Trending February 2024 # Xwlpm – Official Android 4.0.4 Update For Galaxy S2 # Suggested March 2024 # Top 5 Popular

You are reading the article Xwlpm – Official Android 4.0.4 Update For Galaxy S2 updated in February 2024 on the website Hatcungthantuong.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested March 2024 Xwlpm – Official Android 4.0.4 Update For Galaxy S2

Just a few days after the first Android 4.0.4 firmware leaked for the Galaxy S2, Samsung has officially released the Android 4.0.4 update for the device, for Russia, and should soon be releasing it to other regions. But for those not wanting to wait for the official update to arrive for their device or simply want to manually flash the update can do so by following the guide below. Android 4.0.4 brings improvements in stability and performance (specially in scrolling smoothness), so it’s quite an important update for the still powerful device.

This update is for Russia but can be flashed on any Galaxy S2 out there, as long as it’s the international I9100 variant. Read on to find out how you can flash it on your Galaxy S2 to update to Android 4.0.4.

Compatibility

This firmware and the guide below are compatible only and only with Galaxy S2, model number I9100. It’s not compatible with the I9100G or any other device. Check your device’s model number in: Settings » About phone.

Warning!

The methods and procedures discussed here are considered risky and you should not attempt anything if you don’t know completely what it is. If any damage occurs to your device, we won’t be held liable.

How to Install XWLPM Android 4.0.4 Firmware on Galaxy S2

Important! Don’t forget to at least make a backup of your APN settings, which you can restore later if your data connection does not work after installing the ROM. Use the backup guide to find out how.

Extract the downloaded zip file once to get a file named I9100XWLPM_I9100OXELP8_I9100XXLQ6_HOME.tar.md5 (you might see the file name end with .tar instead of .md5 as the file extension is usually hidden, so it’s normal).

Extract the contents of the Odin 1.85.zip file to a folder.

Disconnect your phone if it’s connected to PC, then switch it off.

Now, put the Galaxy S2 in Download Mode — press and hold these keys together: Volume Down + Home + Power. A Warning! screen will come up; press Volume Up key to continue to enter Download Mode.

If you don’t get this message, then probably there is a problem with drivers. Make sure you’ve proper drivers installed (check step 2). Also, uninstall Kies from the Control Panel as well (this will leave the drivers on the computer but remove Kies which can interfere with the procedure).

Important! Do not make any other changes in Odin except selecting the required files as given in step 11. Leave all other options as they are. Make sure Re-partition option is unchecked.

What to do if Odin gets stuck: If ODIN gets stuck and doesn’t seem to be doing anything, or you get a FAIL message (with red background) in ODIN, disconnect the phone from the PC, close ODIN, remove battery, re-insert it, turn phone on in Download mode again, and do the procedure again from Step 9.

[Important] After you get the PASS message and the phone reboots, the phone might get stuck at the booting animation. If that happens, perform the following steps to make it boot. Remember that these steps will wipe your personal data like contacts, apps, messages, etc. If your phone has already booted, skip these steps, your phone has been updated successfully:

Boot to recovery mode — for which, first power off phone (by removing battery and reinserting it), wait for 5-6 seconds, and then press and hold Home + Volume Up + Power keys together till the screen turns on, then let them go to boot into recovery. Once you are in recovery mode, use volume keys to move the selection up and down and home/power key to select the option.

Go to Wipe data/Factory Reset and select it. Select Yes on next screen.

Then, select reboot system now to reboot the phone, which will now boot properly.

If you run into any roadblocks while flashing the firmware, let us know and we’ll help you out.

You're reading Xwlpm – Official Android 4.0.4 Update For Galaxy S2

Ics Android 4.0.4 Update For Samsung Galaxy S2 International Version I9100

The disappointing news a few days ago that the Galaxy S2 will not be getting updated to Android 4.0.4 and will be stuck at 4.0.3 has been null and voided by an actual Android 4.0.4 firmware that has leaked for the phone — XXLQ5. Android 4.0.4 is quite smoother and faster and more stable than 4.0.3, so people stuck on the not-so-smooth 4.0.3 on the Galaxy S2 will be very happy.

Keep in mind that XXLQ5 is a leaked hence unfinished firmware, and while it may work without any major problems, it may have a few bugs and issues. There are reports that the firmware is quite smoother than previous ones without any noticeable problems, so it is completely usable as a daily driver.

Read on to find out how you can update your Galaxy S2 to Android 4.0.4 with the XXLQ5 firmware.

Compatibility

This firmware and the guide below are compatible only and only with Galaxy S2, model number I9100. It’s not compatible with the I9100G or any other device. Check your device’s model number in: Settings » About phone.

