Trending March 2024 # Unable To Reset Your Pc: Required Drive Partition Missing # Suggested April 2024 # Top 7 Popular

You are reading the article Unable To Reset Your Pc: Required Drive Partition Missing updated in March 2024 on the website We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested April 2024 Unable To Reset Your Pc: Required Drive Partition Missing

Unable to Reset Your PC: Required Drive Partition Missing Resolve this annoying issue once and for all




The unable to reset your PC required: drive partition is missing error occurs because of a corrupted MBR or system files, among other things.

Users can fix this reset PC error with the Bootrec utility.

Running SFC and Check disk scans might also resolve this issue for some users.



To fix Windows PC system issues, you will need a dedicated tool

Fortect is a tool that does not simply cleans up your PC, but has a repository with several millions of Windows System files stored in their initial version. When your PC encounters a problem, Fortect will fix it for you, by replacing bad files with fresh versions. To fix your current PC issue, here are the steps you need to take:

Download Fortect and install it on your PC.

Start the tool’s scanning process to look for corrupt files that are the source of your problem

Fortect has been downloaded by


readers this month.

Users can usually reset their PCs to factory settings with the Reset this PC tool in Windows 11/10. However, some users have reported an error that stops Windows resetting. That error’s message says:

Unable to reset your PC. A required drive partition is missing.

Sometimes users can’t boot into Windows because of this issue. In this case, troubleshooting needs to be applied via the Windows Recovery Environment.

What causes the Unable to reset your PC error?

The Unable to reset your PC error can arise because something is corrupted or file system errors. These are some of the more specific causes attributed to Unable to reset your PC issue:

A corrupted master boot record: Windows doesn’t reset the PC because of a corrupted master boot record.

Corrupted system files: The Unable to reset your PC error arises because of damaged system files.

Bad drive sectors: Your hard drive could have some bad disk sectors.

An incorrectly set active partition: The system partition isn’t set correctly.

To fix this error, you must apply solutions to address those causes. These are some potential Windows 11/10 resolutions for the Unable to reset your PC issue.

How can I fix the Unable to reset your PC error? 1. Run the SFC Command Prompt tool

Expert tip:

⇒ Get Fortect

2. Run a Chkdsk (disk) scan 3. Run the Bootrec tool 4. Use the Startup Repair option 6. Set your system partition

The select commands above include the value 0 only for the sake of an example. You should replace the 0 value in those commands with the actual number for your PC’s system partition and the disk, including that partition.


Warning: Your PC won’t boot if you don’t set the system partition right.

The Unable to reset your PC error is a severe issue when users can’t get into Windows after it occurs. There aren’t any guaranteed fixes for this error, but the ones above are most likely to work.

If they don’t resolve the Unable to reset your PC error, consider reinstalling Windows via USB with the Media Creation Tool. Or send your PC to a reputable IT repair service for further support.

Still experiencing issues?

Was this page helpful?


Start a conversation

You're reading Unable To Reset Your Pc: Required Drive Partition Missing

Unable To Upload Files To Google Drive On Windows Pc

Some users may be unable to upload files to Google Drive via the web interface on a Windows 11/10 PC. This is primarily because the web version of Google Drive is more susceptible to upload issues. This post will explore a couple of possible remedies to this issue.

Unable to upload files to Google Drive

The recommended troubleshooting for this issue is listed as follows:

Disconnect and Reconnect Google Account.

Restart/Reinstall Backup and Sync.

Disable Ad Blockers for Google Drive.

Split your file upload into smaller parts.

Check the status of Google Drive.

Use Private/Incognito window.

Clear Browser Data.

Use a different browser.

Make sure images are turned on.

Check your network connectivity.

Check issues with the file.

Let’s take a detailed look at these troubleshooting steps.

Before you begin, try signing out of your Google account and signing in back again. If that doesn’t help, you can now proceed with the solutions outlined below in no particular order.

1] Disconnect and Reconnect Google Account

Here, you’ll need to disconnect and reconnect your Google account to the Backup and Sync app.

Here’s how:

2] Restart/Reinstall Backup and Sync

You can try restarting or even reinstalling the Backup and Sync app.

Here’s how:

To reopen it, type backup and sync into Windows search and select the app from the result.

