Trending December 2023 # How To Fix Safari’s “Cannot Open Page” Error On Iphone # Suggested January 2024 # Top 21 Popular

You are reading the article How To Fix Safari’s “Cannot Open Page” Error On Iphone updated in December 2023 on the website We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested January 2024 How To Fix Safari’s “Cannot Open Page” Error On Iphone

Do you see a “Cannot Open Page” error instead of the actual web page in Safari on your Apple iPhone? If so, your browser may have issues or your iPhone is experiencing technical problems. We’ll show you a few ways to get around this error.

Table of Contents

The most common causes of the above error include a faulty internet connection, Safari’s cache problems, iPhone’s software issues, and more. We’ll take a look at each possible way to fix the problem.

Refresh Your Web Page to Fix the Safari Cannot Open Page Error

When your page fails to load, the first thing to do is try to refresh the page. Doing so forces Safari to reload your page’s contents. This can fix any minor issues causing the site not to open.

You can refresh your web page by tapping the refresh icon next to Safari’s address bar.

Check Your Internet Connection

When you face network connection problems on your iPhone, check to make sure your internet connection is working. A faulty connection won’t allow browsers like Safari to load your web pages.

You can check if your internet is working by launching another site in the Safari browser or another browser (like Chrome). You may also use another device on the same Wi-Fi network to check the internet status.

If your internet connection has problems, you can try resolving those issues yourself or seek a technician’s help.

Make Sure the URL (Web Link) Is Correct

If you’re trying to open an invalid link in Safari, your browser may display the “Cannot Open Page” error. This is because the browser can’t locate your specific web page on the world wide web.

In this case, check and make sure the link you’re trying to open is invalid. If you’ve received the link from your friends or someone, let them reconfirm the link and ensure it’s the working one.

Close and Reopen Safari on Your iPhone

Quit and Reopen Safari on an iPhone X or Later

    Swipe up from the bottom of your iPhone’s screen and pause in the middle.

    Swipe up on


    ’s preview to close the browser.



    in your app list to open the app.

    Quit and Reopen Safari on Older iPhones

      Double-press the


      button to bring up your open apps.

      Swipe up on


      to close the app.



        on your app list to launch the browser.

        Clear Safari Cache on Your iPhone

        Safari stores temporary files (called cache) on your iPhone to enhance your browsing experience. Sometimes, these files become corrupt, causing various problems with the browser.

        Your “Cannot Open Page” error may be the result of a faulty Safari cache. In this case, you can remove the cache to resolve your issue.



          on your iPhone.

          Scroll down and select




            Clear History and Website Data



              Clear History and Data

              in the prompt.



              and open your web page.

              Update the iOS Version on Your iPhone

              Your iPhone receives regular software updates so you have the latest bug fixes and new features. Your Safari error may be the result of an iOS bug, which you can fix by updating your phone.

              It’s quick, easy, and free to install the latest iOS version on your iPhone.



                on your iPhone.

                  Let your iPhone check for updates.

                  Download and install the available updates.

                  Restart your iPhone.



                  and access your web page.

                  Use a VPN on Your iPhone

                  One reason you can’t access your web page is that your internet service provider (ISP) has blocked your site. If this is the case, you’ll need to use a VPN app to get around the restriction and open your web page.

                  You can choose from one of the many VPN apps to use on your iPhone. Each VPN has its own set of features and plans. Once you get such an app, launch the app, enable the VPN service, and access your web page in Safari.

                  Use Alternative DNS on Your iPhone

                  Your iPhone’s DNS servers allow your web browsers to translate domain names to IP addresses. This is how your browser can locate a specific web page on the world wide web.

                  If your configured DNS servers are experiencing issues, you may have trouble opening websites on your iPhone. In this case, you can use alternate DNS servers to fix your issue.



                    on your iPhone.



                    and choose the


                    icon next to your Wi-Fi network.


                      Configure DNS

                      to access your DNS settings.



                      followed by

                      Add Server




                        as the first DNS server. Then, use


                        as the second DNS server.



                        in the top-right corner.



                        and access your web page.

                        Reset Your iPhone

                        If you still have trouble accessing your web pages in Safari, your iPhone’s configuration may have issues. In this case, you can reset your iPhone to the factory settings to delete all the custom configurations and your personal data.

                        You can then set up your iPhone from scratch. Make sure to back up your important files before you do this, as you’ll lose all your saved data on your iPhone.