Warning!

The methods and procedures discussed here are considered risky and you should not attempt anything if you don’t know completely what it is. If any damage occurs to your device, we won’t be held liable.

How to Install XXLQ5 Android 4.0.4 Firmware on Galaxy S2 i9100

Important! Don’t forget to at least make a backup of your APN settings, which you can restore later if your data connection does not work after installing the ROM. Use the backup guide to find out how.

Extract the downloaded zip file once to get the following files (you might see the file name end with .tar instead of .md5 as the file extension is usually hidden, so it’s normal):

I9100_CODE_I9100XXLQ5_CL753921_REV02_user_low_ship.tar.md5

GT-I9100-MULTI-CSC-OXALQ5.tar.md5

MODEM_I9100XXLQ5_REV_02_CL1165929.tar.md5

u1_02_20120326_emmc_EXT4_8GB.pit [ignore this one]

Extract the contents of the Odin 1.85.zip file to a folder.

Disconnect your phone if it’s connected to PC, then switch it off.

Now, put the Galaxy S2 in Download Mode — press and hold these keys together: Volume Down + Home + Power. A Warning! screen will come up; press Volume Up key to continue to enter Download Mode.

If you don’t get this message, then probably there is a problem with drivers. Make sure you’ve proper drivers installed (check step 2). Also, uninstall Kies from the Control Panel as well (this will leave the drivers on the computer but remove Kies which can interfere with the procedure).

In ODIN, do the following:

Now, hit the START button to start flashing the firmware. When the flashing is complete, your phone will automatically reboot — and when you see the Samsung logo, you can safely unplug the cable. Plus, you’ll get a PASS (with green background) message in the left-most box at the very top of the Odin. What to do if Odin gets stuck: If ODIN gets stuck and doesn’t seem to be doing anything, or you get a FAIL message (with red background) in ODIN, disconnect the phone from the PC, close ODIN, remove battery, re-insert it, turn phone on in Download mode again, and do the procedure again from Step 9.

If you run into any roadblocks while flashing the firmware, let us know and we’ll help you out.

Ics Android 4.0.4 Update For Samsung Galaxy Tab 7.7 P6800

After making people wait for many months, Samsung recently started rolling out the Android 4.0 for their existing line of tablets, starting with the Galaxy Tab 7.7 P6800, bringing all the Ice Cream Sandwich features such as improved multitasking, better data management, a new interface, and more.

The update for the Galaxy Tab 7.7 – firmware XXLQ1 – is available online for manual flashing, in case the update hasn’t reached your device yet or if you do not want to wait for it to arrive. And the guide below will help you flash the Android 4.0.4 update on your tablet.

Important! Keep in mind that this firmware is ONLY for the Galaxy Tab P6800, which is the Wi-Fi+3G variant. It will NOT work on the P6810 aka the Wi-Fi-only variant.

Read on to find out how you can manually update your Galaxy Tab 7.7 to Android 4.0.

Compatibility

This ROM and the guide below are compatible only and only with the Samsung Galaxy Tab 7.7, model number P6800. It’s not compatible with any other device. Check your device model in Settings » About tablet.

Warning!

The methods and procedures discussed here are considered risky and you should not attempt anything if you don’t know exactly what you are doing. If any damage occurs to your device, we won’t be held liable.

First, download and install Kies on your computer in order to install the drivers for the tablet. After installing Kies, however, make sure Kies is NOT running. Exit it from the Taskbar at the bottom if it is running as it can interfere with the flashing process.

Important! Don’t forget to at least make a backup of your APN settings, which you can restore later if your data connection does not work after installing the ROM. Use the backup guide to find out how.

Extract the XXLQ1_OXALQ1_ATO.rar file to get a folder with this file inside — P6800OXALQ1_P6800XXLQ1_HOME.tar.md5, which you will be using in Odin’s PDA box to be flashed on phone.

Filename: Odin3-v1.85.zip

Extract the contents of the Odin3-v1.85.zip file to a folder.

Now, turn off your Galaxy Tab 7.7, then boot into Download Mode. To do so, press and hold the Volume Down + Power buttons till the screen turns on, then let go of the power button but KEEP holding the Volume Down button till you get a caution prompt asking you whether you want to enter download mode. Here, let go of the volume down button then press the Volume Up button to confirm and enter download mode.

Connect your tablet to the computer. You should get the message “Added!” under Odin’s message box in the bottom left. If you don’t get this message, then probably there is a problem with drivers. Check that Kies is properly installed (but again, make sure it is not actively running even in the taskbar). Also try to switch to another USB port – preferably a USB port on the back if using a desktop computer.