Alternatively, you can reinstall Backup and Sync altogether. To uninstall the app, do the following:

Press Windows key + R. In the Run dialog box type chúng tôi and hit Enter.

In the Programs & Features applet, select the app from the list and uninstall it.

Download the app and reinstall it.

3] Disable Ad Blockers for Google Drive

So if you’re having issues uploading files, try disabling or whitelisting the Google Drive website in your ad-blocking tool.

4] Split your file upload into smaller parts

Google is designed to handle individual files as large as 5TB (unless they’re Google file formats like Docs or Sheets, in which case they’re 50MB). So if you’re having issues uploading large folders to Google Drive – upload timing out or crashing, then explore the contents of the folder, select the files and upload each separately. Google Drive will queue them up automatically and may handle the files better.

5] Check the status of Google Drive

Head over to G Suite Status Dashboard to check whether there are any outages to Google Drive. If you see that Google Drive is down, then all you need do is wait for the service to be back up again.

6] Use Private/Incognito window

Here, open a private window in your browser and log in to Google Drive. Then try uploading the file(s) again to see if it works.

7] Clear Browser Data

Your browser saves cookies, cache, and other data to make it easier and faster for you to surf the web. However, sometimes this data can also create browsing problems, like being unable to upload files. In this case, you need to clear your Edge or Chrome/Firefox browser data.

8] Use a different browser

You might be experiencing this issue due to a temporary support issue with your browser or because your browser doesn’t support Google Drive. However, the latter is highly unlikely for popular browsers like Chrome, Firefox, Opera, Safari, IE, and Edge.

If you are using one of the browsers mentioned above and changing the browser fixed the upload problem, try updating your browser to the latest version. If that doesn’t help, then wait for the next version update that might fix this issue.

9] Make sure images are turned on

For some reason, Google Drive might stop working properly if images are turned off in the browser. You may be able to use it for editing and viewing data, but uploading and downloading won’t work. Refer to this guide to enable/disable images in your browser.

10] Check your network connectivity

It’s possible you’re encountering this issue due to your network connectivity if the files upload but terminates in the middle with a network error. In this case, restarting your router could remedy the issue. If that fails, try changing your IP address and also turn off the firewall.

Connecting via a VPN may also affect the upload process, so ensure your VPN is turned off.

If you are sure, it’s a network error, resetting your router (refer to your product guide) might fix this.

11] Check issues with the file

Also, if the file is huge – over 2 GB, then use 7-Zip to split the file, then upload and see if that works.

Why can’t I upload documents to Google Drive?

First, check if your file is corrupt by opening it. If you can see the content, then the document is not corrupt. Second, ensure you have permission to upload the document if you are attempting to upload it to a shared folder. Lastly, if you cannot sync your files using the desktop app, check if you need an update. Sometimes software update is essential to ensure file upload happens without any issue.

Why does upload fail to Google Drive?

How To Reset Nvram On Your Mac

Macs are nice computers, but they’re not without their issues that can spur up at random times. Fortunately, troubleshooting problems on a Mac isn’t incredibly difficult and there are tons of simple steps you can take as a Mac user before calling AppleCare for support.

One of the easiest troubleshooting steps is resetting your Mac’s NVRAM, a step which can solve an array of problems. In this tutorial, we’ll explain what the NVRAM is responsible for and how to reset it to fix common problems.

What is NVRAM?

Your Mac’s NVRAM (non-volatile random access memory) is a type of non-volatile memory, which means that even when power is no longer being supplied to it, it can retain its memory contents. This is different from volatile memory, which loses all of its memory contents whenever the power supply is cut off from it.

As noted by an Apple support document, the NVRAM is present on all Intel-based Macs and is responsible for storing information related to a variety of software functions on your Mac that are essential to the user experience in the macOS operating system; this variety includes the following:

The volume at which you’ve set your speakers

The resolution your display has been configured at

The start-up disk you’ve chosen to boot up with by default

The time zone you’ve selected for your Mac to display the time for

Any recent information logged by a kernel panic

This information has to be stored in non-volatile memory because if the memory were unable to retain information about your system volume, display, time zone, and start-up disk each and every time you turn off your Mac, then your Mac would restart with a default setting for each of the aforementioned system settings all the time, rather than remembering the settings you’ve chosen for each.

