (Reboot) APP

Yes! There’s an app for rebooting your phone into recovery mode, and it’s the most easier of the methods we discussed above. But it won’t work unless you’ve root access on your device, and since not everyone roos their device, we’ve put this as the last method here.

ROOT ACCESS REQUIRED

Open the app and grant Root Access

Select ‘Recovery‘ from the list of options and it’ll boot your device into recovery mode

That’s all.

How To Add Or Remove Language Packs In Windows 8

How to add language packs in Windows 8

Windows will give you a vast list of languages that it supports. You can go through the list to find the language you want and change the way languages are grouped to find them more quickly.

3. Once you pick a base language, it will give you a variety of sub-languages within that primary language. These can be subtle differences in dialects and geological locations.

4. This will redirect you to the Language options screen for the language that’s about to be installed.

From here, download and install the language pack, change the input method for the language and change Windows’ default spellcheck options based on the language.

5. A Windows Update pop-up will appear and begin the download and installation process. This can take some time, so let it run its course.

6. When finished downloading and installing, restart the PC.

7. Upon reboot, you’ll see ENG as the default input language located on the right side of the taskbar.

8. The keyboard input can be quickly changed from English to the language of choice here.

The language preferences can also be accessed from this new taskbar addition.

Once installed, there are no new options for a language other than the uninstall option.

How to switch between languages

You will have to restart Windows for the changes to take effect.

How to remove a language pack from Windows 8

Once a language pack is installed, because of the time it takes to download and install, it doesn’t need to be removed; just follow the above steps to switch between languages.

Another pop-up will appear and the uninstall process will begin. Again, this will be a lengthy process, so sit back and let Windows complete it.

Once the uninstall is finished, a prompt will instruct to restart the computer once more.

Conclusion

Melissa Popp

Melissa Popp has been a freelance writer for over a decade. While she primarily has focused on writing about technology, she’s also written about everything from custom mailboxes to health care to just about anything in between. Melissa is the Content Strategist for chúng tôi the nation’s leading marketplace for trailers for sale, the Social Media Manager for the best roofing Denver company as well as a Writer here at MakeTechEasier. She’s a proud support of the Denver SEO community and a big fan of online radio.

Subscribe to our newsletter!

Our latest tutorials delivered straight to your inbox

Sign up for all newsletters.

By signing up, you agree to our Privacy Policy and European users agree to the data transfer policy. We will not share your data and you can unsubscribe at any time.

Update the detailed information about How To Add Safe Mode To The Windows 8 Boot Menu on the Hatcungthantuong.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!