                          on your iPhone.


                            Erase All Content and Settings



                              Erase All Content and Settings

                              in the prompt.

                              Follow the on-screen instructions to reset your phone.

                              When you’ve reset your iPhone, launch


                              and try to open your web page.

                              Several Ways to Get Around Safari’s “Cannot Open Page” Error on iPhone

                              It’s frustrating when Safari displays an error message instead of the web page you expect it to show. There are a variety of reasons that happens. Using our troubleshooting fixes above, you should be able to get rid of the error and access any and all of your favorite web pages.

                              You're reading How To Fix Safari’s “Cannot Open Page” Error On Iphone

                              How To Fix Error Code 100 On Xbox?

                              Xbox is known to receive errors, of which one is error code 100 – which tells the user that something went wrong with the system, and you need to restart the Xbox. It also offers an option to start the Troubleshoot. This post will display a list of suggestions in the form of steps to help you figure them out.

                              How to fix error code 100 on Xbox

                              Follow these suggestions in a row. If one doesn’t work, follow the next.

                              Restart Console

                              Hard Reset Console

                              Update your System

                              Restore Console to Factory Settings

                              1] Restart Console

                              The first obvious step is to use the D-Bad on the controller to select Restart the Xbox option and then press the A-button. If it was a minor issue, you should be able to access the Xbox Home Screen.

                              2] Hard Reset Console

                              When an Xbox is turned off, it gets into a state where it is not entirely shut down but rather a sort of hibernation to boot up quickly the next time—sometimes restarting the Console after completely shutting down helps.

                              To hard reset, long-press the Xbox power button for few seconds. Once it shuts down, unplug the wire to power it down completely. Next, wait for 30 seconds, and then plug the mains lead back in. Turn it back on, and check if the problem is resolved.

                              Read: How to fix Xbox One startup errors or E error codes.

                              3] Update your System

                              The next way out is updating the Console in offline mode. The Start-up Troubleshooter offers the option to update the Console using a USB device.

                              You can download the file from Xbox Website on your computer. Once the zip file is downloaded, extract it, and then copy the $SystemUpdate to the USB drive.

                              Next, on the Console, select Troubleshoot instead of restart. The troubleshooter should automatically pick up the file. Still, you can also use the controller to select Offline System Update to initiate the update using the files saved on your flash drive.

                              When the update is complete, the Console will restart, and you should return to the Home screen.

                              4] Restore Console to Factory Settings

                              If nothing works, you can choose to reset the Console to factory settings. Since Xbox syncs the progress of the games online, you should not have a problem with that. However, you will need to reinstall all the applications.

                              Select Troubleshoot, and then choose to Reset this Xbox, and select Remove everything when asked. The Console will reboot, and you will have to go through the initial setup process you may have done after turning it on for the first time.

                              If nothing fixes it, then you’ll need to submit a request to have your Console repaired. You can initiate a request at chúng tôi through your account.

                              How to bring up the Xbox Troubleshoot Screen?

                              In case you don’t see this or have lost it, follow this step to bring back the Xbox Start-up Trouble-shooter.

                              Please turn off your Console, and then unplug the power cable to make sure it is turned off.

                              Wait till 30 seconds, and then plug the wire again.

                              Press and hold the Pair button and the Eject button, and then press the Xbox button on the Console.

                              Continue holding the Pair and Eject buttons for 10 to 15 seconds.

                              You should hear two power-up tones a couple of seconds apart.

                              You can release the Pair and Eject buttons after the second power-up tone.

                              It will restart the console and take to the Xbox Start-up Trouble-shooter.

                              If you have the Xbox Series S and the Xbox One S All-Digital Edition, which do not have Eject buttons, you can bring up the Xbox Startup Troubleshooter on this Console by holding only the Pair button and then pressing the Xbox button.

                              Related: Fix Your network settings block the Party Chat [0x89231806] error.

                              How To Fix Update Error 0Xca020007 On Windows 11.

                              If you are trying to update your Windows 11 computer but keep getting update error 0xca020007 and the update fails. This article will show you several different things you can do to solve the problem and get Windows updates to work once again. As this guide contains several potential solutions you should work your way through the list from the top down for the best results.

                              Windows update errors are some of the most common errors on Windows operating systems and can occur for anyone at any time without any real reason or warning. Everything can be going wonderfully and then Boom! Chaos. In my personal experience with Windows update errors, it’s usually the previous update that causes issues with the future update. Especially when it comes to feature updates (the big ones that come once a year).