Why to reset the NVRAM on your Mac

If you are experiencing any issues with your system’s speaker volume, screen resolution, system time, or start-up disk, and there doesn’t appear to be any simple way of fixing the issues from macOS, you may be due for resetting the NVRAM, as it’s possible it’s not doing its job properly due to memory corruption.

Resetting the NVRAM will put your system’s NVRAM back to factory defaults, which means when you restart your computer after resetting the NVRAM, your system volume, screen resolution, and start-up disk selection settings will all be set to how they were configured when you turned your Mac on for the first time after removing it from its factory packaging.

How to reset your Mac’s NVRAM

Resetting your Mac’s NVRAM is a simple process, it just involves restarting your Mac and holding down a certain keyboard key sequence as it boots back up. We’ll walk you through the steps below:

Step 1: Completely shut down your Mac by using the  “Apple” menu in the Menu Bar and selecting the “Shut Down” option.

Step 2: After shutting down your Mac, locate the Command, Option, P, and R keys on your keyboard, as these are the keys you’ll be using.

Step 3: Turn on your Mac using the power button.

Step 4: Press and hold the Command, Option, P, and R keys on your keyboard at the same time as soon as you hear your Mac’s startup chime sound.

Step 5: Continue holding these keys until you hear the startup sound for a second time, then release the keys all at the same time.

Note: The volume level of the second startup chime may be different from the initial startup chime. This is a good sign, as it indicates your system volume level has been reset to factory settings and indicates a successful NVRAM reset.

Step 6: When your computer restarts, re-configure any volume settings, screen resolution settings, time zone settings, and start-up disk settings as needed.

Once you’ve completed all these steps, you’re finished, and your Mac should stop behaving oddly. If it doesn’t you may need to contact AppleCare for further assistance, as it’s possible the logic board itself could be bad. Apple notes that there is a small battery on the logic board that helps the NVRAM retain information that can go bad after time, and sometimes the battery is the only thing that needs to be replaced.

Older non-Intel Macs use PRAM or parameter random access memory instead of NVRAM. The reset process for PRAM is exactly the same on these Macs as the reset process for NVRAM on modern Macs.

Wrapping up

Hopefully resetting the NVRAM is all you’ll ever have to do to fix small issues with your Mac, but if you ever need to try other troubleshooting steps, we’ve got all the guides you’ll ever need.


How To Reset Your Apple Tv Remote

Is your Apple TV or Siri Remote unresponsive? Do some buttons occasionally malfunction, or has your remote stopped working entirely? Resetting the remote might resolve these issues.

There’s no option to reset your Apple TV Remote in the tvOS settings menu. However, there are two workarounds: restart the remote or reconnect it to your Apple TV from scratch. Both methods are straightforward and involve pressing specific key combinations.

Table of Contents

How to Restart Your Apple TV Remote

Rebooting your Apple TV Remote is one way to soft reset the remote controller. Turn on your Apple TV and follow the steps below to restart your Apple TV or Siri Remote.

Press and hold the

Volume Down


Control Center

buttons on your Apple TV remote for at least 5-10 seconds. This key combination turns off your remote and unpairs it from the Apple TV box.

Release both buttons when your Apple TV’s status light goes off and comes back on.

You should see a “Remote Connection Lost” message in the top-right corner of your Apple TV screen.

The remote should automatically restart in another 5-10 seconds—check your TV for a

Remote Connected


Press the Power button (or any button) to turn on the remote if it doesn’t restart automatically.

How to Reconnect Apple TV or Siri Remote

Another way to reset your remote is to put it in pairing mode and reconnect it to your Apple TV device.

Position the remote close to your Apple TV (8-10 centimeters) or on the streaming box.

If you have the Siri Remote (2nd generation or later), press and hold the



Volume Up

buttons for two seconds. That’ll put the remote in pairing mode.

On the 1st generation Siri Remote, press and hold the Menu and Volume Up buttons for 2-5 seconds to initiate remote pairing mode.

The pairing process typically takes about 5-10 seconds. The “Pairing Remote” notification disappears when your Apple TV Remote pairs successfully.

How to Reconnect Apple Remote

Follow the steps below to unlink and reconnect the white or aluminum Apple Remote from your Apple TV.

Press and hold

Left Arrow



buttons for 5-10 seconds.

Release the buttons when you see a broken chain icon on your TV screen.