Important! Do not make any other changes in Odin except selecting the required file in PDA as given in step 9. Leave all other options as they are. Do NOT check the Re-partition option.

Now, hit the START button to start flashing the XXLQ1 Android 4.0 firmware on your Galaxy Tab 7.7. After the flashing is complete, the tablet will automatically reboot. You’ll also get a PASS message in ODIN. You can now safely disconnect your tablet from the computer. What to do if Odin gets stuck: If ODIN gets stuck and doesn’t seem to be doing anything, or you get a FAIL message (with red background) in ODIN, disconnect the phone from the PC, close ODIN, remove battery, re-insert it, turn tablet on in Download mode again, and do the procedure again from Step 7.

If you run into any roadblocks while flashing the firmware, let us know and we’ll help you out.

Root Sprint Samsung Galaxy S2 Epic Touch 4G Sph

  WARNING!

Warranty may be void of your device if you follow the procedures given on this page.

You only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components.

  GUIDE: ROOT SPRINT SAMSUNG GALAXY S2 EPIC 4G

Before you begin with the instructions below, make sure your android device is adequately charged — at least 50% battery of the device.

  STEP 0: CHECK DEVICE MODEL NO.

Do not use the procedures discussed here on any other Galaxy S2 (including the Galaxy S2 variant at T-Mobile, AT&T, US Cellular and other International variants) or any other device of Samsung or any other company. You have been warned!

  STEP 1: BACKUP YOUR DEVICE

Back up important data and stuff before you start playing around here as there are chances you might lose your apps and app-data (app settings, game progress, etc.), and in rare case, files on the internal memory, too.

For help on Backup and Restore, check out our exclusive page on that linked right below.

► ANDROID BACK UP AND RESTORE GUIDE: APPS AND TIPS

  STEP 2: INSTALL LATEST DRIVER

You must have proper and working driver installed on your windows computer to be able to successfully root your Samsung Galaxy S2.

In case you’re not sure, follow the link below for a definitive guide for installing driver for your Samsung device on your computer.

► SAMSUNG DEVICES DRIVERS INSTALLATION GUIDE

  STEP 3: UPGRADE YOUR DEVICE TO GB27 BUILD

 Skip this step if you are already on the GB27 Build on your Samsung Galaxy S2.

This rooting technique only applies on the latest update of GB27. So before proceeding with the guide Update your Samsung Galaxy S2 to GB27.

If you are not sure on how to Update your device, here is a definitive guide on how to update your Epic 4G to GB27 Build.

   STEP 4: INSTALLATION INSTRUCTIONS

  DOWNLOADS   ONE CLICK EXTRACTOR   STEP-BY-STEP GUIDE

Important Note: Backup important files stored on internal SD card of your device, so that in case a situation arises requiring you to do a factory reset after flashing with Odin, which might delete internal sd card too, your files will remain safe on PC.

Disconnect the Sprint Galaxy S2 from PC if it is connected.

You will see a Odin Window with the title SPH-D710 GB27 Root Restore on it.

Boot your Sprint Samsung S2 into Download Mode:

Power off your phone first and wait for 6-7 seconds after display is off.

Press and hold these 3 buttons together until you see Warning! screen: Volume Down + Power.

Press Volume Up now to continue to Download Mode.

If you don’t get the Yelllow COM port, here are some troubleshooting tips:

Make sure you have installed driver for Sprint Galaxy S2 as said above in ‘Before you begin..’ section.

If you have already installed driver, then uninstall them and reinstall back.

Connect using a different USB port on your PC.

Try a different USB cable. The original cable that came with your phone should work best, if not, try any other cable that’s new and of good quality.

Reboot your phone and PC and then try again.

The phone will be rebooted automatically upon the completion of process.

FEEDBACK US!

It was easy to root your Sprint Galaxy S2, right?  Let us know how you plan to use root privileges on your Sprint Galaxy S2.

Your suggestions and queries, if any, are most welcomed!

Update Rogers Galaxy S3 Sgh

Known Bugs/Issues:

(As of December 15, 2013)

No issues reported yet.

Let’s see how to install the Android 4.4 KitKat on your Rogers Galaxy S3 SGH-I747R.

WARNING!

Warranty may be void of your device if you follow the procedures given on this page.

You only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components.

CHECK DEVICE MODEL NO.

Do not use the procedures discussed here on any other Galaxy S3 (including the S3 devices at Sprint, Verizon, T-Mobile, AT&T and the international ones) or any other device of Samsung or any other company. You have been warned!

BEFORE YOU BEGIN..