                              Thankfully there are a variety of different tools you can use to solve this problem. The only issue is that you will probably need to try more than one solution to solve this problem, so don’t give up and quit because the first one didn’t work for you.

                              How do you fix Windows 11 update error 0xca020007? Windows 11 update error 0xca020007.

                              A quick and easy solution update error 0xca020007 is to run the Windows 11 Update Troubleshooter.

                              Open the Settings app by pressing Windows Key + I.

                              Here you will see a long list of troubleshooting options, however, the one you are looking for is near the top called Windows Update.

                              After the tool completes its checks and fixes, you should be able to update your device.

                              Clear Delivery Optimization Files on Windows 11 to fix update error 0xca020007.

                              If the Update Troubleshooter didn’t fix update error 0xca020007 try clearing Delivery Optimization Files.

                              Uninstall the last Windows 11 update that was installed to fix update error 0xca020007.

                              If you still have the option to uninstall the latest Windows 11 update that was installed on your computer do that. If you aren’t sure how to check out the article linked below.

                              How to uninstall a bad Windows 11 update. Rollback a Windows 11 update.

                              Download and install the latest update for Windows 11 to fix update error 0xca020007.

                              Try to manually update Windows 11 using the Microsoft Update Catalogue to fix update error 0xca020007.

                              If the Windows Troubleshooting tool doesn’t solve this problem the next best option is to manually update Windows 11 to KB5614697 (or whatever you need). Simply visit the Microsoft Update Catalogue website and download the update you are currently having problems with. Just make sure you get the update that’s being problematic for you, or a newer one. Don’t worry if you pick the wrong one, Windows won’t let you install it anyway.

                              How To Fix Error 0Xc0000005, Access Violation, And Exception Error On Windows 10.

                              If you are trying to open apps and programs on Windows 10 but constantly get error 0xc0000005, The application was unable to start correctly, Access Violation or Exception Error. This article will show you several different things you can try to fix the issue, allowing programs to open normally.

                              How to Check Your Computer’s Specifications and Status From Your Microsoft Account.

                              Windows 10 has a huge database of error messages it loves to throw at unsuspecting users whenever possible. Although Microsoft tries their best to fix this (so they say) error messages on Windows 10 seem to be getting more and more common. Barely an update goes by without a new range of error messages to experience.

                              The latest error code/s to rear their head/s are 0xc0000005, The application was unable to start correctly, Access Violation, and Exception Error. For an error message that appears as often as it does, you’d hope there would be a quick and easy fix available to remedy the problem. Sadly, this isn’t the case and you’ll need to try a range of different solutions. So follow along as we guide you through them.

                              Related: How to Stop Removable Devices Working on Windows 10. (USB Sticks, SD Cards, cameras, etc)

                              How Do You Fix 0xc0000005, The Application Was Unable to Start Correctly, Access Violation, and Exception Error on Windows 10?

                              Before you start the more complex troubleshooting steps shown below, make sure you have done all of the following quick checks. First, make sure you have done a full virus and malware scan of your system. Then run a registry cleaner like Ccleaner. Followed by uninstalling and reinstalling the offending program/app, with a system restart.

                              Finally, try to open the offending app or program with your antivirus and malware protection disabled or paused. (only do this final step if you know the software is reputable)

                              Note: On a side note, if you have recently updated Windows 10, try rolling back to the previous version. Windows doesn’t have the best update track record these days. You should also try to recall if you installed anything around the same time the errors started occurring. If you think of something, remove it from your system, then check to see if the error goes away.

                              Run ‘chkdsk’ to Fix 0xc0000005, The Application Was Unable to Start Correctly, Access Violation, and Exception Error on Windows 10.

                              An easy fix for 0xc0000005, The application was unable to start correctly, Access Violation, and Exception Error on Windows 10 you can run the Windows chkdsk tool. To run chkdsk, open Command Prompt (as admin) then enter the following command.

                              chkdsk c: /f /r

                              The command will check and fix any issues it finds automatically.

                              Check to See if You Have Any Memory Issues Fix 0xc0000005, The Application Was Unable to Start Correctly, Access Violation, and Exception Error.

                              As 0xc0000005, The application was unable to start correctly, Access Violation, and Exception Error can sometimes be caused by memory/ram issues, it’s also a good idea to check your ram. To do this type mdsched into the start menu, then select Windows Memory Diagnostic when it appears. Finally, choose the option to Restart Now and follow the prompts given by Windows during your next boot.