Press and hold the

Right Arrow



buttons for 5-10 seconds to pair the remote.

Release both buttons when a chain link icon appears on your TV screen.

Can’t Restart or Reset Your Apple TV Remote? Try These Fixes

Try the troubleshooting steps below if you can’t reset your Apple TV Remote and it isn’t working as expected.

1. Power-cycle Your Apple TV

Unplug your Apple TV from its power outlet and wait 5-10 seconds. Reconnect the streaming device to its power source and try resetting your Apple TV remote.

2. Update Your Apple TV

We recommend updating your Apple TV’s operating system if you can’t pair or reset your remote. Use the Apple TV Remote app to control your Apple TV if your remote isn’t working.

Seek Professional Assistance

Contact Apple Support if you can’t use or reset your Apple TV or Siri Remote. There’s a chance that the remote is defective or damaged.

How To Factory Reset Your Iphone And Ipad

There are a few different situations in which you may want to factory reset your iPhone or iPad. For instance, if multiple apps are repeatedly crashing, if your device is running slow, or if your iPhone is behaving erratically, and you can’t work out the reason or solution.

The factory reset wipes out your device and can fix specific problems that may be impairing its performance. This stands true for all the iPhones right from the latest iPhone 14 series to the iPhone 6s.

However, it should be thought of as a last resort and must only be done after more straightforward solutions such as restarting or force restarting your device have not fixed the issues you’re encountering.

What happens when you factory reset your iPhone?

As the term ‘factory reset’ suggests, this option restores the software on your device to the way it was when it left the factory. This means that all the settings return to the default, and all your data such as downloaded apps, photos, music, documents, and other files are deleted. After a factory reset of your iPhone or iPad, you can practically set up your device from scratch ‘like new’.

Does a factory reset delete everything?

This depends on what exactly you are resetting. Whether you’re looking to factory reset an iPhone 14, iPhone 14 Plus, iPhone 14 Pro, iPhone 14 Pro Max, iPhone 13 series or any of its predecessors, there are six different options available. Let’s have a brief look at each of them.

When you go to Settings → General → Reset:

Reset All Settings: This will reset your Home screen layout, location settings, network settings, privacy settings, the keyboard dictionary, and your Apple Pay cards to the default. If you choose this option, you Will not delete Files and media.

Reset Network Settings: This deletes all your network settings such as wifi login credentials and networks that your phone automatically connects to. Further, manually trusted website certificates are rolled back to untrusted, and your device’ name’ is reset to just “iPhone”

Reset Keyboard Dictionary: Selecting this option will delete any words you might have added to the default keyboard dictionary on your iPhone

Reset Home Screen Layout: This will eliminate your custom layout or app folders on the Home screen. All the stock iOS apps will return to their default positions, and the Home Screen will return to looking like it was when you first set up your iPhone. Your data will be safe.

Reset Location & Privacy: As the name suggests, this option restores the location services and privacy settings of your iPhone to their defaults.

Erase All Content & Settings: This option is what we usually refer to when talking about factory reset. It completely removes all of your content and settings, restoring your iPhone to the way it was when you first bought it

So, it is only the Erase All Content & Settings option that will delete all the data from your device except the default apps and settings.

Get your device ready for factory reset

Before attempting to factory reset your iPhone or iPad, please ensure that you do the following:

How to factory reset iPhone or iPad (including iPhone 14 series)

There are four ways to reset your iPhone or iPad. Let’s first look at the easiest and most convenient one.

How to factory reset iPhone or iPad using iCloud

If your iPhone gets lost or stolen, you can remotely wipe all its content using the iCloud website. This is only possible if you had set up Find My iPhone.

This process will lock your iPhone. And if you following this process to reset your device, you can unlock it by entering your Apple ID and password.

Reset your iPhone or iPad using Mac or PC

Factory reset iPhone/iPad using Finder

Factory Reset iPhone/iPad Using iTunes

Factory reset iPhone or iPad using Recovery Mode

You can also use Recovery Mode to reset your device. This is usually necessary when:

iPhone or iPad is stuck on the Apple logo for several minutes

Computer does not recognize your device when you connect it

Computer says your device is in Recovery Mode when you connect it

To erase your iPhone or iPad using Recovery Mode, follow these steps: 

Connect your device to a computer and put it in Recovery Mode. The procedure for this varies according to what model you have

Once your computer locates your device, a message will appear to Restore or Update

Select Restore and follow the on-screen instructions

This will wipe out your iPhone or iPad data and will download the latest version of iOS or iPadOS supported by your device

Once the process is complete, you will see a notification on-screen, and your device will restart

What to do after resetting your iOS device?