You must do this pre-installation stuff before attempting to install the ROM on your Rogers Galaxy S3 in order to avoid any complications later, and have a smooth and successful process.

GET THE LATEST CWM/TWRP RECOVERY

Make sure that you’ve latest version of the recovery of your choice installed on your device.

Older versions of both CWM and TWRP recoveries are not working with Android 4.4 based ROMs, throwing installation errors and WiFi bugs, therefore you need to use the latest version of either recovery. We believe TWRP v2.6.3.0 and above, and CWM v6.0.4.3 and above are working fine with Android 4.4 ROMs.

BACK UP YOUR DEVICE

Back up important data and stuff before you start playing around here as there are chances you might lose your apps and app-data (app settings, game progress, etc.), and in rare case, files on the internal memory, too.

For help on Backup and Restore, check out our exclusive page on that linked right below.

► ANDROID BACK UP AND RESTORE GUIDE: APPS AND TIPS

CHARGE YOUR DEVICE

If your android device powers off due to lack of battery while the process is underway, it could damage the device.

So, make sure your device is adequately charged — at least 50% battery of the device.

EXAMPLE VIDEO

If you haven’t used a custom recovery, either CWM or TWRP, before, to install a .zip file of a ROM on anything else, then we suggest you first watch a video of that, given right below, to get familiar with the process.

ROGERS GALAXY S3 ANDROID 4.4.2 KITKAT ROM

DOWNLOADS

Download the files given below and transfer them to a separate folder on your phone and remember the location.

GAPPS FILE ROM FILE

For latest version of the ROM, check the original page →

Reminder: Before you proceed, make sure you’ve transferred the files you downloaded above to a separate folder on your Rogers Galaxy S3 SGH-I747R.

STEP-BY-STEP GUIDE

Reminder: Make sure you’ve installed latest version of the recovery of your choice and have backed up your device adequately (including important data stored on internal memory) as mentioned in ‘Before you begin..‘ section above.

GUIDE FOR CWM RECOVERY USERS

Boot into recovery mode. For this:

Power off your device and wait for 5-10 seconds until the device is fully switched off.

For help, check out our Galaxy S3 Recovery Mode page.

Create a Nandroid Backup from recovery. It’s optional but very important to do, so that in case something goes wrong you can restore to current status easily. For making a Nandroid Backup, go to Backup And Restore » Backup.

Perform a Factory Reset (This will delete all apps and their settings and game progress). For this:

Select Wipe data/Factory reset, then select Yes on the next screen to confirm factory reset (screenshot)

First Install the ROM file:

└ Make sure to first flash the ROM file and then the Gapps file.

Reboot your device. For this, go back to the main menu of recovery and select reboot system now.

That’s all. Your phone will now reboot and it will take some time as it’ll be phone’s first boot after installing Android 4.4, be extremely excited for this!

Note: In case your device gets bootloop (stuck at logo while rebooting), just do a factory reset (step 3) and you will be fine.

GUIDE FOR TWRP RECOVERY USERS

Boot into recovery mode. For this:

Power off your device and wait for 5-10 seconds until the device is fully switched off.

For help, check out our Galaxy S3 Recovery Mode page.

Perform a Factory Reset (this will delete all apps and their settings and game progress). For this:

Tap on Wipe » then at the bottom of the screen do a Swipe on the ‘Swipe to factory reset‘ option (screenshot)

First Install the ROM file:

└ Make sure to first flash the ROM file and then the Gapps file.

Reboot your device. Go back to the main menu of recovery and tap on Reboot » then, tap on System to reboot your phone.

That’s all. Your phone will now reboot and it will take some time as it’ll be phone’s first boot after installing Android 4.4, be extremely excited for this!

Note: In case your device gets bootloop (stuck at logo while rebooting), just do a factory reset (step 3) and you will be fine.

FEEDBACK US!

It was easy to install Android 4.4 KitKat, right? Let us know how it tastes to you.

Your suggestions and queries, if any, are most welcomed!

Beanstalk Brings Android 4.4.2 Kitkat Update For T

Let’s see how to install the Android 4.4 KitKat Beanstalk ROM on your T-Mobile LG G2.

WARNING!

Warranty may be void of your device if you follow the procedures given on this page.

You only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components.

CHECK DEVICE MODEL NO.

To make sure your device is eligible with this, you must first confirm its model no. in ‘About device’ option under Settings. Another way to confirm model no. is by looking for it on the packaging box of your device. It must be D801!

Do not use the procedures discussed here on any other LG G2 variant or any other device of LG or any other company. You have been warned!

BEFORE YOU BEGIN..