                              Note: Although it is quite unlikely to be the cause, you should also physically check the installation of your ram.

                              Recreate System Boot Records to Fix 0xc0000005, The Application Was Unable to Start Correctly, Access Violation, and Exception Error.

                              If the issue is caused by corrupted or modified system files you can try to recreate your system boot records. To do this open Command Prompt (as Admin), then enter the following commands, pressing Enter after each and waiting for them to complete.

                              bootrec /rebuildbcd

                              This will rebuild all the important files within the system boot record.

                              What if None of the Above Works?

                              Unfortunately, if none of the above works, you may have to resort to reinstalling a clean copy of Windows 10. The quickest and easiest way is to do a clean install of the operating system using the Keep my Files option.



                              Error 0X00000520, Windows Cannot Connect To The Printer

                              Some Windows 11/10 users have a hard time connecting a Printer to their computer. When trying to connect, they see the error message and code – Windows cannot connect to the Printer, Operation failed with error 0x00000520. In this post, we will discuss this issue and see how you can resolve it.

                              Windows cannot connect to the Printer, Error 0x00000520

                              If you see Windows cannot connect to the Printer, Operation failed with error 0x00000520, follow these solutions to resolve the issue:

                              Check Domain Authentication

                              Make sure that your device is discoverable

                              Use Printer Troubleshooter

                              Restart Print Spooler

                              Update your computer and drivers

                              Let us talk about them in detail.

                              1] Check Domain Authentication

                              As soon as you see the error code 0x00000520, you should check if there is something wrong with the Domain Authentication. Make sure that the session is not terminated. Once you are sure that there is nothing wrong with the Domain Authentication, move to the next solution.

                              2] Make sure that your device is discoverable

                              Another potential reason for this issue is the fact that the Printer is not able to discover your computer. For that, you need to check your network settings and make sure that it’s configured correctly. Follow these steps.

                              Open Settings by Win + I.

                              Switch to the Public network.

                              Now, try connecting your Printer. Hopefully, this will do the job for you.

                              3] Use Printer Troubleshooter

                              We can use a Windows built-in utility to resolve this issue. Printer Troubleshooter is a built-in feature in Windows 11/10 that will scan and resolve the issue.

                              To run Printer Troubleshooter in Windows 11 follow the given steps.

                              Open Settings from the Start Menu.

                              To run Printer Troubleshooter in Windows 10 follow the given steps.

                              Open Settings by Win + I.

                              You can also run the following command in the elevated mode of Command Prompt.

                              msdt.exe /id PrinterDiagnostic

                              It will take some time to scan and resolve the cause. Once the issue is resolved, retry connecting to the Printer and see if it helps. Hopefully, this will do the trick for you.

                              4] Restart Print Spooler

                              You may also fail to connect to the Printer if there is some kind of glitch in the Print Spooler service. That is why we are going to restart the service after clearing its content, there is nothing to worry about as they will be created again.

                              So, open File Explorer and go to the following location.

                              For 64-bit OS


                              For 32-bit OS


                              Don’t delete all the content, instead, create its backup by cutting and pasting at some other location.

                              Once this process is complete, retry connecting to your network.

                              Read: Windows cannot connect to the printer, Error 0x0000052e

                              5] Update your computer and drivers

                              If nothing worked, your last resort is to update your system as the can be a bug. To do the same, you can check for updates from Windows Settings or update from Microsoft Update Catalog to install Windows Update KB5006674 or later. Once the updates are downloaded and installed, try adding your Printer. If this doesn’t work, we need to update your Printer’s drivers. Following are some of the methods to do the same.

                              This should do the job for you.

                              Hopefully, you are able to resolve the issue with these solutions.

                              Read: Printer Error 0x00000709 when you try to Connect or set a Default

                              How do you fix the error Windows Cannot connect to the printer?

                              There are various error codes of Windows cannot connect to the printer error. If you see one with error code 0x00000520 try the solutions mentioned in this post. Also, if there is some other error code you are seeing, use it to search for solutions. Most of the error codes can be found on our website.

                              Read: Windows couldn’t connect to the Printer

                              How do you solve Windows Cannot connect to the printer 0x0000011b?

                              Error code 0x0000011b is a Network Printer error. The error is usually caused by a glitch or misconfiguration and can be easily resolved. Also, this error code is noticed on some problematic updates, so if you are one of them, chances are you will see it.