Once you have factory-reset your iPhone or iPad, all your data will have been deleted, and your device will be ‘like new’. So here’s what you can do next:

Set it up as new

After a factory reset process, your device will display the initial setup screen. Follow the instructions on screen to set it up from scratch. Alternatively, you can choose to restore your iOS device from iCloud backup

Read more:

Author Profile


A self-professed Geek who loves to explore all things Apple. I thoroughly enjoy discovering new hacks, troubleshooting issues, and finding and reviewing the best products and apps currently available. My expertise also includes curating opinionated and honest editorials. If not this, you might find me surfing the web or listening to audiobooks.

How To Connect Your Xbox To Your Windows Pc

As a Windows-based device, the Xbox has a lot in common with a typical Windows PC. The Xbox is one of the best consoles for interacting with a Windows PC, with the ability to stream games, share media content, and more. If you want a seamless multimedia experience, combining the Xbox and a Windows PC makes sense.

As long as you have the correct network setup, it’s an easy process to connect an Xbox to a PC. You’ll need both devices on the same network and, if you want to stream content, an ethernet connection is preferred. If you want to know how to connect your Xbox to a Windows PC, here’s what you’ll need to do.

Table of Contents

Connecting an Xbox to a Windows PC Using the Xbox App

The Xbox Console Companion app gives you full control of your Xbox One console from your Windows PC. It allows you to start up or shut down your Xbox, stream Xbox games to your PC over your local network connection, install or remove games, as well as chat with your Xbox gaming friends.

The Xbox Console Companion app is installed on all Windows PCs, as part of Microsoft’s plan to further integrate the two services. If you have a local user account, you’ll need to sign in using your Microsoft account to use the app—existing Microsoft account users should find the app signs them in automatically.

While the Xbox app is linked to your Microsoft account, it won’t automatically connect to your Xbox—you’ll need to do this manually. To do this, press the Connection icon in the left-hand menu of the Xbox app on your PC.

Windows will search for your Xbox One console automatically. If it detects it, press the Connect button. If you need to do this manually, type the IP address for your Xbox in the box provided, then press Connect to connect to it.

Once the Xbox is added, you should see it listed in your Connections tab. From here, you can power the Xbox on or off, view the currently open game or app, test the streaming quality, or stream the Xbox to your PC by pressing Stream.

Streaming Xbox Games to a Windows PC

You can stream Xbox games to your PC from the Connections tab in the Xbox Console Companion app.

In the Connections tab, press the Stream button to begin streaming the Xbox One console to your PC.

Once you’ve established the stream, you’ll need to decide if you want to connect your Xbox One controller to your PC or continue to operate it from your Xbox. If your Xbox is a bit further away, you may wish to connect it to your PC. Once you’re ready to proceed, press Continue.

Using your Xbox controller, you can navigate your Xbox One menu as normal. Play a game by selecting it from the My games and apps menu.

Streaming Media Content to an Xbox Using Microsoft Movies & TV

In the Add a device menu, select your Xbox One console from the list once the scanning process has completed.

You can now stream content from the Microsoft Movies & TV media app. You’ll need the same app installed on both your Xbox and PC for this to work. 

In the Connect menu, select your connected Xbox One console. This will open the Movies & TV app on your Xbox and stream the content from your PC for playback.

Streaming Media Content to an Xbox Using Kodi

If you’d prefer to use alternative media apps, then apps like Kodi can be installed on your Xbox. Kodi supports a full range of media playback options, including the ability to access network shares from a Windows PC or other network attached storage devices.

In the plugin options window, press Enable to enable the plugin.

In the Add file source window, press Browse.

In the Browse for new share window, select Windows network (SMB).

If you need to provide a username and password to connect, select Add network location instead. Select Windows network (SMB) from the Protocol drop-down menu, then select a location, username, and password using the options provided.

Xbox Gameplay From Your Windows PC

Update the detailed information about Unable To Reset Your Pc: Required Drive Partition Missing on the website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!