You must do this pre-installation stuff before attempting to install the ROM on your T-Mobile G2 in order to avoid any complications later, and have a smooth and successful process.

GET CWM /TWRP RECOVERY FOR YOUR T-MOBILE LG G2

You will need either of CWM or TWRP recovery for your T-Mobile LG G2 installed on your device, to be able to install the Android 4.4 KitKat ROM on your device.

If you don’t have any, we suggest you search for any one of them and install it first before proceeding any further. Google is your friend!

BACK UP YOUR DEVICE

Back up important data and stuff before you start playing around here as there are chances you might lose your apps and app-data (app settings, game progress, etc.), and in rare case, files on the internal memory, too.

For help on Backup and Restore, check out our exclusive page on that linked right below.

► ANDROID BACK UP AND RESTORE GUIDE: APPS AND TIPS

CHARGE YOUR DEVICE

If your android device powers off due to lack of battery while the process is underway, it could damage the device.

So, make sure your device is adequately charged — at least 50% battery of the device.

EXAMPLE VIDEO

If you haven’t used a custom recovery, either CWM or TWRP, before, to install a .zip file of a ROM on anything else, then we suggest you first watch a video of that, given right below, to get familiar with the process.

DOWNLOADS

Download the files given below and transfer them to a separate folder on your phone and remember the location.

GAPPS FILE ROM FILE FOR T-Mobile LG G2, D801

For latest version of the ROM, check the original page →.

Reminder: Before you proceed, make sure you’ve transferred the files you downloaded above to a separate folder on your T-Mobile LG G2.

STEP-BY-STEP GUIDE

Make sure you have backed up your phone adequately (including important data stored on internal memory).

NOTE:

Older versions of both CWM and TWRP recovery are not working with Android 4.4 based ROMs, throwing installation errors and WiFi bugs, which is why you need to use the latest version of either recovery. We believe, TWRP v2.6.3.0 and above, and CWM v6.0.4.3 and above, are working fine with Android 4.4 ROMs.

GUIDE FOR CWM RECOVERY USERS

Boot your T-Mobile LG G2 into recovery mode. For this:

Power off your device and wait for 5-10 seconds until the device is fully switched off.

Press and hold Volume Down and Power buttons together until you see LG Logo, upon which, release them both for a second and then then press them both buttons again together until you Factory Hard Reset screen.

└ In Recovery mode, use Volume buttons to navigate Up and Down between options and use Power button to select an option.

Create a Nandroid Backup from recovery. It’s optional but very important to do, so that in case something goes wrong you can restore to current status easily. For making a Nandroid Backup, go to Backup And Restore »Backup.

Perform a Factory Reset (This will delete all apps and their settings and game progress). For this:

Select Wipe data/Factory reset, then select Yes on the next screen to confirm factory reset (screenshot)

First Install the ROM File:

└ Make sure to first flash the ROM file and then the Gapps file.

Reboot your device. For this, go back to the main menu of recovery and select reboot system now.

That’s all. Your phone will now reboot and it will take some time as it’ll be phone’s first boot after installing Android 4.4, be extremely excited for this!

Note: In case your device gets bootloop (stuck at logo while rebooting), just do a factory reset (step 3) and you will be fine.

GUIDE FOR TWRP RECOVERY USERS

Boot into recovery mode. For this:

Power off your device and wait for 5-10 seconds until the device is fully switched off.

Press and hold Volume Down and Power buttons together until you see LG Logo, upon which, release them both for a second and then then press them both buttons again together until you Factory Hard Reset screen.

└ In Recovery mode, use Volume buttons to navigate Up and Down between options and use Power button to select an option.

Perform a Factory Reset (this will delete all apps and their settings and game progress). For this:

Tap on Wipe » then at the bottom of the screen do a Swipe on the ‘Swipe to factory reset‘ option (screenshot)

First Install the ROM file:

└ Make sure to first flash the ROM file and then the Gapps file.

Reboot your device. Go back to the main menu of recovery and tap on Reboot » then, tap on System to reboot your phone.

That’s all. Your phone will now reboot and it will take some time as it’ll be phone’s first boot after installing Android 4.4, be extremely excited for this!

Note: In case your device gets bootloop (stuck at logo while rebooting), just do a factory reset (step 3) and you will be fine. ALSO, CWM recovery is preferred in place of TWRP to flash Android 4.4 ROMs.

FEEDBACK US!

It was easy to install Android 4.4 KitKat on your T-Mobile LG G2, right? Let us know how is it to your taste?

Your suggestions and queries, if any, are most welcomed!

Update the detailed information about Xwlpm – Official Android 4.0.4 Update For Galaxy S2 on the Hatcungthantuong.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!