                              To resolve the issue, check this guide on what to do if you see Printer error 0x0000011b appears.

                              That’s it!

                              Also read: We can’t install this printer right now, Error 740.

                              5 Ways To Fix “Your Organization’s Data Cannot Be Pasted Here” Error In Windows

                              Your computer displays a “Your organization’s data cannot be pasted here” error when you attempt to paste data across Office applications (Word, Excel, Outlook, etc.) without administrative authorization. Temporary software glitches on your computer or Office application can also trigger the error.

                              This tutorial covers five ways to fix issues causing the “Your organization’s data cannot be pasted here” error on Windows and Mac computers.

                              Table of Contents

                              1. Modify the Intune Application Protection Policy

                              Companies use Microsoft Intune app protection policies to safeguard data on computers issued to employees. You’ll get the “Your organization’s data cannot be pasted here” error if your company’s Microsoft Intune policy settings restrict data transfer outside work applications.

                              If you have administrative access, modify your company’s Microsoft Intune protection policy to allow data transfer outside managed apps. Alternatively, create a new policy that allows data transfer between any application.

                              Note: Contact your administrator if you can’t access your company or organization’s Microsoft Intune dashboard.

                              Sign in to your company or organization’s Microsoft Intune dashboard.

                              Select the


                              option on the left sidebar and choose

                              App protection policies


                              Select an existing policy setting and head to the “Data Transfer” section. Next, set the “Restrict cut, copy, and paste between other apps” option to

                              Any app


                              If your company or organization has no app protection policy, select the Create policy option to make one.



                              to save changes to the protection policy settings.

                              Restart your computer if you still get the “Your organization’s data cannot be pasted here” error after disabling data transfer restrictions in Microsoft Intune.

                              2. Reboot Your Computer

                              You might encounter problems copying or pasting data if your Office app is unresponsive or lagging. Closing the Office application and restarting your computer might resolve the issue.

                              Ensure you save or back up your file before closing your Office app or rebooting your computer, so you don’t lose unsaved work.

                              Reboot Windows PC

                              Open the Start menu, select the Power icon, and select Restart.

                              Reboot macOS Computer

                              Select the Apple icon on the menu bar and select Restart.

                              3. Update the Microsoft Office Suite

                              Microsoft Office applications sometimes malfunction and throw error messages if they are buggy or out-of-date. Update your Microsoft Office applications and check if you can copy or paste export data across the apps.

                              Connect your computer to the internet (Wi-Fi or Ethernet) and follow the steps below to update your Office application.

                              Open the Office application and open the

                              File tab

                              on the Ribbon.



                              on the sidebar.

                              Expand the

                              Update Options

                              drop-down option and select

                              Update Now


                              You’ll get another notification when the update is complete. Close the update client, reopen the Office application, and check if you can now copy and paste data.

                              You can also update Office Suite apps from the Microsoft Store. Refer to our tutorial on updating Microsoft Office apps for step-by-step instructions.

                              4. Paste Into a Different File or Document

                              Sometimes, the “Your organization’s data cannot be pasted here” error is file-specific. Open a new file in the Office application and check if you can paste copied text.

                              If successful, the document/file you can’t paste into is likely corrupt. One way around this issue is to duplicate the problematic Office document and check if you can paste text in the duplicate copy.

                              Repair the document if the error persists. Refer to our tutorial on repairing damaged or corrupt Office documents for instructions.

                              5. Enable Editing on the File

                              The first time you open a file downloaded from the internet in Office apps, the file opens in read-only mode. This mode is called the “Protected View,” a security feature that reduces the risk of damaged or potentially malicious files infecting your computer.

                              You can’t paste or modify texts in documents open in Protected View. Microsoft Office apps display a “PROTECTED VIEW” message below the ribbon when a file isn’t editable.

                              Select the Enable Editing button at the end of the message to allow modifications in the document.

                              Try pasting text in the document and check if disabling Protected View stops the “Your organization’s data cannot be pasted here” error. Check if you’re authorized to copy or paste data in the app if the error persists.

                              Paste Your Organization’s Data Anywhere, Anytime

                              These troubleshooting methods can help you overcome limitations preventing you from pasting data in Office applications on your computer. Contact Microsoft Support, repair the Office application, or contact your company’s IT support department if the problem persists.

                              Update the detailed information about How To Fix Safari’s “Cannot Open Page” Error On Iphone on the website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!